醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响

目的　探究醛糖还原酶和晚期糖基化终末产物受体对糖尿病视网膜病变神经元凋亡的影响。方法　Wistar大鼠36只，随机分为对照组、模型组、转染组，后两组建立糖尿病大鼠模型。模型建立成功后，构建含有晚期糖基化终末产物受体siRNA的质粒并利用慢病毒转染入转染组大鼠体内。造模后4周、8周、12周，记录各组大鼠体质量及空腹血糖。造模后9周，禁食6 h，测定口服葡萄糖耐量。造模后12周，处死全部大鼠后，TUNEL法检测各组大鼠视网膜神经元凋亡情况，荧光分光光度计测定醛糖还原酶活性，Western blotting法测定晚期糖基化终末产物受体的表达，RT-PCR检测视网膜中Bcl-2和Bax mRNA相对表达量。结果　造模后4周、8周、12周，转染组和模型组的大鼠体质量均低于对照组（均为P<0.05）；造模后12周，转染组大鼠体质量高于模型组（P<0.05）。造模后4周、8周、12周，各组内大鼠空腹血糖水平均无明显变化（均为P>0.05），转染组和模型组大鼠的空腹血糖水平均高于对照组（均为P<0.05）。模型组和转染组大鼠在口服葡萄糖后30 min时，血糖水平均高于对照组（均为P<0.05）；在120 min时分别下降至最低，但仍高于对照组（均为P<0.05）。模型组和转染组的视网膜神经元凋亡指数、醛糖还原酶活性、晚期糖基化终末产物受体和Bax mRNA相对表达量均高于对照组（均为P<0.05），且转染组均高于模型组（均为P<0.05）。模型组和转染组的Bcl-2 mRNA相对表达量均低于对照组（均为P<0.05），转染组低于模型组（P<0.05）。结论　晚期糖基化终末产物结合受体后产生大量的氧自由基损伤，可能是导致糖尿病视网膜神经元凋亡，进而导致糖尿病视网膜病变发生的机制之一。     

乳腺密度对浸润性小叶癌术前MRI评估的影响

目的:探讨MRI在浸润性小叶癌(ILC)术前诊断中的应用价值，并评估乳腺密度对其影响。方法:选取75例术前30天内行MRI检查的I-Ⅲ期ILC患者列入本项研究，根据腺体含量评估乳腺密度，在MRI下测量肿瘤大小，并对比其与病理大小的一致性。结果:75例入组患者中26例（34.7%）患者经MRI评估发现新的可疑病灶，20例（26.7%）患者改变了手术方式。高密度乳腺型患者额外病灶检出率明显高于低密度乳腺型患者（51.6% vs 22.7%，P=0.010）。MRI评估肿瘤大小在低密度乳腺型患者中容易被低估（36.4% vs 12.9%，P=0.024），在高密度乳腺型患者中容易被高估（6.8% vs 29.0%，P=0.010），但两组患者与病理大小一致性的比例无明显差异。结论:ILC患者术前乳腺MRI检查能够提高额外恶性肿瘤的检出率，而乳腺密度是影响MRI评估的重要因素。     

A Broad Learning System with Ensemble and Classification Methods for Multi-step-ahead Wind Speed Prediction

Cognitive Computation - Short-term wind speed prediction plays a significant role in the management of large-scale wind power plants. However, wind speed prediction is extremely complex and...     

应用国产封堵器在治疗先天性心脏病的临床疗效分析

目的 总结国产封堵器经皮和经胸途径治疗先天性心脏病的临床疗效。方法 回顾性分析我院2013年1月至2017年12月在X线透视下或单纯超声心动图引导下采用经皮穿刺股静脉或股动静脉法，或者食管超声心动图监测下经胸小切口行先天性心脏病封堵1186例，其中经皮X线下封堵1081例、经皮单纯超声引导下封堵42例、经胸封堵63例；其中动脉导管未闭（ patent ductus arteriole，PDA）426例、房间隔缺损（atrial septal defect，ASD）363例、室间隔缺损（ventricular septal defect，VSD）348例、卵圆孔未闭11例、房间隔缺损合并室间隔缺损9例、房间隔缺损合并动脉导管未闭6例、房间隔缺损合并肺动脉瓣狭窄（pulmonary stenosis，PS）12例、动脉导管未闭合并肺动脉瓣狭窄8例、主肺动脉侧支封堵3例[经胸封堵66例改为63例，PDA443例改为426例]。结果 全组病例成功率98.2％（1165/1186），无死亡病例。随访1~36个月，术后第1、3、6、12个月及术后每年常规行超声心动图及心电图检查。术后第1、6、12个月的随访率分别为 92.9%（1102/1186）、84.1%（998/1186）、70.5%（836/1186）。超声心动图提示少量残余分流（<3 mm）18例；三尖瓣少量反流33例，中量反流5例；主动脉瓣轻度反流5例，中度反流1例；心律失常Ⅲ°房室传导阻滞（Avionics Bulletin，AVB[房室传导阻滞（Avionics Bulletin，AVB）]）1 例，Ⅱ°AVB 3例，完全性左束支3例，交界性心动过速3例，交界性逸搏2例。结论 国产封堵器在先天性心脏病封堵治疗中具有成功率高、创伤小、并发症低、操作容易、疗效确切、恢复快等特点，是治疗先天性心脏病的理想方法。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Myeloid-derived suppressor cell (MDSC) key genes analysis in rat anti-CD28-induced immune tolerance kidney transplantation

BackgroundIn the field of transplantation, inducing immune tolerance in recipients is of great importance. Blocking co-stimulatory molecule using anti-CD28 antibody could induce tolerance in a rat kidney transplantation model. Myeloid-derived suppressor cells (MDSCs) reveals strong immune suppressive abilities in kidney transplantation. Here we analyzed key genes of MDSCs leading to transplant tolerance in this model.MethodsMicroarray data of rat gene expression profiles under accession number {"type":"entrez-geo","attrs":{"text":"GSE28545","term_id":"28545"}}GSE28545 in the Gene Expression Omnibus (GEO) database were analyzed. Running the LIMMA package in R language, the differentially expressed genes (DEGs) were found. Enrichment analysis of the DEGs was conducted in the Database for Annotation, Visualization and Integrated Discovery (DAVID) database to explore gene ontology (GO) annotation and their Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. Their protein-protein interactions (PPIs) were provided by STRING database and was visualized in Cytoscape. Hub genes were carried out by CytoHubba.ResultsThree hundred and thirty-eight DEGs were exported, including 27 upregulated and 311 downregulated genes. The functions and KEGG pathways of the DEGs were assessed and the PPI network was constructed based on the string interactions of the DEGs. The network was visualized in Cytoscape; the entire PPI network consisted of 192 nodes and 469 edges. Zap70, Cdc42, Stat1, Stat4, Ccl5 and Cxcr3 were among the hub genes.ConclusionsThese key genes, corresponding proteins and their functions may provide valuable background for both basic and clinical research and could be the direction of future studies in immune tolerance, especially those examining immunocyte-induced tolerance.     

直线吻合器在全喉切除术中的应用

目的探讨一次性直线型吻合器在喉癌手术中的应用效果。方法选取我科2019年10例全喉切除手术患者,采用随机分组方法,分为封闭法和半封闭法两组。总结比较所用手术时间、术中出血量、术后咽瘘感染的发生率。结果所有手术都顺利完成,会厌软骨残留1例,咽瘘1例。结论直线吻合器在全喉切除术中具有较好的临床应用价值。     

Antidiabetic activity of Helicteres angustifolia root

Context The root of Helicteres angustifolia L. (Sterculiaceae) has been used as folk herbal drug to treat cancer, bacterial infections, inflammatory, and flu in China. However, there is no report on its antidiabetic activity.

Objective This study evaluates the antidiabetic activity of ethanol extract from H. angustifolia root.

Materials and methods The promoting effect of H. angustifolia root ethanol extract (25, 50, and 100 μg/mL) on glucose uptake was evaluated using HepG2 cell, differentiated C2C12 myotubes, and differentiated 3T3-L1 adipocytes. The antidiabetic activity of the extract was assessed in vivo using STZ-induced diabetic rats by orally administration of the extract (200 and 400?mg/kg b.w.) once per day for 28 d. Blood glucose, TG, TC, TP, HDL-C, UA, BUN, AST, ALT, insulin, and HOMA-IR were analyzed.

Results The results showed that the extract increased glucose uptake in C2C12 myotubes and 3T3-L1 adipocytes with an IC₅₀ value of 79.95 and 135.96 μg/mL, respectively. And about 12%, 19%, and 10% (p < 0.05) in HepG2 cells when compared with the control at the concentration of 25, 50, and 100 μg/mL, respectively. After 28 days’ treatment with the extract, significant reduction was observed in blood glucose, HOMA-IR, TC, TG, UA, BUN, AST, and ALT levels, while the levels of TP and HDL cholesterol increased.

Discussion and conclusion These results suggest that H. angustifolia root ethanol extract possess potent antidiabetic activity, which is the first report on antidiabetic activity of this plant.