Effects of anteriorly-loaded treadmill walking on dynamic gait stability in young adults

BackgroundAnteriorly-loaded walking is common in many occupations and may increase fall risk. Dynamic gait stability, defined by the Feasible Stability Region (FSR) theory, quantifies the kinematic relationship between the body’s center of mass (COM) and base of support (BOS). FSR-based dynamic gait stability has been used to evaluate the fall risk.Research questionHow does front load carriage affect dynamic gait stability, step length, and trunk angle among young adults during treadmill walking?MethodsIn this between-subject design study, 30 healthy young adults were evenly randomized into three load groups (0%, 10%, or 20% of body weight). Participants carried their assigned load while walking on a treadmill at a speed of 1.2 m/s. Body kinematics were collected during treadmill walking. Dynamic gait stability (the primary variable) was calculated for two gait events: touchdown and liftoff. Step length and trunk angle were measured as secondary variables. One-way analysis of variance was conducted to detect any group-related differences for all variables. Post-hoc analysis with Bonferroni correction was performed when main group differences were found.ResultsNo significant differences but medium to large effect sizes were found between groups for dynamic gait stability at touchdown (p = 0.194, η² = 0.114) and liftoff (p = 0.122, η² = 0.139). Trunk angle significantly increased (indicating backward lean) with the front load at touchdown (p < 0.001, η² = 0.648) and liftoff (p < 0.001, η² = 0.543). No significant between-group difference was found related to the step length (p = 0.344, η² = 0.076).SignificanceCarrying a front load during walking significantly alters the trunk orientation and may change the COM-BOS kinematic relationship and, therefore, fall risk. The findings could inform the design of future studies focusing on the impact of anterior load carriage on fall risk during different locomotion.     

The apex angle of the rocker sole affects the posture and gait stability of healthy individuals

BackgroundRocker sole (RS) shoes have been linked to impaired postural control. However, which features of RS design affect balance is unclear.Research questionWhich RS design features affect standing balance and gait stability?MethodsThis study utilized an intervention and cross-over design. Twenty healthy young adults (10 males and 10 females) participated in this study. Standing balance and gait stability were measured using a single force platform and three-dimensional motion analysis system, respectively. The experimental conditions included the control shoe and five RS shoes in the combination of apex position (%) and apex angle (degree) for RS50-95, RS60-95, RS70-95, RS60-70, and RS60-110. The main outcome measures were the area surrounding the maximal rectangular amplitude, mean path length, average displacement of the center of pressure along the lateral and anterior/posterior directions, and maximal center of pressure excursion as the standing balance and lateral margin of stability as the gait stability. Statistical analyses were conducted using a two-way split-plot analysis of variance with repeated measures (with RS design as the within-subject factor and sex as the between-subject factor) and the Bonferroni post hoc test (α = .05).ResultsRegarding the mean path length, RS60-70 was significantly longer than the control shoe, and it showed a significantly increased lateral margin of stability. Thus, RS60-70 was shown to affect standing balance, limit of stability, and gait stability of the frontal plane during gait.SignificanceThese results suggest that the apex angle of the RS design feature affects standing balance and gait stability, and RS60-70 is detrimental to stability. Therefore, when RS with a small apex angle is prescribed, it is necessary to consider the patient’s balance ability.     

Comparison of screw fixation versus non-fixation in dorsal opening wedge medial cuneiform osteotomy of adult acquired flatfoot

BackgroundThe aim of this study was to compare the radiographic and functional results between fixation and non-fixation in the Cotton osteotomy for the treatment of adult acquired flatfoot.MethodsA retrospective, case-controlled study of consecutive stage IIB posterior tibial tendon dysfunction (PTTD) patients treated with the same bony reconstructive surgery including cotton osteotomy between 2013 and 2017. Meary’s angle, the medial arch sag angle (MASA), and medial cuneiform cobb angle (MCCA) were evaluated pre-operation, at first weight bearing after surgery, and 12 months post operation.ResultsForty feet were included in the study. The cotton osteotomy utilized screw fixation (n = 20) or non-fixation technique (n = 20). No significant differences between groups were found in pre-operative and follow-up radiographic parameters, union rate, and functional results.ConclusionThe non-fixation with press fit technique is a reliable procedure for Cotton osteotomy and as effective as screw fixation.Level of evidenceLevel III, case control study     

调整Kappa角及光学切削直径对准分子激光原位角膜磨镶术后的影响

目的　评价调整光学切削直径及Kappa角后对准分子激光原位角膜磨镶术（laser in situ keratomileusis，LASIK）后效果的影响。方法　选取2017年1月至12月在我院行LASIK手术的高度近视患者313例（626眼），根据切削直径分成两组，试验组157例314眼，切削直径设定为6.0 mm，对照组156例312眼，切削直径设定为6.5 mm。试验组患者激光切削前修正Kappa角，对照组不做修正。患者术前进行裸眼视力、主视眼确定、验光、眼压、暗室下瞳孔直径、泪液分泌试验、裂隙灯、散瞳验光、眼底检查、pentacam测量角膜厚度、角膜地形图测量角膜前后表面及Kappa角等检查。术后1 d、1周、1个月随访，并检查裸眼视力、角膜厚度、波前像差及夜间视力、光晕、眩光等情况。比较两组患者角膜厚度变化、手术所用时间以及两组患者术后的高阶像差的差异。结果　试验组与对照组患者年龄分别为18～44（24.19±5.33）岁、18～42（25.08±4.91）岁，屈光度分别为（-7.47±1.04）D、（-7.61±1.12）D。两组年龄、屈光度比较差异均无统计学意义（均为P>0.05）。试验组与对照组患者术前Kappa角分别为，X轴:（210±40）μm、（200±30）μm，Y轴:（190±30）μm、（220±40）μm，差异无统计学意义（P=0.210）。两组手术前后的角膜厚度及术后角膜基质床的厚度差异均无统计学意义（均为P>0.05）。试验组与对照组的手术时间分别为（15.56±1.89）s和（20.83±3.03）s，差异有统计学意义（P=0.000）。试验组的总高阶像差和垂直慧差的变化均明显低于对照组（均为 P<0.01），但两组间的水平慧差差异无统计学意义（P>0.05），对照组的球差低于试验组（P<0.01）。结论　LASIK手术中科学合理地调整Kappa角可有助于提高患者术后的视觉质量。     

Vestibular Function Measurement Devices

Vestibular function laboratories utilize a multitude of diagnostic instruments to evaluate a dizzy patient. Caloric irrigators, oculomotor stimuli, and rotational chairs produce a stimulus whose accuracy is required for the patient response to be accurate. Careful attention to everything from cleanliness of equipment to threshold adjustments determine on a daily basis if patient data are going to be correct and useful. Instrumentation specifications that change with time such as speed and temperature must periodically be checked using calibrated instruments.     

Association of quadriceps angle with plantar pressure distribution,navicular height and calcaneo-tibial angle

ObjectiveThe aim of study was to analyze the association between Quadriceps Angle (QA) and plantar pressure, navicular height (NH), and calcaneo-tibial angle (CTA).MethodsA total of 64 volunteers (mean age: 22.25 ± 2.54 (range:19–33)) participated in this cross sectional study. EMED-m (Novel GmbH, Germany) electronic pedobarograph was employed for dynamic plantar pressure measurement using two step protocol. The angle between the vertical axis of calcaneus and the long axis of Achilles tendon for CTA. The height of navicular tubercle from the ground was measured while the subject was standing on both feet for NH. QA was measured while the subject was standing in a relaxed posture where both feet bearing equal weight.ResultsThere were significant negative correlations between QA and maximum force (MxF) under the 4th. metatarsal head (MH4). The QA was also significantly correlated with MxF and force-time integral (FTI) under the bigtoe (BT). FTI under the 3rd. metatarsal head (MH3), MH4 and 5th. metatarsal head (MH5) were significantly negatively correlated with QA. Pressure-time integral (PTI) under the MH4 and MH5 were found to be significantly negatively correlated with QA. A significant correlation was also found between QA and NH (p < 0.0001), whilst there was no correlation between QA and CTA. Regression analysis showed that NH was appeared as the major contributor for the QA (β = −0.49, p < 0.001) in the dynamic condition, followed by BT-FTI (β = 0.37, p < 0.001) and MH5-MxF (β = −0.21, p < 0.037).ConclusionThese findings may imply that the NH which can at least be controlled by appropriate shoe inserts may affect QA. This way, loading pattern of both plantar region and whole lower extremity may be altered.Level of evidenceLevel III, Diagnostic Study.     

口内入路下颌角弧线形截骨术

目的:探索更好的下颌角肥大截骨缩小术式。方法:为获得更好的术后效果,我们采用口内入路下颌角弧形截骨术,将弧形截骨线延长到颏神经处,并对颏结节进行打磨,使截骨线延续流畅,伴小颏者同时行隆颏或颏截骨前移。结果:自2002年以来,我科采用口内入路下颌角长弧线形截骨术矫正320例下颌角肥大患者,均取得了良好的效果。结论:口内入路延长弧形截骨术缩小下颌角可以获得更好术后效果。     

腰椎节段形态对峡部、小关节应力及小关节接触力影响的有限元分析

目的:探讨腰椎形态结构变化对峡部裂性滑脱及小关节退变的作用和意义。方法:采用改良的“非种子区域分割方法”及非平行“最佳切割平面”等一系列新型计算机辅助设计(CAD)方法精确建立包括椎间盘高度、腰椎小关节角、椎间盘前凸角改变的L4~L5活动节段有限元模型;在2700N轴向压缩载荷条件下,分别对各有限元模型的峡部、小关节应力、小关节接触力以及椎间盘负载进行测试。结果:压缩载荷下,腰椎活动节段峡部、小关节等效应力及小关节接触力随椎间盘高度的减小而减小,随小关节角的增大而增加,随椎间盘前凸角的增加而减小。结论:椎间盘高度、腰椎小关节角、椎间盘前凸角等形态结构变化对腰椎节段有限元模型的峡部、小关节应力及小关节接触力有明显的影响。提示腰椎峡部应力性骨折及小关节退变的发生与椎间盘高度、腰椎小关节角、椎间盘前凸角等解剖形态因素有关。