衰减伪影对冠心病患者门控心肌灌注显像图像质量及灌注结果的影响

目的探讨衰减伪影对冠心病患者门控心肌灌注显像(GMPI)图像质量及灌注结果的影响。资料与方法回顾性分析2020年3月—2021年3月在郑州大学第一附属医院核医学科经冠状动脉造影证实且于造影前后1周行GMPI的99例冠心病患者的图像,定性及半定量分析衰减校正前后GMPI图像结果,比较衰减校正前后左心室各壁段平均放射性计数及灌注结果的差异,进一步分析衰减校正前后灌注结果不一致部分的受检者的节段性室壁运动及增厚情况。结果与衰减校正前比较,衰减校正后左心室间隔、下后壁及侧壁的平均放射性计数较高(Z=-7.302、-8.014、-3.991,P均<0.001),心尖部较低(Z=-8.021,P<0.001)。其中女性衰减校正后前壁平均放射性计数减低(Z=-2.314,P=0.021)。男性衰减校正前后下后壁放射性计数差值明显高于女性(t=-8.408,P<0.05)。衰减校正后44%(44/99)的左前降支及37%(37/99)的右冠状动脉分支供血区域显像结果发生改变,结合超声心动图及GMPI结果显示其中85%(35/41)的左前降支及81%(29/36)的右冠状动脉分支供血区域室壁运动及室壁增厚率均正常。结论衰减伪影对GMPI的图像质量和灌注结果有较大影响,结合室壁运动和增厚情况等有助于鉴别衰减伪影,提高诊断准确度与特异度。     

A Priori Subcell Limiting Approach for the FR/CPR Method on Unstructured Meshes

A priori subcell limiting approach is developed for high-order flux reconstruction/correction procedure via reconstruction (FR/CPR) methods on two-dimensional unstructured quadrilateral meshes. Firstly, a modified indicator based on modal energy coefficients is proposed to detect troubled cells, where discontinuities exist. Then, troubled cells are decomposed into nonuniform subcells and each subcell has one solution point. A second-order finite difference shock-capturing scheme based on nonuniform nonlinear weighted (NNW) interpolation is constructed to perform the calculation on troubled cells while smooth cells are calculated by the CPR method. Numerical investigations show that the proposed subcell limiting strategy on unstructured quadrilateral meshes is robust in shock-capturing.     

Effects of anteriorly-loaded treadmill walking on dynamic gait stability in young adults

BackgroundAnteriorly-loaded walking is common in many occupations and may increase fall risk. Dynamic gait stability, defined by the Feasible Stability Region (FSR) theory, quantifies the kinematic relationship between the body’s center of mass (COM) and base of support (BOS). FSR-based dynamic gait stability has been used to evaluate the fall risk.Research questionHow does front load carriage affect dynamic gait stability, step length, and trunk angle among young adults during treadmill walking?MethodsIn this between-subject design study, 30 healthy young adults were evenly randomized into three load groups (0%, 10%, or 20% of body weight). Participants carried their assigned load while walking on a treadmill at a speed of 1.2 m/s. Body kinematics were collected during treadmill walking. Dynamic gait stability (the primary variable) was calculated for two gait events: touchdown and liftoff. Step length and trunk angle were measured as secondary variables. One-way analysis of variance was conducted to detect any group-related differences for all variables. Post-hoc analysis with Bonferroni correction was performed when main group differences were found.ResultsNo significant differences but medium to large effect sizes were found between groups for dynamic gait stability at touchdown (p = 0.194, η² = 0.114) and liftoff (p = 0.122, η² = 0.139). Trunk angle significantly increased (indicating backward lean) with the front load at touchdown (p < 0.001, η² = 0.648) and liftoff (p < 0.001, η² = 0.543). No significant between-group difference was found related to the step length (p = 0.344, η² = 0.076).SignificanceCarrying a front load during walking significantly alters the trunk orientation and may change the COM-BOS kinematic relationship and, therefore, fall risk. The findings could inform the design of future studies focusing on the impact of anterior load carriage on fall risk during different locomotion.     

The apex angle of the rocker sole affects the posture and gait stability of healthy individuals

BackgroundRocker sole (RS) shoes have been linked to impaired postural control. However, which features of RS design affect balance is unclear.Research questionWhich RS design features affect standing balance and gait stability?MethodsThis study utilized an intervention and cross-over design. Twenty healthy young adults (10 males and 10 females) participated in this study. Standing balance and gait stability were measured using a single force platform and three-dimensional motion analysis system, respectively. The experimental conditions included the control shoe and five RS shoes in the combination of apex position (%) and apex angle (degree) for RS50-95, RS60-95, RS70-95, RS60-70, and RS60-110. The main outcome measures were the area surrounding the maximal rectangular amplitude, mean path length, average displacement of the center of pressure along the lateral and anterior/posterior directions, and maximal center of pressure excursion as the standing balance and lateral margin of stability as the gait stability. Statistical analyses were conducted using a two-way split-plot analysis of variance with repeated measures (with RS design as the within-subject factor and sex as the between-subject factor) and the Bonferroni post hoc test (α = .05).ResultsRegarding the mean path length, RS60-70 was significantly longer than the control shoe, and it showed a significantly increased lateral margin of stability. Thus, RS60-70 was shown to affect standing balance, limit of stability, and gait stability of the frontal plane during gait.SignificanceThese results suggest that the apex angle of the RS design feature affects standing balance and gait stability, and RS60-70 is detrimental to stability. Therefore, when RS with a small apex angle is prescribed, it is necessary to consider the patient’s balance ability.     

Comparison of screw fixation versus non-fixation in dorsal opening wedge medial cuneiform osteotomy of adult acquired flatfoot

BackgroundThe aim of this study was to compare the radiographic and functional results between fixation and non-fixation in the Cotton osteotomy for the treatment of adult acquired flatfoot.MethodsA retrospective, case-controlled study of consecutive stage IIB posterior tibial tendon dysfunction (PTTD) patients treated with the same bony reconstructive surgery including cotton osteotomy between 2013 and 2017. Meary’s angle, the medial arch sag angle (MASA), and medial cuneiform cobb angle (MCCA) were evaluated pre-operation, at first weight bearing after surgery, and 12 months post operation.ResultsForty feet were included in the study. The cotton osteotomy utilized screw fixation (n = 20) or non-fixation technique (n = 20). No significant differences between groups were found in pre-operative and follow-up radiographic parameters, union rate, and functional results.ConclusionThe non-fixation with press fit technique is a reliable procedure for Cotton osteotomy and as effective as screw fixation.Level of evidenceLevel III, case control study     

调整Kappa角及光学切削直径对准分子激光原位角膜磨镶术后的影响

目的　评价调整光学切削直径及Kappa角后对准分子激光原位角膜磨镶术（laser in situ keratomileusis，LASIK）后效果的影响。方法　选取2017年1月至12月在我院行LASIK手术的高度近视患者313例（626眼），根据切削直径分成两组，试验组157例314眼，切削直径设定为6.0 mm，对照组156例312眼，切削直径设定为6.5 mm。试验组患者激光切削前修正Kappa角，对照组不做修正。患者术前进行裸眼视力、主视眼确定、验光、眼压、暗室下瞳孔直径、泪液分泌试验、裂隙灯、散瞳验光、眼底检查、pentacam测量角膜厚度、角膜地形图测量角膜前后表面及Kappa角等检查。术后1 d、1周、1个月随访，并检查裸眼视力、角膜厚度、波前像差及夜间视力、光晕、眩光等情况。比较两组患者角膜厚度变化、手术所用时间以及两组患者术后的高阶像差的差异。结果　试验组与对照组患者年龄分别为18～44（24.19±5.33）岁、18～42（25.08±4.91）岁，屈光度分别为（-7.47±1.04）D、（-7.61±1.12）D。两组年龄、屈光度比较差异均无统计学意义（均为P>0.05）。试验组与对照组患者术前Kappa角分别为，X轴:（210±40）μm、（200±30）μm，Y轴:（190±30）μm、（220±40）μm，差异无统计学意义（P=0.210）。两组手术前后的角膜厚度及术后角膜基质床的厚度差异均无统计学意义（均为P>0.05）。试验组与对照组的手术时间分别为（15.56±1.89）s和（20.83±3.03）s，差异有统计学意义（P=0.000）。试验组的总高阶像差和垂直慧差的变化均明显低于对照组（均为 P<0.01），但两组间的水平慧差差异无统计学意义（P>0.05），对照组的球差低于试验组（P<0.01）。结论　LASIK手术中科学合理地调整Kappa角可有助于提高患者术后的视觉质量。     

改良三点式重睑成形术的临床应用研究

目的:探讨改良三点式重睑术的临床应用疗效。方法:2012年6月-2019年6月,共165例单睑患者采用了改良三点式重睑术,沿术前标记线将三点处皮肤切开,剪刀将切口下唇的眼轮匝肌适当去除,同时将切口与切口在皮下层打通,剪除切口与切口之间的眼轮匝肌,6-0可吸收线挂睑板前筋膜或提上睑肌腱膜及切口下唇皮下组织缝合,三点切口各缝1针。再用6-0单丝尼龙线按照常规重睑线缝合方法挂切口下唇皮肤、睑板前筋膜或提上睑肌腱膜及切口上唇皮肤缝合打结,三点切口各缝1针。伴内眦赘皮者同时行内眦赘皮矫正术。结果:152例患者获得随访,随访患者大部分获得了比较满意的重睑,睁眼重睑流畅、自然,闭眼刀口痕迹不明显。2例患者出现内侧重睑线变浅,1例患者出现外侧重睑线变浅,所有患者均未出现重睑消失。5例患者双侧重睑线有轻度不对称。患者总体满意率为94.7%(144/152)。结论:改良三点式重睑术具有创伤小、并发症少、效果逼真、不易脱落、手术痕迹不明显等优点,值得推广应用。     

Vestibular Function Measurement Devices

Vestibular function laboratories utilize a multitude of diagnostic instruments to evaluate a dizzy patient. Caloric irrigators, oculomotor stimuli, and rotational chairs produce a stimulus whose accuracy is required for the patient response to be accurate. Careful attention to everything from cleanliness of equipment to threshold adjustments determine on a daily basis if patient data are going to be correct and useful. Instrumentation specifications that change with time such as speed and temperature must periodically be checked using calibrated instruments.