A Pilot First-in-Human Study of Embrace,a Polyethylene Glycol-Based Liquid Embolic Agent,in the Embolization of Malignant and Benign Hypervascular Tumors

PurposeTo investigate the safety and efficacy of an aqueous polyethylene glycol-based liquid embolic agent, Embrace Hydrogel Embolic System (HES), in the treatment of benign and malignant hypervascular tumors.Materials and MethodsA prospective, single-arm, multicenter study included 8 patients, 5 males and 3 females, with a median age of 58.5 years (30–85 years), who underwent embolization in 8 tumors between October 2019 and May 2020. Technical success was defined as successful delivery of HES to the index vessel, with disappearance of >90% of the targeted vascular enhancement or, for portal vein embolization, occlusion of the portal branches to the liver segments for future resection. The volume of HES administered, ease of use (5 point Likert scale), administration time, and adverse events (AEs) were recorded. Evaluation was performed at 7, 30, and 90 days via clinical assessment and blood testing, and follow-up imaging was performed at 30 days.ResultsEight patients were enrolled, and 10 embolizations were performed in 8 lesions. Tumors included hepatocellular carcinoma (n = 4), renal angiomyolipoma (n = 3), and intrahepatic cholangiocarcinoma (n = 1). Technical success was 100%, and the average ease of use was 3.3 ± 1.0 SD. The HES delivery time was 1–28 minutes (median, 16.5 minutes), and the HES volume injected was 0.4–4.0 mL (median, 1.3 mL). All patients reached 30-day follow-up with imaging, and 6 patients reached 90-day follow-up. There were 3 serious AEs in 2 patients that were unrelated to the embolic agent.ConclusionHES resulted in a 100% embolization technical success rate. The product ease of use was acceptable, and no target vessel recanalization was noted on follow-up imaging at 30 days.     

Survivorship Comparisons of Ultracongruent,Cruciate-Retaining and Posterior-Stabilized Tibial Inserts Using a Single Knee System Design: Results From the Australian Orthopedic Association National Joint Replacement Registry

BackgroundUltracongruent (UC) tibial inserts can increase knee replacement stability, but how survivorship compares to cruciate retaining (CR) or posterior stabilized (PS) inserts is unclear.MethodsData from a large joint registry were used to calculate the cumulative percent revision of a single popular knee design used with different inserts. There were 67,523 procedures, of which 12,434 were UC, 21,635 CR, and 33,454 PS. Revision rates and reasons for revision were analyzed.ResultsThe cumulative percent revision at 18 years was 8.3% for UC, 9.2% for CR, and 8.9% for PS. There was no difference when UC was compared to CR, but PS had a higher risk of revision. Revision reasons were similar.ConclusionCompared to the CR, an UC insert did not increase revision rates and was actually lower than a PS insert. An UC insert does not compromise long-term total knee arthroplasty survivorship in the Genesis II prosthesis.     

Understanding the Influence of Nanocarrier-Mediated Brain Delivery on Therapeutic Performance Through Pharmacokinetic-Pharmacodynamic Modeling

This study aimed at evaluating how encapsulation in a regular nanocarrier (NC) (providing extended circulation time) or in a brain-targeting NC (providing prolonged circulation time and increased brain uptake) may influence the therapeutic index compared with the unformulated drug and to explore the key parameters affecting therapeutic performance using a model-based approach. Pharmacokinetic (PK) models were built with chosen PK parameters. For a scenario where central effect depends on area under the unbound brain concentration curve and peripheral toxicity relates to peak unbound plasma concentration, dose-effect and drug-side effect curves were constructed, and the therapeutic index was evaluated. Regular NC improved the therapeutic index compared with the unformulated drug due to reduced peripheral toxicity, while brain-targeting NC enhanced the therapeutic index by lowering peripheral toxicity and increasing central effect. Decreasing drug release rate or systemic clearance of NC with drug still encapsulated could increase the therapeutic index. Also, a drug with shorter half-life would therapeutically benefit more from a NC encapsulation. This work provides insights into how a NC for brain delivery should be optimized to maximize the therapeutic performance and is helpful to predict if and to what extent a drug with certain PK properties would obtain therapeutic benefit from nanoencapsulation.     

Vertical interpositional augmentation genioplasty with porous polyethylene

Recent advances in the field of biomatrix porous implant technology has stirred the interest of the oral and maxillofacial surgical community. One such material (Medpor), is a biocompatible, large-pore, high-density polyethylene implant which has proven both experimentally and clinically to fulfil the criterion for maxillofacial reconstructive and aesthetic surgical grafting.     

Cosolvency of Dimethyl Isosorbide for Steroid Solubility

Dimethyl isosorbide (DMI), which is currently under investigation for its potential use as a pharmaceutical vehicle and drug permeation enhancer, is a water-miscible liquid with relatively low viscosity. The solubilization behavior of DMI as a cosolvent for nonpolar drugs was characterized via dielectric constant measurements of binary solvent systems containing DMI and either water, propylene glycol (PG), or polyethylene glycol (PEG). Evidence from the dielectric constant profiles and NMR studies suggest that DMI undergoes complexation with water and PG, but not with PEG, through hydrogen bonding interactions. The solvent complexation exhibited a major effect on the solubilities of prednisone, dexamethasone, and prednisolone in the mixed solvent systems. Maximum solubility of each drug was found to occur near a DMI/water or DMI/PG concentration ratio of 1:2. In the DMI–PEG mixed system, while there is no apparent interaction between DMI and PEG molecules, the solubility of prednisone was found to increase with decreasing dielectric constant.     

软骨细胞诱导骨髓基质干细胞构建带内支撑的组织工程化软骨

目的 探讨以聚羟基乙酸(PGA)包裹特定形态的医用假体材料--多孔高密度聚乙烯(HDPE,商品名为MEDPOR)为支架,应用软骨细胞诱导骨髓基质干细胞(BMSCs),共培养构建特定形态的带内支撑组织工程化软骨医用假体的可能性.方法 以直径3 mm、长5 mm的圆柱形HDPE,外裹 1 mm厚PGA为支架,将体外分别培养的新生猪BMSCs和耳郭软骨细胞按7∶3混合,以10×10 7/ml细胞浓度接种于支架上,同时以相同浓度的单纯软骨细胞和单纯BMSCs分别接种,作为阳性对照组(PC组)和阴性对照组(NC组).经体外培养2周及在裸鼠皮下移植4、8周后取材 ,行大体观察、组织学、组织化学及免疫组化检测.结果 各组细胞均与材料黏附良好.实验组和阳性对照组均形成了大体形态良好的HDPE-软骨复合体,内支撑的HDPE与外层软骨结合紧密.组织学可见成熟的软骨陷窝结构,软骨渗入HDPE孔隙内部、异染基质及Ⅱ型胶原呈强阳性表达.结论 以HDPE为内支撑,外裹PGA的支架,接种混合细胞,可于皮下构建特定形态、组织学良好的HDPE-软骨复合体.     

硫酸铁铵催化合成乙酰乙酸乙酯乙二醇缩酮

采用正交试验优选出最佳条件为：当乙酰乙酸乙酯为0.2moL时，硫酸铁铵0.7g，环乙烷10mL。乙酰乙酸乙酯和惭二醇摩尔比为1：1.5，反应时间为5h。所得产率为59.2%。     

N—酰化壳聚糖膜性能的研究

讨论了一系列N-酰化壳聚糖膜的抗张强度、透水性、VB_(12)的透过性、透氧性以及血液相容性。N-已酰化壳聚糖膜具有良好的血液相容性。在制膜过程中,加入分子量为1500的聚乙二醇为致孔剂,则可使N-己酰化壳聚糖膜的渗透性有较大提高。同时保持较好的血液相容性和强度。     

Pathophysiology of idiopathic dystonia: findings from genetic animal models

Dystonia is a common movement disorder which is thought to represent a disease of the basal ganglia. However, the pathogenesis of the idiopathic dystonias, i.e. the neuroanatomic and neurochemical basis, is still a mystery. Research in dystonia is complicated by the existence of various phenotypic and genotypic subtypes of idiopathic dystonia, probably related to heterogeneous dysfunctions.In neurological diseases in which no obvious neuronal degeneration can be found, such as in idiopathic dystonia, the identification of a primary defect is difficult, because of the large number of chemically distinct, but functionally interrelated, neurotransmitter systems in the brain.The variable response to pharmacological agents in patients with idiopathic dystonia supports the notion that the underlying biochemical dysfunctions vary in the subtypes of idiopathic dystonia. Hence, in basic research it is important to clearly define the involved type of dystonia.Animal models of dystonias were described as limited. However, over the last years, there has been considerable progress in the evaluation of animal models for different types of dystonia.Apart from animal models of symptomatic dystonia, genetic animal models with inherited dystonia which occurs in the absence of pathomorphological alterations in brain and spinal cord are described.This review will focus mainly on genetic animal models of different idiopathic dystonias and pathophysiological findings. In particular, in the case of the mutant dystonic (dt) rat, a model of generalized dystonia, and in the case of the genetically dystonic hamster (dt^sz), a model of paroxysmal dystonic choreoathetosis has been used, as these show great promise in contributing to the identification of underlying mechanisms in idiopathic dystonias, although even a proper animal model will probably never be equivalent to a human disease.Several pathophysiological findings from animal models are in line with clinical observations in dystonic patients, indicating abnormalities not only in the basal ganglia and thalamic nuclei, but also in the cerebellum and brainstem. Through clinical studies and neurochemical data several similarities were found in the genetic animal models, although the current data indicates different defects in dystonic animals which is consistent with the notion that dystonia is a heterogenous disorder.Different supraspinal dysfunctions appear to lead to manifestation of dystonic movements and postures. In addition to increasing our understanding of the pathophysiology of idiopathic dystonia, animal models may help to improve therapeutic strategies for this movement disorder.     

橡胶木粉填充LLDPE复合材料的结构和力学性能

用橡胶木粉填充线性低密度聚乙烯(LLDPE)，研究了酸、碱溶液预处理木粉的效果和硅烷偶联荆(KH-570)、MMA接枝的天然橡胶胶乳(MGL-30)两种改性剂对橡胶木粉表面改性的效果，以及未粉粒径和填充量等对木粉／LLDPE复合材料力学性能的影响，并用SEM对复合材料拉伸断面的形态结构进行了分析。结果表明：木粉的拉径、木粉填充量和改性荆用量对复合材料的力学性能有较大的影响，经碱溶液预处理再用改性荆改性后的木粉能有效地改善木粉与LLDPE的界面粘结强度，提高橡胶木粉／LLDPE复合材料的力学性能。