A Pilot First-in-Human Study of Embrace,a Polyethylene Glycol-Based Liquid Embolic Agent,in the Embolization of Malignant and Benign Hypervascular Tumors

PurposeTo investigate the safety and efficacy of an aqueous polyethylene glycol-based liquid embolic agent, Embrace Hydrogel Embolic System (HES), in the treatment of benign and malignant hypervascular tumors.Materials and MethodsA prospective, single-arm, multicenter study included 8 patients, 5 males and 3 females, with a median age of 58.5 years (30–85 years), who underwent embolization in 8 tumors between October 2019 and May 2020. Technical success was defined as successful delivery of HES to the index vessel, with disappearance of >90% of the targeted vascular enhancement or, for portal vein embolization, occlusion of the portal branches to the liver segments for future resection. The volume of HES administered, ease of use (5 point Likert scale), administration time, and adverse events (AEs) were recorded. Evaluation was performed at 7, 30, and 90 days via clinical assessment and blood testing, and follow-up imaging was performed at 30 days.ResultsEight patients were enrolled, and 10 embolizations were performed in 8 lesions. Tumors included hepatocellular carcinoma (n = 4), renal angiomyolipoma (n = 3), and intrahepatic cholangiocarcinoma (n = 1). Technical success was 100%, and the average ease of use was 3.3 ± 1.0 SD. The HES delivery time was 1–28 minutes (median, 16.5 minutes), and the HES volume injected was 0.4–4.0 mL (median, 1.3 mL). All patients reached 30-day follow-up with imaging, and 6 patients reached 90-day follow-up. There were 3 serious AEs in 2 patients that were unrelated to the embolic agent.ConclusionHES resulted in a 100% embolization technical success rate. The product ease of use was acceptable, and no target vessel recanalization was noted on follow-up imaging at 30 days.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.     

Understanding the Influence of Nanocarrier-Mediated Brain Delivery on Therapeutic Performance Through Pharmacokinetic-Pharmacodynamic Modeling

This study aimed at evaluating how encapsulation in a regular nanocarrier (NC) (providing extended circulation time) or in a brain-targeting NC (providing prolonged circulation time and increased brain uptake) may influence the therapeutic index compared with the unformulated drug and to explore the key parameters affecting therapeutic performance using a model-based approach. Pharmacokinetic (PK) models were built with chosen PK parameters. For a scenario where central effect depends on area under the unbound brain concentration curve and peripheral toxicity relates to peak unbound plasma concentration, dose-effect and drug-side effect curves were constructed, and the therapeutic index was evaluated. Regular NC improved the therapeutic index compared with the unformulated drug due to reduced peripheral toxicity, while brain-targeting NC enhanced the therapeutic index by lowering peripheral toxicity and increasing central effect. Decreasing drug release rate or systemic clearance of NC with drug still encapsulated could increase the therapeutic index. Also, a drug with shorter half-life would therapeutically benefit more from a NC encapsulation. This work provides insights into how a NC for brain delivery should be optimized to maximize the therapeutic performance and is helpful to predict if and to what extent a drug with certain PK properties would obtain therapeutic benefit from nanoencapsulation.     

Cosolvency of Dimethyl Isosorbide for Steroid Solubility

Dimethyl isosorbide (DMI), which is currently under investigation for its potential use as a pharmaceutical vehicle and drug permeation enhancer, is a water-miscible liquid with relatively low viscosity. The solubilization behavior of DMI as a cosolvent for nonpolar drugs was characterized via dielectric constant measurements of binary solvent systems containing DMI and either water, propylene glycol (PG), or polyethylene glycol (PEG). Evidence from the dielectric constant profiles and NMR studies suggest that DMI undergoes complexation with water and PG, but not with PEG, through hydrogen bonding interactions. The solvent complexation exhibited a major effect on the solubilities of prednisone, dexamethasone, and prednisolone in the mixed solvent systems. Maximum solubility of each drug was found to occur near a DMI/water or DMI/PG concentration ratio of 1:2. In the DMI–PEG mixed system, while there is no apparent interaction between DMI and PEG molecules, the solubility of prednisone was found to increase with decreasing dielectric constant.     

无国界医生在救援中备灾的重要性

无国界医生致力于应对天灾和战祸所引起的人道医疗危机。灾后实时爆发的人道医疗危机包括急性的外科创伤问题和基础医疗系统的破坏导致疫症发生。本文介绍了无国界医生的救援经验以及专业的备灾体系。     

左旋布比卡因复合舒芬太尼或芬太尼在分娩硬膜外自控镇痛的应用

目的探讨左旋布比卡因复合舒芬太尼硬膜外自控镇痛（PCEA）用于分娩镇痛的临床效果及安全性。方法随机选择120例美国标准协会（ASA）I-Ⅱ级初产妇，随机分为舒芬太尼组（A组）、芬太尼组（B组）、无镇痛组（C组），每组40例。A组和B组采用PCEA，C组不给予镇痛药物。观察各组不同时段视觉模拟评分（VAS）和不良反应的发生，同时记录3组产程时间、分娩方式、缩宫使用情况、产后出血量、新生儿Apgar评分。结果A、B2组和C组在PCEA20、60min及宫口开全时VAS差异有统计学意义（P〈0.05）；PCEA5min，A、B2组VAS差异有统计学意义（P〈0.05），2组Bromage评分、不良反应差异无统计学意义（P〉0.05）。3组产程时间、分娩方式、产后出血量、新生儿Apgar评分比较差异均无统计学意义（P〉0.05）。结论左旋布比卡因复合舒芬太尼或芬太尼用于分娩镇痛安全有效，对母婴无明显不良影响。     

硫酸铁铵催化合成乙酰乙酸乙酯乙二醇缩酮

采用正交试验优选出最佳条件为：当乙酰乙酸乙酯为0.2moL时，硫酸铁铵0.7g，环乙烷10mL。乙酰乙酸乙酯和惭二醇摩尔比为1：1.5，反应时间为5h。所得产率为59.2%。     

MicroRNAs及其在泌尿系肿瘤的研究进展

microRNAs（miRNAs）是一类分布十分广泛的内源性非编码RNA,在动物、植物、病毒中广泛存在。miRNAs与肿瘤的发生发展预后有关,并在肿瘤的增殖、分化及调亡等方面有重要的作用。结合最近相关文献,本文就miRNAs与泌尿系肿瘤方面的进展作简要概述。     

Particle size and morphology of UHMWPE wear debris in failed total knee arthroplasties--a comparison between mobile bearing and fixed bearing knees.

Osteolysis induced by ultrahigh molecular weight polyethylene wear debris has been recognized as the major cause of long-term failure in total joint arthroplasties. In a previous study, the prevalence of intraoperatively identified osteolysis during primary revision surgery was much higher in mobile bearing knee replacements (47%) than in fixed bearing knee replacements (13%). We postulated that mobile bearing knee implants tend to produce smaller sized particles. In our current study, we compared the particle size and morphology of polyethylene wear debris between failed mobile bearing and fixed bearing knees. Tissue specimens from interfacial and lytic regions were extracted during revision surgery of 10 mobile bearing knees (all of the low contact stress (LCS) design) and 17 fixed bearing knees (10 of the porous-coated anatomic (PCA) and 7 of the Miller/Galante design). Polyethylene particles were isolated from the tissue specimens and examined using both scanning electron microscopy and light-scattering analyses. The LCS mobile bearing knees produced smaller particulate debris (mean equivalent spherical diameter: 0.58 microm in LCS, 1.17 microm in PCA and 5.23 microm in M/G) and more granular debris (mean value: 93% in LCS, 77% in PCA and 15% in M/G).     

N—酰化壳聚糖膜性能的研究

讨论了一系列N-酰化壳聚糖膜的抗张强度、透水性、VB_(12)的透过性、透氧性以及血液相容性。N-已酰化壳聚糖膜具有良好的血液相容性。在制膜过程中,加入分子量为1500的聚乙二醇为致孔剂,则可使N-己酰化壳聚糖膜的渗透性有较大提高。同时保持较好的血液相容性和强度。