An Investigation of the Mineral in Ductile and Brittle Cortical Mouse Bone

Bone is a strong and tough material composed of apatite mineral, organic matter, and water. Changes in composition and organization of these building blocks affect bone's mechanical integrity. Skeletal disorders often affect bone's mineral phase, either by variations in the collagen or directly altering mineralization. The aim of the current study was to explore the differences in the mineral of brittle and ductile cortical bone at the mineral (nm) and tissue (µm) levels using two mouse phenotypes. Osteogenesis imperfecta model, oim^‐/‐, mice have a defect in the collagen, which leads to brittle bone; PHOSPHO1 mutants, Phospho1^‐/‐, have ductile bone resulting from altered mineralization. Oim^‐/‐ and Phospho1^‐/‐ were compared with their respective wild‐type controls. Femora were defatted and ground to powder to measure average mineral crystal size using X‐ray diffraction (XRD) and to monitor the bulk mineral to matrix ratio via thermogravimetric analysis (TGA). XRD scans were run after TGA for phase identification to assess the fractions of hydroxyapatite and β‐tricalcium phosphate. Tibiae were embedded to measure elastic properties with nanoindentation and the extent of mineralization with backscattered electron microscopy (BSE SEM). Results revealed that although both pathology models had extremely different whole‐bone mechanics, they both had smaller apatite crystals, lower bulk mineral to matrix ratio, and showed more thermal conversion to β‐tricalcium phosphate than their wild types, indicating deviations from stoichiometric hydroxyapatite in the original mineral. In contrast, the degree of mineralization of bone matrix was different for each strain: brittle oim^‐/‐ were hypermineralized, whereas ductile Phospho1^‐/‐ were hypomineralized. Despite differences in the mineralization, nanoscale alterations in the mineral were associated with reduced tissue elastic moduli in both pathologies. Results indicated that alterations from normal crystal size, composition, and structure are correlated with reduced mechanical integrity of bone. © 2014 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.     

Decreased Mechanical Strength and Collagen Content in SPARC‐Null Periodontal Ligament Is Reversed by Inhibition of Transglutaminase Activity

The periodontal ligament (PDL) is a critical tissue that provides a physical link between the mineralized outer layer of the tooth and the alveolar bone. The PDL is composed primarily of nonmineralized fibrillar collagens. Expression of secreted protein acidic and rich in cysteine (SPARC/osteonectin), a collagen‐binding matricellular protein, has been shown to be essential for collagen homeostasis in PDL. In the absence of SPARC, PDL collagen fibers are smaller and less dense than fibers that constitute WT PDL. The aim of this study was to identify cellular mechanisms by which SPARC affected collagen fiber assembly and morphology in PDL. Cross‐linking of fibrillar collagens is one parameter that is known to affect insoluble collagen incorporation and fiber morphology. Herein, the reduction in collagen fiber size and quantity in the absence of SPARC expression was shown to result in a PDL with reduced molar extraction force in comparison to that of WT mice (C57Bl/6J). Furthermore, an increase in transglutaminase activity was found in SPARC‐null PDL by biochemical analyses that was supported by immunohistochemical results. Specifically, collagen I was identified as a substrate for transglutaminase in PDL and transglutaminase activity on collagen I was found to be greater in SPARC‐null tissues in comparison to WT. Strikingly, inhibition of transglutaminase activity in SPARC‐null PDL resulted in increases in both collagen fiber thickness and in collagen content, whereas transglutaminase inhibitors injected into WT mice resulted in increases in collagen fiber thickness only. Furthermore, PDL treated with transglutaminase inhibitors exhibited increases in molar extraction force in WT and in SPARC‐null mice. Thus, SPARC is proposed to act as a critical regulator of transglutaminase activity on collagen I with implications for mechanical strength of tissues. © 2015 American Society for Bone and Mineral Research     

Adsorption of matrix metalloproteinases onto biomedical polymers: a new aspect in biological acceptance

Matrix metalloproteinases (MMPs) are zinc-dependent enzymes involved in the remodelling of connective tissues during the development and wound healing. Moreover, two MMPs, Gelatinase A (MMP-2) and Gelatinase B (MMP-9), are also present in body fluids such as blood and urine and, therefore, they can be in contact with implanted biomaterials and can be adsorbed onto their surface. In order to test this hypothesis disks of different polymers (polystyrene (PS), polyvinyl chloride (PVC), poly(D,L-lactide) (PLA), polymethyl methacrylate (PMMA) and poly(2-hydroxyethyl methacrylate) (PHEMA)) have been exposed to human plasma and adsorbed proteins have been eluted and analyzed. Using Western blot and substrate zymography analysis, we observed that both MMP-2 and MMP-9 adsorbed onto the surfaces of all the polymers, especially hydrophilic ones (PMMA and PHEMA) and PLA, in both the active and inactive forms. Furthermore, we observed that adhesion of human granulocyte neutophils to PMMA, the polymer that adsorbed the higher quantity of MMP-2 and MMP-9 compared to the others, was reduced by more that 50% by the presence of a gelatinase inhibitor. This data suggest a surprising role of these absorbed enzymes in the adhesion of neutrophil onto some polymeric biomaterials surface and, therefore, in the setting of inflammation.     

Preliminary Investigation of Airgap Electrospun Silk-Fibroin-Based Structures for Ligament Analogue Engineering

The process of electrospinning has proven to be highly beneficial for use in a number of tissue-engineering applications due to its ease of use, flexibility and tailorable properties. There have been many publications on the creation of aligned fibrous structures created through various forms of electrospinning, most involving the use of a metal target rotating at high speeds. This work focuses on the use of a variation known as airgap electrospinning, which does not use a metal collecting target but rather a pair of grounded electrodes equidistant from the charged polymer solution to create highly aligned 3D structures. This study involved a preliminary investigation and comparison of traditionally and airgap electrospun silk-fibroin-based ligament constructs. Structures were characterized with SEM and alignment FFT, and underwent porosity, permeability, and mechanical anisotropy evaluation. Preliminary cell culture with human dermal fibroblasts was performed to determine the degree of cellular orientation and penetration. Results showed airgap electrospun structures to be anisotropic with significantly increased porosity and cellular penetration compared to their traditionally electrospun counterparts.     

The orally bioavailable met inhibitor PF‐2341066 inhibits osteosarcoma growth and osteolysis/matrix production in a xenograft model

Osteosarcoma (OS) is the most common primary bone tumor in children and adolescents. Ninety percent of patients who present with metastatic and 30% to 40% of patients with nonmetastatic disease experience relapse, creating an urgent need for novel therapeutic strategies. The Met receptor tyrosine kinase and its ligand, hepatocyte growth factor (HGF), are important for mitosis, motility, and cell survival. Upregulation of Met/HGF signaling via receptor overexpression, amplification, or mutation drives the proliferation, invasiveness, and metastasis of a variety of cancer cells, including OS, prompting the development of Met/HGF inhibitors. OS cells depend on Met overexpression because introduction of dominant‐negative Met inhibits in vivo tumorigenicity. Despite the importance of Met/HGF signaling in the development and maintenance of OS, the potential efficacy of pharmacologic Met inhibition in OS has been addressed only in in vitro studies. PF‐2341066 is an orally bioavailable, selective ATP‐competitive Met inhibitor that showed promising results recently in a phase I clinical trial in non–small cell lung cancer (NSCLC) patients. We tested the ability of PF‐2341066 to inhibit malignant properties of osteosarcoma cells in vitro and orthotopic xenograft growth in vivo. In vitro, PF‐2341066 inhibited osteosarcoma behavior associated with primary tumor growth (eg, proliferation and survival) as well as metastasis (eg, invasion and clonogenicity). In nude mice treated with PF‐2341066 via oral gavage, the growth and associated osteolysis and extracortical bone matrix formation of osteosarcoma xenografts were inhibited by PF‐2341066. PF‐2341066 may represent an effective new systemic therapy for localized and potentially disseminated osteosarcoma. © 2011 American Society for Bone and Mineral Research.     

Effects of Chitosan-Coated Fibers as a Scaffold for Three-Dimensional Cultures of Rabbit Fibroblasts for Ligament Tissue Engineering

Material selection in tissue-engineering scaffolds is one of the primary factors defining cellular response and matrix formation. In this study, we fabricated chitosan-coated poly(lactic acid) (PLA) fiber scaffolds to test our hypothesis that PLA fibers coated with chitosan highly promoted cell supporting properties compared to those without chitosan. Both PLA fibers (PLA group) and chitosan-coated PLA fibers (PLA–chitosan group) were fabricated for this study. Anterior cruciate ligament (ACL) fibroblasts were isolated from Japanese white rabbits and cultured on scaffolds consisting of each type of fiber. The effects of cell adhesivity, proliferation, and synthesis of the extracellular matrix (ECM) for each fiber were analyzed by cell counting, hydroxyproline assay, scanning electron microscopy and quantitative RT-PCR. Cell adhesivity, proliferation, hydroxyproline content and the expression of type-I collagen mRNA were significantly higher in the PLA–chitosan group than in the PLA group. Scanning electron microscopic observation showed that fibroblasts proliferated with a high level of ECM synthesis around the cells. Chitosan coating improved ACL fibroblast adhesion and proliferation, and had a positive effect on matrix production. Thus, the advantages of chitosan-coated PLA fibers show them to be a suitable biomaterial for ACL tissue-engineering scaffolds.     

Poly (N-isopropylacrylamide) (PNIPAM)-grafted gelatin as thermoresponsive three-dimensional artificial extracellular matrix: molecular and formulation parameters vs. cell proliferation potential

A series of poly(N-isopropylacrylamide)-grafted gelatins (PNIPAM gelatins) of three different graft densities (approx. 11, 22 and 34 graft chains per gelatin molecule) and three different molecular weights of their graft chains (molecular weight approximately 1.2 × 10⁴, 5.0 × 10⁴ and 1.3 × 10⁵ g/mol) were prepared by multiple derivatization of dithiocarbamyl (DC) group in a gelatin molecule and subsequent iniferter (acts as an initiator, transfer-agent and terminator)-based photopolymerization of NIPAM. The weight ratio of PNIPAM graft chains to gelatin (P/G) varied from 1.4 to 49. Aqueous solutions of PNIPAM-gelatins showed thermo-responsiveness, depended on the graft density and the molecular weight of PNIPAM graft chain or P/G. Aqueous solutions (10 or 20%, w/v) of PNIPAM-gelatins with P/G of more than 5.8 were converted to gels at 37°C. Focal plane images of PNIPAM-gelatin gels by confocal laser scanning microscopy revealed that the size of hydrophobically clustered aggregates increased with P/G, whereas the space of microvoids decreased with concentration. Compressive strain–stress measurements revealed that compressive strength of PNIPAM-gelatin increased with P/G. Bovine smooth muscle cells (SMCs)-entrapped gels were produced from PNIPAM-gelatin-containing cell-suspended medium solutions at 37°C. The entrapped cells proliferated in the gel with P/G of more than 12. A higher cell proliferativity was obtained at low concentration (5%, w/v) and higher P/G (> 18). Tissue formation composed of proliferative SMCs and cell-secreted extracellular matrices (collagen) was obtained at 14 days incubation. The inter-relationship between the molecular parameters of PNIPAM-gelatin, internal structural features and cell proliferation potential was discussed.     

Impact of Sex on Comparative Outcomes of Radial Versus Femoral Access in Patients With Acute Coronary Syndromes Undergoing Invasive Management: Data From the Randomized MATRIX-Access Trial

Objectives

This study sought to assess whether transradial access (TRA) compared with transfemoral access (TFA) is associated with consistent outcomes in male and female patients with acute coronary syndrome undergoing invasive management.