Differential Stripping: Determination of the Amount of Topically Applied Substances Penetrated into the Hair Follicles

The determination of penetration pathways of topically applied substances into the skin is the subject of several investigations. Recently, follicular penetration has become a major focus of interest. To date, a direct, non-invasive quantification of the amount of topically applied substance penetrated into the follicles had not been possible. The development of such a method was the aim of this study. Therefore, the advantages of both stripping techniques, tape stripping and cyanoacrylate skin surface biopsy, were combined and evaluated. Tape stripping was used to remove the part of the stratum corneum that contained the topically applied dye. Subsequently, the follicular contents were ripped off by cyanoacrylate skin surface biopsy. The combined method termed "differential stripping" was evaluated in vitro and in vivo , and the amount of topically applied fluorescent dye penetrated into the hair follicles was quantified after different penetration times. After 30 min, 5% of the recovered concentration of sodium fluorescein was found in the follicular infundibula, where it was still detectable after 48 h. Altogether, the results of this investigation revealed that differential stripping is a new method that can be used to study the penetration of topically applied substances into the follicular infundibula non-invasively and selectively.     

体表面积、体质量指数对老年骨质疏松的影响

目的探讨体表面积（BS）、体质量、体质量指数（BMI）对老年人骨密度（BMD）的影响。方法用双能X线骨密度仪测定1794例老年人腰椎、髋关节的BMD值，并对其与BS等指标进行相关回归分析。结果BS大的老年人其BMD大于BS小者，有显著性差异。在各种指标与BMD的相关性比较中，BS与BMD的相关性最好，其后依次为：体质量、身高、OSTA得分（亚洲人自我骨质疏松筛查工具）、BMI。结论BS比BMI等指标更能反映出人体体型对老年人BMD的影响。     

Surface modification of titanium by etching in concentrated sulfuric acid

OBJECTIVE: The purpose of this study was to characterize the etching behavior of titanium in concentrated sulfuric acid and discuss its application on surface modification of titanium for biological use. METHODS: Commercially pure titanium (cpTi) plate was etched in 48% H2SO4 at RT -90 degrees C for 0.25-8 h. The weight loss was derived from the weight differences before and after etching. The surfaces after etching were characterized by surface roughness, X-ray diffractometry, and scannning electron spectroscopy. The apparent activation energy of the dissolution of cpTi into acid was derived from an Arrhenius plot of the rate of weight loss versus the acid temperature. RESULTS: The surface roughness of cpTi increased with the acid temperature and etching time. The surface roughness was strongly related to the weight loss. The weight loss increased drastically with the acid temperature after an initial period, which shortened with increasing acid temperature. The apparent activation energy for the dissolution of cpTi in H2SO4 was derived as 67.8 kJ/mol. SIGNIFICANCE: This study indicates that etching with concentrated sulfuric acid is an effective way to modify the surface of titanium for biological applications.     

An imaging routine for assessing the efficacy of instruments used for scaling and root planning

Deposits of dental plaque or calculus are typically quantified using planimetric techniques. However, error is introduced into a quantitative analysis of plaque deposits using these methods, since they require a significant amount of human intervention. The purpose of this study is to describe and validate a computerized imaging routine which has the potential to objectively identify material on dental roots and measure the area covered by these deposits. Dentiform teeth with simulated plaque were videorecorded. A computer routine was developed based on a flood-fill algorithm which analyzed images of the dentiform teeth and determined the amount of simulated plaque on their root surfaces. Results showed that the dentiform teeth and their simulated plaque patterns are duplicated by the imaging routine in a rapid and reliable fashion. The system shows a high degree of accuracy with an average error factor of only 0.58%. As well, the system enables precise reproducibility with an average error factor of only 0.71%.     

D2-43病毒E蛋白在酵母细胞表面的展示

目的：在酵母细胞表面展示登革2型病毒43株(D2—43)的E基因，探索利用酵母表面展示系统建立DNA改组筛选平台的可行性。方法：通过RT-PCR扩增获得D2-43的E基因，将该基因亚克隆至T载体后，再克隆至酵母表面展示载体pYDI，于酿酒酵母EBY100中利用半乳糖进行诱导表达。表达产物采用间接免疫荧光法和FACS进行检测。结果：酵母表面展示产物可与D2-43的腹水抗体特异性地结合；在半乳糖诱导后24h，展示E蛋白的酵母细胞百分数达22．07％。结论：本研究为建立基于酵母表面展示系统的DNA改组筛选平台奠定了基础。     

高性能战斗机改装体检飞行员的耳功能分析

目的 分析高性能战斗机改装体检飞行员的咽鼓管功能、前庭功能和听功能状况。方法 对改装体检的196名飞行员的耳功能资料进行分析。结果 ①声导抗示196例392耳中193例368耳为A型曲线，6例7耳为AD型曲线，15例17耳为C型曲线。196例392耳均无声反射衰减；②眼震电图示196例前庭功能均正常：③纯音测听以气导在500、1000、2000、3000Hz的平均听阈表示，196例的结果为左耳12．58dB HL；右耳12．48dB HL，但37例47耳有高频区噪声性听损伤的表现。结论 参与高性能战斗机改装体检的飞行员，其耳功能状况总体良好，但部分有噪声性听损伤的应随访观察。     

聚苯醚热固性改性及其性能研究

通过溴化聚苯醚和格利雅试剂反应，将不饱和基团烯丙基引入聚苯醚中实现其热固性改性，由^1H-NMR和FTIR进行结构表征。确定了烯丙化聚苯醚的固化工艺，并对其固化产物性能进行测试。结果表明：按合成新工艺制备的热固性聚苯醚，其固化产物具有优异的介电性能(低介电常数、低介电损耗因子)，良好的耐溶剂性能和低吸湿性。     

骨髓细胞移植上调血管内皮生长因子及其受体的表达并改善缺血心脏功能

目的：通过骨髓细胞移植对心肌梗死大鼠模型血管内皮生长因子及其受体表达的影响，探讨骨髓细胞移植改善缺血心脏功能的可能机制。方法：利用左前降支冠状动脉结扎术制备大鼠心肌梗死模型，然后行异体骨髓细胞移植；分别于术后1d，3d，7d，14d和28d取材；利用免疫荧光和RT—PCR技术分析细胞移植对血管内皮生长因子(VEGF)及其受体(Flk一1)表达的影响和移植细胞的分化情况；通过免疫组化计算血管数量；应用血流动力学检测大鼠心脏功能在术后各时间点的变化。结果：VEGF和Flk-1在移植组动物的心肌梗死区残存细胞、梗死周边区细胞以及部分移植细胞内表达。移植组VEGF和Flk-1的mRNA表达明显高于对照组。分别于术后3d和14d达到高峰，以后逐渐减弱。术后7d，14d和28d移植组血管数量较同期对照组明显增加，移植组心脏功能较对照组明显改善。术后14d可在部分移植细胞中检测到心肌细胞或血管内皮细胞特异性蛋白的表达。结论：骨髓细胞移植通过上调移植细胞及受者内源性VEGF和Flk—1的表达，促进血管新生，进而改善缺血心脏功能。     

急性重度眼烧伤135例临床分析

目的了解急性重度眼烧伤的临床特点、预后及并发症发生情况。方法对笔者单位病案室保存的1977--2002年住院眼烧伤患者135例（155只眼）的病历进行回顾性统计分析。分析不同深度、原因眼烧伤的眼表修复率、修复时间、致盲情况及并发症。结果治疗后Ⅲ度眼烧伤的修复时间短于Ⅳ度眼烧伤，其修复率也明显高于Ⅳ度眼烧伤（P〈0．01）；在不能修复的Ⅳ度眼烧伤中，酸烧伤致角膜穿孔6只眼，显著高于碱烧伤（1只眼，P〈0．05）。Ⅲ度眼烧伤视力≥0．05者有38只眼，〈0．05者51只眼；Ⅳ度眼烧伤视力≥0．05者0只眼，〈0．05着66只眼。78只酸、碱烧伤眼中，52只眼致盲，致盲率为66．7％；77只热烧伤眼中，65只眼致盲，致盲率为84．4％。Ⅲ度眼烧伤的并发症发生率低于Ⅳ度眼烧伤。其中Ⅲ度眼烧伤角膜穿孔、睑球粘连的发生率（1．1％、36．O％）均显著低于Ⅳ度眼烧伤（27．3％、59．1％，P〈0．01）。在酸烧伤患者中，角膜穿孔及睑外翻的发生率（29．2％、37．5％）较高。而热烧伤患者中眼睑球粘连的发生率（53．2％）较高。结论Ⅳ度眼烧伤伤后的预后差，致盲率高。目前的治疗方法尚不能完全改善其视功能及预后，有待进一步研究。     

活性炭纤维在地方性氟中毒方面的应用展望

介绍了活性炭纤维（ＡＣＦｓ）的制造，特性及其应用。它具有优异的结耕与性能特征。含碳量高，比表面积大，微孔丰富，从而吸附力强，而且活性炭纤维还可制成纱、布、毡等形状，它可用于去除燃煤氟中毒区室内空气中氟化氢、二氧化硫、氧化氮、氨等污染物，利用它的高吸附性能还可较好的去除饮水中的氟化物及其他有害物质。活性炭纤维是一种新型高效吸附材料。在氟中毒防治方面有广阔的前途。