Morphological imaging and CT histogram analysis to differentiate pancreatic neuroendocrine tumor grade 3 from neuroendocrine carcinoma

PurposeTo compare morphological imaging features and CT texture histogram parameters between grade 3 pancreatic neuroendocrine tumors (G3-NET) and neuroendocrine carcinomas (NEC).Materials and methodsPatients with pathologically proven G3-NET and NEC, according to the 2017 World Health Organization classification who had CT and MRI examinations between 2006-2017 were retrospectively included. CT and MRI examinations were reviewed by two radiologists in consensus and analyzed with respect to tumor size, enhancement patterns, hemorrhagic content, liver metastases and lymphadenopathies. Texture histogram analysis of tumors was performed on arterial and portal phase CT images. images. Morphological imaging features and CT texture histogram parameters of G3-NETs and NECs were compared.ResultsThirty-seven patients (21 men, 16 women; mean age, 56 ± 13 [SD] years [range: 28-82 years]) with 37 tumors (mean diameter, 60 ± 46 [SD] mm) were included (CT available for all, MRI for 16/37, 43%). Twenty-three patients (23/37; 62%) had NEC and 14 patients (14/37; 38%) had G3-NET. NECs were larger than G3-NETs (mean, 70 ± 51 [SD] mm [range: 18 - 196 mm] vs. 42 ± 24 [SD] mm [range: 8 - 94 mm], respectively; P = 0.039), with more tumor necrosis (75% vs. 33%, respectively; P = 0.030) and lower attenuation on precontrast (30 ± 4 [SD] HU [range: 25-39 HU] vs. 37 ± 6 [SD] [range: 25-45 HU], respectively; P = 0.002) and on portal venous phase CT images (75 ± 18 [SD] HU [range: 43 - 108 HU] vs. 92 ± 19 [SD] HU [range: 46 - 117 HU], respectively; P = 0.014). Hemorrhagic content on MRI was only observed in NEC (P = 0.007). The mean ADC value was lower in NEC ([1.1 ± 0.1 (SD)] × 10⁻³ mm²/s [range: (0.91 - 1.3) × 10⁻³ mm²/s] vs. [1.4 ± 0.2 (SD)] × 10⁻³ mm²/s [range: (1.1 - 1.6) × 10⁻³ mm²/s]; P = 0.005). CT histogram analysis showed that NEC were more heterogeneous on portal venous phase images (Entropy-0: 4.7 ± 0.2 [SD] [range: 4.2-5.1] vs. 4.5 ± 0.4 [SD] [range: 3.7-4.9]; P = 0.023).ConclusionPancreatic NECs are larger, more frequently hypoattenuating and more heterogeneous with hemorrhagic content than G3-NET on CT and MRI.     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

阻塞性睡眠呼吸暂停低通气综合征患者CYP3A4基因多态性的检测

目的探讨阻塞性睡眠呼吸暂停低通气综合征(OSAHS)CYP3A4基因的多态性,了解其对芬太尼类药物的敏感性及不同基因型的人群分布特征,指导临床个体化用药。方法对50例OSAHS患者进行CYP3A4基因的多态性检测,采静脉血,通过DNA抽提-PCR扩增-焦磷酸测序方法检测CYP3A4基因。结果野生纯合型型34例(68%),突变杂合型15例(30%),突变纯合型型1例(2%)。结论OSAHS患者中约2%为AA型,该型对芬太尼类药物极其敏感,术后有易发生窒息的风险,应高度警惕芬太尼类药物呼吸抑制的潜在风险。     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

基于多元统计分析的银杏叶提取物中有机酸类成分含量研究

目的建立HPLC法测定银杏叶提取物中9种小分子有机酸类成分莽草酸、儿茶素、表儿茶素、没食子酸、原儿茶酸、6-羟基犬尿喹啉酸、对羟基苯甲酸、对羟基肉桂酸、咖啡酸含量的方法,并结合多元统计分析方法比较不同厂家生产的银杏叶提取物间质量差异。方法采用Inertsil ODS-3 C_(18)(250 mm×4.6 mm,5μm)色谱柱;以乙腈-0.4%磷酸水溶液为流动相,梯度洗脱,波长切换测定(220 nm检测莽草酸、儿茶素、表儿茶素,254 nm检测没食子酸、原儿茶酸、6-羟基犬尿喹啉酸、对羟基苯甲酸,310 nm检测对羟基肉桂酸、咖啡酸),柱温40℃。结果不同厂家生产的银杏叶提取物中有机酸总含量有差异,厂家内部样品中各有机酸含量同样存在差异。经聚类分析、主成分分析、相关与回归分析等多元统计方法分析,筛选出儿茶素、没食子酸、原儿茶酸及6-羟基犬尿喹啉酸为体现样品质量差异的特征成分,同时成分间具有内在相关性。结论建立的方法操作简便、重复性好、结果可靠,可用于银杏叶提取物中有机酸类成分的质量评价。筛选出的儿茶素、没食子酸、原儿茶酸及6-羟基犬尿喹啉酸是体现质量差异的特征成分,又是具有内在关联的共性成分,为提升银杏叶提取物整体质量控制能力提供了依据,同时表明银杏叶提取物的提取工艺并不统一,企业内部工艺的稳定性也有待提高。     

Effect of a Device-Free Compressed Shell Fixation Method on Hepatic Respiratory Movement: Analysis for Respiratory Amplitude of the Liver and Internal Motions of a Fiducial Marker

Purpose

Suppression of respiratory movement of the liver would be desirable for high-precision radiation therapy for liver tumors. We aimed to investigate the effect of our original device-free compressed shell fixation method and breathing instruction on suppression of respiratory movement. The characteristics of liver motion based on the movement of a fiducial marker were also analyzed.

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.