甲基酚烯酸酯树脂的热裂解机理

研究了以甲基丙烯酸酯端基不饱和取酯树脂为主链,用甲基丙烯酸甲酯取代苯乙烯作为交联剂制成的甲基丙烯酸酯树脂（ＭＡＥＲ）与通用型不饱和聚酯树脂（ＧＵＰＲ）的热裂解机理、燃烧现象。结果表明：ＭＡＥＲ的裂角产物中苯环化合物含量（１４．９％）少于ＧＵＰＲ（７４．５％）。ＭＡＥＲ燃烧时的发烟量和毒性也远低于ＧＵＰＲ。在ＭＡＥＲ中加入三水合氧化铝（ＡＴＨ）后,裂解产物中有毒物质的各类和数量更少,在燃烧时只有少量     

电化法研究壳聚糖树脂与游离酸的相互作用

利用电化学实验技术跟踪交联壳聚糖树脂吸附低浓度游离酸的行为,讨论了不同盐酸浓度和不同甲醇浓度两种因素对吸附的影响,并利用固液相互作用方程,求取吸附剂－吸附质相互作用能。实验结果表明,交联壳聚糖树脂吸附低浓度游离酸的过程是遵循单分子 机制进行的。     

曲马多药树脂速释混悬剂的研制

为掩盖盐酸曲马多的苦味 ,并达到迅速镇痛的目的 ,利用盐酸曲马多与离子交换树脂结合制成药物树脂的制备方法 ,进行了曲马多药树脂速释混悬剂的研制实验。实验结果表明 ,该制备方法简单 ,研制出的曲马多药树脂速释混悬剂稳定、口味好、释放迅速     

Effect of toothbrushing on fluoride release of polyacid-modified composite resins

The aim of the study was to evaluate the fluoride release of polyacid-modified composite resins (Dyract, Compoglass) submitted to brushing abrasion. Twenty samples were taken from each material and stored in a buffer solution (pH 4.0) for 12 days. Each day, the samples were transferred to a fresh solution. Ten samples of each material were brushed in an automatic tooth-brushing machine (250 strokes, 260-g load) every fourth day. The remaining samples were not subjected to brushing. Fluoride content of the solutions was measured with a fluoride sensitive electrode after the addition of TISAB. Statistical analysis demonstrated significant differences between the two materials with regard to cumulative fluoride release within the 12 days of the experiment. However, no difference was observed between the fluoride release of the brushed samples compared to the unbrushed specimens. This was true for both, the cumulative fluoride release and its release on the day following brushing. It is assumed that regular brushing of the tested materials did not influence their release of fluoride and that brushing of polyacid-modified composite resins does not lead to maintaining their initially high level of fluoride release. Received: 6 May 1999 / Accepted: 21 July 1999     

膨胀单体对环氧树脂的改性研究

介绍膨胀单体和膨胀聚合反应,综述膨胀单体对环氧树脂基复合材料,环氧树脂结合剂的改性研究及其进展,并提出今后的发展方向。     

大孔树脂吸附与超滤联用对六味地黄丸中丹皮酚和马钱素含量的影响

目的：考察大孔树脂吸附与超滤技术联用精制技术对六味地黄丸有关成分的影响。方法：采用ＨＰＬＣ法。结果：精制的提取物重量只有原药材的４．６％,而９８％的丹皮酚与８６％的马钱素被保留。结论：该联用精制技术可有效地减少服用量,保留小分子有效成分     

卡托普利控释微丸的研制

目的：制备卡托普利控释微丸，并对其释药情况进行研究。方法：在流化床内，用丙烯酸树脂RL30D和丙烯酸树脂RS30D的混合物作为包衣材料制备卡托普利控释微丸，对包衣材料配比及包衣材料用量进行选择，对微丸体外释药方程进行研究，采用加速试验法考察微丸释药稳定性。结果：包衣材料最佳配比丙烯酸树脂RL30D-丙烯酸树脂RS30D为1：5，包衣材料最佳用量为包衣增重20％，微丸的体外释药方程为Q＝0．09614t-0．008379(r＝0．9980)，释药稳定性好。结论：卡托普利控释微丸具有良好的零级释药特征。     

比色法测定消癌平注射液中总酚酸的含量

目的　建立消癌平注射液中总酚酸的含量测定方法。方法　以绿原酸为对照品 ,比色法测定。结果　绿原酸回归方程为A =35 8.1 4×C - 5 .3879(r=0 .9993,n =9)。在 2 0 .5～ 32 8μg范围内呈线性关系 ,平均回收率为 1 0 0 .4 8% ,RSD =1 .70 %。结论　所用方法简便、准确、快速 ,可作为该制剂的定量方法     

大孔吸附树脂富集茵陈蒿汤中蒿属香豆素的工艺研究

目的 研究大孔吸附树脂富集茵陈蒿汤中蒿属香豆素的工艺条件及参数。方法 以蒿属香豆素为指标，考察大孔吸附树脂富集茵陈蒿汤中蒿属香豆素的最佳工艺条件。结果提取液上大孔吸附树脂柱，吸附30min后，以5倍树脂量的蒸馏水洗去杂质，再以3～4倍树脂量的70％乙醇洗脱蒿属香豆素为最佳工艺。结论 此法可较好地富集茵陈蒿汤中的主要有效成分蒿属香豆素。     

黄芪皂苷纯化工艺研究

目的：研究黄芪皂苷类成分的纯化方法。方法：应用色谱指纹谱技术，研究比较正丁醇萃取法、大孔吸附树脂法纯化黄芪总皂苷。结果：AB-8树脂吸附纯化与正丁醇萃取纯化的黄芪总皂苷得率相近，但指纹图谱有一定差别，而其它型号的树脂吸附纯化的总皂苷得率偏低。结论：纯化黄芪总皂苷，AB-8树脂优于其它型号树脂。