红外光谱数据融合对栽培滇重楼产地鉴别*

目的 多样的环境因素使得不同产地栽培滇重楼的化学成分也丰富多样，不同居群栽培滇重楼的甾体皂苷类成分具有很大的差异，多源数据融合分析能更全面的表征药材化学信息，建立一个高效而准确的产地鉴别模型，为其资源合理开发利用提供依据。方法 以来自云南和四川的8个产地（保山、楚雄、大理、红河、丽江、成都、文山、玉溪）共366份栽培滇重楼根茎为实验材料，采集其傅里叶变换近红外光谱（FT-NIR）和衰减全反射-傅里叶变换中红外光谱（ATR-FTMIR）数据。采用Kennard-Stone算法将不同产地的样品分为2/3的训练集和1/3的预测集，基于4种特征变量提取方法（CARS、VIP、SPA、SO-Covsel）结合2种数据融合策略（低级数据融合和中级数据融合），建立偏最小二乘产地判别分析模型。根据模型参数交叉验证均方根误差（RMSECV）和预测均方根误差（RMSEP）评估模型的稳定性，模型训练集和预测集准确率（ACC）评估模型分类性能。结果 近红外光谱和中红外光谱均能反应不同产地栽培滇重楼的化学成分差异，在中级数据融合中，基于VIP和SPA提取的特征变量建立的模型正确率均大于94%。相较于中级数据融合，低级数据融合模型得到了最为满意的结果，其预测集分类正确率达到100%。结论 根据近红外和中红外数据建立的低级数据融合PLS-DA模型，能够用于栽培滇重楼的产地鉴别分析。     

外伤性晶状体脱位合并周边隐匿性视网膜病变的临床特征及预后分析

目的观察分析眼球钝挫伤合并外伤性晶状体脱位患者周边隐匿性视网膜病变的临床特点及预后。 方法本研究纳入2013年1月至2020年1月在柳州市人民医院眼科住院诊断为眼球钝挫伤合并外伤性晶状体脱位，并行23G微创玻璃体切割联合白内障摘除手术的72例（72眼）患者。根据裂隙灯和超声生物显微镜（UBM）检查，将患者分为晶状体不全脱位组和全脱位组，详细记录2组患者的术中周边视网膜病变情况，并分析其临床特征及疗效。 结果眼球钝挫伤合并外伤性晶状体脱位患者中有周边隐匿性视网膜病变的占72.22%，其中晶状体不全脱位组发生率高达80.95%，显著大于晶状体全脱位组的60.00%（P＜0.05）。2组患者的周边隐匿性视网膜病变均以隐匿性视网膜裂孔、变性和出血为最常见。所有患者术后视网膜情况稳定，视力预后较好。 结论眼球钝挫伤合并外伤性晶状体脱位患者常出现周边隐匿性视网膜病变，最常见的是视网膜裂孔、出血、变性。23G微创玻璃体切割联合白内障摘除手术是有效治疗手段，具有创伤小、并发症少的优势。     

A customized metal guide for controllable modification of anterior teeth contour prior to minimally invasive preparation

ObjectiveOptimal tooth reduction is a key requirement for aesthetics, function, and the longevity of fixed restorations. Research has demonstrated that controlled and conservative tooth preparation is crucial for the long-term success of adhesive restorations. Different techniques of fabricating reduction guides have been previously reported in literature. The present technical note describes the fabrication technique and clinical application of a customized metal preparation reduction guide.Material and methodPatient presented with tilted maxillary left central incisor. The flared-out part of the tooth was modified prior to veneer restoration preparation. Resin pattern reduction guide was fabricated on the diagnostic cast with a window on the tilted mesial portion of the tooth. After intraoral evaluation, resin pattern guide was casted. Metal reduction guide was place intraorally and reduction was provided on the exposed surface of the tooth. After the removal of the tilted portion, a harmonious arch form allowed the clinician to provide adequate evaluation and preparation for veneer restorations.ResultsThe device demonstrated good practical value, allowing for selective and controlled reduction of tooth structure, and definitive protection of adjacent tooth surfaces from iatrogenic damage. The clinical outcome successfully addressed the patient’s restorative and aesthetic needs, and the veneer was stable 2 years postoperatively.ConclusionUse of a metal guide assists clinicians to provide a more predictable reduction of a desired tooth surface, while decreasing the risk of compromising the other/adjacent tooth surfaces.     

Research of connective tissue dysplasia influence on teething

PurposeThis work aimed to study the rate and quality of maturation of the mineral component of retained teeth 3.8, 4.8 and lower jaw fragment of a human in connective tissue dysplasia in different periods of postpartum ontogenesis.MethodsThe study involved 102 men (76 with connective tissue dysplasia and 26 without connective tissue dysplasia) divided into groups by age: 31–40, 41–50, 51–60 years. One tooth 3.8, 4.8 and a fragment of the alveolar part of the lower jaw in the projection of teeth 3.8, 4.8 0.5*0.5 cm in size were extracted from each examinee for medical indications.ResultsLow optical density values are observed at the age of 41–50 years, at the age of 51–60 years, indicating decreased mineral density and the presence of total areas of hypomineralization from the age 31–40 years in connective tissue dysplasia. At the age of 41–50, 51–60 years, at the boundary of connective tissue structures and periosteum, a pronounced sclerosis and deformation of delineation elements were observed; at the age of 31–40 years, the indicated changes were less pronounced. At the age of 31–40 years, the level of bone plate dissection has a local character, after 40 years, it has a generalized character.ConclusionProgressive osteoporosis of the mandible and incomplete amelogenesis are an obstacle to the correct and harmonious teething of the lower wisdom teeth after the age of 30.     

Insights into the pathogenesis of ATP1A1‐related CMT disease using patient‐specific iPSCs

The development of patient‐specific induced pluripotent stem cells (iPSCs) offered interesting insights in modeling the pathogenesis of Charcot‐Marie‐Tooth (CMT) disease and thus we decided to explore the phenotypes of iPSCs derived from a single CMT patient carrying a mutant ATP1A1 allele (p.Pro600Ala). iPSCs clones generated from CMT and control fibroblasts, were induced to differentiate into neural precursors and then into post‐mitotic neurons. Control iPSCs differentiated into neuronal precursors and then into post‐mitotic neurons within 6‐8 days. On the contrary, the differentiation of CMT iPSCs was clearly defective. Electrophysiological properties confirmed that post‐mitotic neurons were less mature compared to the normal counterpart. The impairment of in vitro differentiation of CMT iPSCs only concerned with the neuronal pathway, because they were able to differentiate into mesendodermal cells and other ectodermal derivatives. ATP1A1 was undetectable in the few neuronal cells derived from CMT iPSCs. ATP1A1 gene mutation (p.Pro600Ala), responsible for a form of axonal CMT disease, is associated in vitro with a dramatic alteration of the differentiation of patient‐derived iPSCs into post‐mitotic neurons. Thus, the defect in neuronal cell development might lead in vivo to a decreased number of mature neurons in ATP1A1‐CMT disease.     

Robotic left-sided colorectal resection with natural orifice IntraCorporeal anastomosis with extraction of specimen: The NICE procedure. A pilot study of consecutive cases

Background

Despite numerous benefits, only a small fraction of laparoscopic left-sided colectomy is accomplished without the need for an abdominal incision to retrieve the specimen and prepare for anastomosis. We report our early experience with a robotic approach using Natural orifice IntraCorporeal anastomosis with Extraction of specimen (NICE) to help overcome the technical limitations and challenges of this approach.