儿童新型冠状病毒感染诊断、治疗和预防专家共识(第二版)

自2019年12月新型冠状病毒感染暴发以来,我国政府采取了严格的防控措施,国内疫情已得到初步控制,但形势依然严峻,境外多个国家也相继出现疫情。根据世界卫生组织的报告:截至2020年3月5日,全球共报告95333例确诊病例(其中我国累计报告确诊病例80565例),85个国家有确诊病例报告,中国将面临输入性病例的传播风险,这为防治我国儿童的疾病疫情提出了新的挑战[1]。在这次疫情中,与成人病例相比,儿童病例相对较少、症状轻、预后较好。目前国内病例数据显示,18岁以下儿童占所有报告病例的2.4%,尚无死亡病例报告[2]。     

论当前疾病预防控制体系面临的主要问题

对当前的疾病预防控制体系和机构面临的体系不健全、政府投入不充分、事业发展不平衡、人才缺失和能力不足、缺乏系统的理论指导、体系的碎片化严重、与社会经济发展的战略衔接不力、机构内部内生动力和活力不足以及体系治理能力不足等问题做了讨论分析,以期进一步分析在健康中国战略和事业单位机构改革等宏观环境变化所带来的机遇以及疾控体系的发展策略和具体措施,促进疾病预防控制事业在改革中谋发展。     

A novel cysteine-sparing G73A mutation of NOTCH3 in a Chinese CADASIL family

neurogenetics - Cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy (CADASIL) is the most common monogenic disease leading to stroke and vascular dementia....     

Comparison of microtransplantation,chemotherapy and allogeneic transplantation in post-remission therapy for Philadelphia chromosome-positive acute lymphoblastic leukemia

Patients with Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph⁺ ALL) have poor prognosis, and the efficacy of chemotherapy plus tyrosine kinase inhibitors (TKIs) followed by mismatched donor stem cell infusion (microtransplantation, MST) has not been determined. We retrospectively summarized 45 patients including 11 undergoing MST with TKIs, 17 receiving allogeneic transplant and 17 undergoing chemotherapy with TKIs. Improved 4-year overall survival rate was observed in the MST group (91%) compared with either transplant group (31%, P = .005) or chemotherapy group (36%, P = .013). The MST group also had higher 2-year and 4-year leukemia-free survival rates (91% and 72%, respectively) compared with either transplant group (33%, P = .005 and 33%, P = .021, respectively) or chemotherapy group (41%, P = .017 and 31%, P = .023, respectively). 2-year and 4-year cumulative incidences of hematologic relapse were lower in the MST group (9% and 28%, respectively) compared with those in the chemotherapy group (56%, P = .025 and 67%, P = .034, respectively). In patients undergoing MST, donor microchimerism was detected (1.07 × 10^-5 to 6.6 × 10^-4 copies from 9 to 1499 days) in 7 patients, and donor/patient-derived HLA*0201/2402⁺WT1⁺CD8⁺ T cells were found from 0.05% to 0.67% in 6 patients. MST may provide a favorable treatment for patients with Ph⁺ ALL.     

醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响

目的　探究醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响。方法　Wistar大鼠36只，随机分为对照组、模型组、转染组，后两组建立糖尿病大鼠模型。模型建立成功后，构建含有晚期糖基化终末产物受体siRNA的质粒并利用慢病毒转染入转染组大鼠体内。造模后4周、8周、12周，记录各组大鼠体质量及空腹血糖。造模后9周，禁食6 h，测定口服葡萄糖耐量。造模后12周，处死全部大鼠后，TUNEL法检测各组大鼠视网膜神经元凋亡情况，荧光分光光度计测定醛糖还原酶活性，Western blotting法测定晚期糖基化终末产物受体的表达，RT-PCR检测视网膜中Bcl-2和Bax mRNA相对表达量。结果　造模后4周、8周、12周，转染组和模型组的大鼠体质量均低于对照组（均为P<0.05）；造模后12周，转染组大鼠体质量高于模型组（P<0.05）。造模后4周、8周、12周，各组内大鼠空腹血糖水平均无明显变化（均为P>0.05），转染组和模型组大鼠的空腹血糖水平均高于对照组（均为P<0.05）。模型组和转染组大鼠在口服葡萄糖后30 min时，血糖水平均高于对照组（均为P<0.05）；在120 min时分别下降至最低，但仍高于对照组（均为P<0.05）。模型组和转染组的视网膜神经元凋亡指数、醛糖还原酶活性、晚期糖基化终末产物受体和Bax mRNA相对表达量均高于对照组（均为P<0.05），且转染组均高于模型组（均为P<0.05）。模型组和转染组的Bcl-2 mRNA相对表达量均低于对照组（均为P<0.05），转染组低于模型组（P<0.05）。结论　晚期糖基化终末产物结合受体后产生大量的氧自由基损伤，可能是导致糖尿病视网膜神经元凋亡，进而导致糖尿病视网膜病变发生的机制之一。     

Patient preferences and predicted relative uptake for targeted therapies in metastatic colorectal cancer: a discrete choice experiment

Abstract

Objective

Ras wild-type metastatic colorectal cancers (mCRC) may be treated with anti-vascular endothelial growth factor (VEGF) or anti-epidermal growth factor receptor (EGFR) agents. We aim to estimate patients’ preferences for mCRC treatment and relative importance of cost, efficacy improvement, avoidance of side effects and therapy convenience, and relative uptake between profiles that resemble Bevacizumab (anti-VEGF) and Cetuximab (anti-EGFR), two commonly prescribed mCRC targeted therapies.     

广西防城港市2017年活禽市场环境样本禽流感监测

目的 了解防城港市活禽市场环境禽流感病毒监测情况,为科学评判疫情并采取适当的防控措施提供理论依据。方法 2017年3—4月在全市活禽市场外环境采集笼具擦物、冼禽污水、禽粪、砧板擦物、禽类饮用水等标本,用荧光定量PCR法检测禽流感病毒FluA、H5、H9、H7核酸,并进行统计学分析。结果 采集全市36个活禽市场外环境标本1 855份,阳性393份,阳性率为21.19%,其中H5阳性28份,H7阳性2份,H9阳性198份,H5和H9混合阳性37份,其他亚型（FluA阳性,H5、H7、H9 阴性）128份;不同地区标本阳性率差异有统计学意义（P<0.05）;城区和乡镇市场采集的标本的阳性率差异无统计学意义。5种类型的标本中,洗禽污水的阳性率最高,其次是砧板擦物, 再次是禽类饮用水和笼具擦物,禽粪的阳性率最低,差异有统计学意义（P<0.05）。结论 防城港市活禽市场环境普遍存在高致病性禽流感病毒的污染,H9亚型是主要的病原体,采取了综合防控措施后,防城港市没有发生人间禽流感疫情。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.