下颈椎经关节螺钉钉棒系统固定的生物力学研究

目的：比较下颈椎三柱损伤后单独经关节螺钉固定（TAS）、经关节钉棒系统同定（TRS）和侧块螺钉钉棒系统固定（LRS）的三维稳定性。方法：12具新鲜颈椎标本．制成C4／5、C5／6节段三柱损伤模型，分别进行单独经关节螺钉（TAS组）、经关节螺钉钉棒系统（TRS组）和侧块螺钉钉棒系统（LRS组）三种方法固定，在非限制性和非破坏性的实验条件下测试其前屈、后伸、左右侧弯和轴向旋转运动状态的稳定性。结果：TAS组和TRS组在各方向的运动范同（ROM）和中性区（NZ）的均数均显著小于完整标本组，差异有统计学意义（P〈0．05）；LRS组在前屈、后伸、侧弯运动中的ROM和NZ与完整标本组比较有显著降低，差异有统计学意义（P〈0．05）；LRS组在旋转运动中的ROM和NZ与完整标本组比较有不同程度的降低，但差异无统计学意义（P〉0．05）。TAS、TRS在各个方向稳定性明显优于LRS组（P〈0．05）。TRS在前屈运动中的ROM和NZ与TAS组比较有所减小，但无统计学意义（P〉0．05）；在后伸、侧弯和旋转运动中，TRS组稳定性明显优于TAS组，有统计学意义（P〉0．05）。结论：在下颈椎三柱损伤选择经关节固定技术时以钉棒形式同定稳定性更好。     

Anatomic comparison of transarticular screws with lateral mass screws in cervical vertebrae

Objective:To compare the potential incidence of nerve root (ventral and dorsal ramus) injury caused by cervical transarticular screws and Roy-Camille lateral mass screws. Methods:Insertion techniques with Klekamp transarticular screws and Roy-Camille lateral mass screws were respectively performed in this study. Each technique involved four specimens and 40 screws, which were inserted from C3 to C7. And 20-mm-long screws were used to overpenetrate the ventral cortex. The anterolateral aspect of the cervical spine was carefully dissected to allow observation of the screw-ramus relationship. Results : The overall percentage of nerve invasion was significantly lower with Klekamp (45 %) technique than with Roy-Camille (85%) technique (P<0.05). The largest percentage of nerve invasion for Klekamp transarticular screws was found at the dorsal ramus (25%), followed by the ventral ramus (15%) and the bifurcation of the ventral dorsal ramus (5 %). The largest percentage of nerve invasion for Roy-Camille lateral mass screws was found at the ventral ramus (80 %). Conclusion : The potential risk of nerve root invasion is lower with Klekamp transarticular screws than with Roy-Camille lateral mass screws.     

下颈椎经关节螺钉联合侧块或椎弓根螺钉固定的效果

Objective To discuss the effect of transarticular screws combined with lateral mass screws or pedicle screws through posterior approach in the lower cervical spine. Methods From February 2003 to October 2007, 22 patients were treated using transarticular screws internal fixation combined with lateral mass screws or pedicle screws in Axis plating system and Vertex system. There were cervical fracture and dislocation in 13 patients, ossification of the posterior longitudinal ligament in 4, cervical canal stenosis associated with dentoid process fracture in 1, and cervical disc herniation associated with cervical stenosis in 4 patients. Lamina or facet bone grafting were used to achieve a long-term stability, with decompression and anterior approach or not. The starting point for screw insertion was located 1 mm medial to the midpoint of the lateral mass and the direction of the screw was 40° caudally in the sagittal plane and 20° laterally in the axial plane. Results All screws insertion was successful. A total of 45 transarticular screws were inserted, with 2 in C4,5, 39 in C5,6 and 4 in C6,7. A total of 12 lateral mass screws were inserted, with 6 in C3 and 6 in C4. A total of 41 pedicle screws were inserted, with 4 in C2, 2 in C3 and 6 in C4, 21 in C7 and 8 in T1. There was no complication related to screw insertion, such as injury to the vertebral artery, nerve roots or spine cord. The follow-up period ranged from 10 months to 3 years and 8 months (mean 17 months). All cases got bone fusion. Only one instance of screw partial backout was identified, but fusion was achieved in all pa-tients. In the follow-up period, only one instance of screw partial backout was identified, but fusion was achieved in all patients. Conclusion The combined use of transarticular screws and lateral mass screws or pedicle screws fixation in the lower cervical spine can enlarge the advantages of strong stability,relatively simple, and reduce operating risk when performed appropriately.     

后外侧入路空心钉内固定治疗下胫腓后韧带止点撕脱后踝骨折

目的探讨后外侧入路空心钉内固定治疗下胫腓后韧带止点撕脱后踝骨折的疗效。方法采用后外侧入路空心钉内固定治疗26例三踝骨折中下胫腓后韧带止点撕脱后踝骨折,先行内、外踝骨折内固定,再行后踝骨折固定。结果本组均获平均15(10~24)个月随访,未出现切口感染、皮肤坏死等并发症。术后随访X线片未见内固定失败、断裂。踝关节骨折均于术后3~4个月愈合,平均3.5个月。结论后外侧入路空心钉内固定治疗下胫腓后韧带止点撕脱后踝骨折操作方便、复位精确、固定可靠,值得进一步推广。     

枢椎后路峡部螺钉固定的相关影像学测量

目的：通过CT测量探讨枢椎峡部螺钉固定技术的安全性和可行性。方法：收集2016年1月至2019年12月进行全颈椎CT检查的137例结构完整的上颈椎CT数据,其中男71例,女66例;年龄22~65（41.8±17.4）岁。通过Mimics19.0软件测量峡部螺钉技术相关的解剖学数据,包括峡部宽度、峡部垂直长度、峡部垂直高度、峡部螺钉通道长度、峡部螺钉通道头倾角度。并分析各项指标之间的相关性。结果：枢椎峡部宽度（9.05±1.63） mm,垂直长度（11.21±1.43） mm,垂直高度（17.53±2.93） mm。螺钉通道长度为（19.07±3.20） mm。峡部螺钉通道长度>14 mm的占94.53%,14~16 mm的占82.12%,16~18 mm的占63.14%,18~20 mm的占39.78%。螺钉通道的头倾角度为30°~68°,平均（46.06±8.06）°。螺钉通道长度和头倾角度呈高度正相关（r=0.965,P=0.000）。峡部垂直长度和螺钉通道长度,峡部垂直长度和螺钉的头倾角度之间都呈轻度正相关（r=0.240,P=0.000;r=0.163,P=0.007）。峡部宽度和螺钉通道长度,峡部宽度和螺钉通道的头倾角度之间都呈中度负相关（r=-0.333,P=0.000;r=-0.380,P=0.000）。结论：进行枢椎后路峡部螺钉固定安全、可靠,比枢椎后路椎弓根螺钉固定具有更大的适用范围,可以作为椎弓根螺钉的替代选择。     

后路寰椎后弓螺钉内固定研究进展

寰椎后弓螺钉内固定技术的提出,为治疗枕颈部不稳提供了新的补救方法。许多文献报道了寰椎后弓螺钉固定的可行性,初步显示了其置钉点易暴露、出血少、手术时间短等优势,尤其在侧块被肿瘤、炎症、创伤等破坏无法使用寰枢关节螺钉、寰椎侧块螺钉、椎弓根螺钉时补救固定。但如果外科医生术中操作不当,则可引起医源性骨折、椎动脉及颈脊髓损伤等严重并发症。因此,寰椎后弓螺钉内固定技术的安全性和有效性成为当下研究的热点。     

经枢椎椎板关节突关节螺钉固定的解剖学研究

枢椎承上启下,在解剖学上异于其他颈椎,具有更厚的椎板[1].目前临床常用的楸椎固定技术包括枢椎椎弓根螺钉、侧块螺钉、经C1,2关节螺钉.某些患者由于枢椎横突孔过大、枢椎峡部过小、短颈后凸畸形、单侧椎动脉畸形等解剖因素,使以上技术无法使用[2].     

枢椎经椎板螺钉固定的研究进展

椎(C2)螺钉无论是对于寰枢融合还是在下颈椎固定中均提供着重要的稳定性.目前临床常用的C2固定技术包括2椎弓根螺钉、侧块螺钉、经1/2关节螺钉和经2/3关节螺钉,以上技术均有着损伤椎动脉的风险.2004年Wright[1]首次提出2经椎板螺钉固定技术,并进行了10例临床应用,取得了良好的临床疗效.尽管2经椎板螺钉固定有其优点,但至今仍没有得到广泛的应用.     

颈椎一期前后路手术治疗颈椎骨折脱位患者的护理

严重创伤引起的下颈椎骨折脱位,往往需要颈椎固定和融合.一期前后路联合手术是目前治疗颈椎三柱损伤的有效方法之一.该手术包括前路行病变椎体次全切除,椎管减压,植骨融合,后路侧块螺钉和椎弓根螺钉固定.     

下颈椎经关节突关节椎弓根螺钉固定的可行性

目的:探讨下颈椎后路经关节突关节椎弓根螺钉固定的可行性和技术参数,为临床应用提供参考。方法:取20具颈椎标本,仔细解剖颈部的后侧和前侧方,清楚显露颈椎侧块和椎弓根。以侧块外下象限的中心点为进钉点,从C3/4～C6/7直视下经关节突关节置入椎弓根螺钉,通过CT重建,测量经关节突关节椎弓根螺钉内固定进钉角度和钉道长度。结果:经关节突关节椎弓根螺钉均成功置入,螺钉固定方向在矢状面呈尾倾,冠状面呈内倾,理想角度为在矢状面尾倾50.3°±4.9°,在冠状面内倾42.8°±4.0°。螺钉钉道长度为(34.1±1.4)mm,各固定节段间略有不同,但差异无统计学意义(P>0.05)。结论:下颈椎后路经关节突关节椎弓根螺钉固定是可行的,但置钉时要求较高的准确性,可以作为颈椎侧块螺钉和椎弓根螺钉固定的一种补充方法。