Epithelial tissue formation in matrix culture and in histophysiologic gradient culture

Summary Formation of epithelial tissues in culture so that they become facsimiles in their structure of such tissues in nature requires procedures that comply with several spatial imperatives: a) three-dimensional growth; b) histophysiologic conditions that provide, concurrently, gradients of maturation and of diffusion of metabolites; and c) growth as layers of cells without free edges. Many steps have been required in the evolution of these methods. Two systems are described here in sufficient detail to serve as a manual. Three-dimensional growth of masses of epithelial tissue is accomplished in matrix culture using Gelfoam sponge and collagen-coated cellulose sponge. Radial gradient culture, a recent development, provides conditions that comply with the requirements of histophysiologic gradients and of epithelial tissue growth in layers without interruption in their continuity.     

Zero-Order Release Formulation of Oxprenolol Hydrochloride with Swelling and Erosion Control

Zero-order release of oxprenolol hydrochloride was obtained by controlling the swelling and erosion of the matrix. This formulation involves only mixing of drug, hydroxypropylmethylcellulose (HPMC), and sodium carboxymethylcellulose (Na CMC) at the ratio of 1:0.4:1.6, respectively, and compressing the mixture directly into tablets. The in vitro release pattern from this optimized matrix tablet was reproducible. Accelerated stability studies revealed that the optimized formulation remains stable for an approximately 2-year shelf life. This sustained-release (SR) tablet was evaluated in dogs, and for comparison a conventional (CV) formulation was also given at the same dose level. Plasma oxprenolol levels were monitored by a sensitive and specific high-performance liquid chromatographic (HPLC) method. Significant differences in the pharmacokinetic parameters, i.e., lower C _max, higher values of t _max, MRT, AUC, and plasma concentration at 24 hr, and nearly constant plasma levels over 12 hr, indicated that the SR matrix tablet is superior to the CV rapid-releasing formulation. The in vitro release parameters and in vivo pharmacokinetics correlated well.     

复合膳食纤维对大鼠体内脂质过氧化作用的影响

制备复合膳食纤维 (dietaryfiber,DF) ,并分别探讨复合、混合及三种单一的DF对高脂血症大鼠体内脂质过氧化作用的影响。选健康、断乳Wistar大鼠 6 4只 ,按体重随机分为 8组 ,用高脂饲料诱发高脂血症的同时 ,分别添加 10 %的DF :纤维素 (B组 )、果胶 (C组 )、海藻酸钠 (D组 )、纤维素 -果胶复合物 (E组 )、纤维素 -海藻酸钠复合物 (F组 )、纤维素 -果胶混合物 (G组 )、纤维素 -海藻酸钠混合物 (H组 ) ,以单纯的高脂饲料组为对照组 (A组 ) ,观察各种DF对大鼠的生长发育及脂质过氧化作用的影响。结果显示 :1、添加 10 %的各种DF不影响大鼠的生长发育。 2、各种DF皆可显著升高血清超氧化物歧化酶 (SOD) (P <0 0 1)、谷胱甘肽过氧化物酶 (GSH Px)活性 (P <0 0 1) ,降低丙二醛 (MDA)水平 (P <0 0 5 ,B、D组除外 ) ,提高红细胞膜的流动性 (P <0 0 5 ) ,以复合物、混合物效果为明显。 3、各种DF可不同程度地增加粪重和粪脂排出量 (P <0 0 5 ,D组除外 ) ,以复合物、混合物为明显。提示各种DF皆可不同程度地降低大鼠体内脂质过氧化作用 ,提高红细胞膜的流动性 ,其中可溶性DF效果优于不可溶性DF ,而复合、混合DF的效果又优于单一的DF ,且以复合物效果为佳     

豆渣纤维的降脂作用及对血液流变学影响的研究

以ＳＤ大鼠为对象，研究了豆渣纤维对高胆固醇膳动物脂质代谢和血流变性的影响，并与果胶和纯纤维素进行比较，结果表明：８周实验后，豆渣与果胶组动物的血清总胆固醇（ＴＣ）和低密度脂蛋白胆固醇（ＬＤＬ－Ｃ）显著降低，但豆渣组的血脂水平比果胶组更低（Ｐ＜０．０５）。而纯纤维素组未显出降脂作用。各组大鼠的甘油三醋（ＴＧ）和高密度脂蛋白胆固醇（ＨＤＬ－Ｃ）也无明显变化。实验同时表明，６％的豆渣纤维与果胶均可使高脂大鼠的血粘度及血小板聚集率降低（Ｐ＜０．０５），且前者优于后者。相关分析显示，血脂与血流变学指标间存在显著相关性（Ｐ＜０．０５），其中ＴＣ与ＬＤＬ－Ｃ是影响血流变性的重要因素。６％的以上各种纤维摄入量均不影响大鼠的摄食量与生长。     

Isoelectric focusing on cellulose acetate membrane: a separation procedure for alkaline phosphatase isoenzymes

An isoelectric focusing technique for the separation of alkaline phosphatase isoenzymes on cellulose acetate membrane is described. Optimal conditions for isoelectric focusing were established by changing ampholine concentration and focusing conditions. Bone, liver, intestinal, and placental isoenzymes can be resolved into vacious sub-bands in a pH range of 4.1 to 5.2. These sub-bands were correlated with the findings of electrophoretic isoenzyme separation. The whole procedure proves very simple to perform and comparatively time saving (4 h). This procedure may help clarify the problems of ALP isoenzyme differention when electrophoretic patterns are unresolved.     

Interactions of γ-immunoglobulins with lipid mono- or bilayers and liposomes. Existence of two conformations of γ-immunoglobulins of different hydrophobicities

Interactions between rabbit-γ-immunoglobulins and model membranes (lipid monalayers, planar lipid bilayers, liposomes) have been investigated. No significant interaction was observed with immunoglobulins. However, immunoglobulins dialysed first vs aqueous buffer having pH 2 or 3 and then dialysed against pH 7 buffer presumably adopt a new conformation which allows their bindings to model membranes. This binding is hydrophobic and the immunoglobulin region interacting with the lipid acyl chains is probably located in the heavy chain, as suggested by labelling in this region by a photosensitive probe previously incorporated into the lipid hydrophobic core. Cleavage at the hinge region by papain or pepsin, or heating above 38°C, induces the loss of the hydrophobic conformation responsible for hydrophobic bindings. The binding capacity of immunoglobulins heated above 38°C is restored after momentary dialysis at pH 2. The possible existence of two Ig isomers is discussed in relation to the mechanism of γ-immunoglobulin passage through the endoplasmic membrane and fixation into the plasma membrane.     

Biodegradation studies on periodate oxidized cellulose

Sodium periodate oxidized cellulose was found to degrade into small molecules when implanted subcutaneously in rats. Thus the potentiality of using oxidized cellulose as a biodegradable drug carrier is envisaged.     

Injectable semi rigid penile prosthesis: study in rabbits and future perspectives

BackgroundPenile prostheses are the third option in the treatment of erectile dysfunction, however, despite their proven effectiveness, the occurrence of infections, advanced age of patients and comorbidities are the main limiting factors for this treatment modality. In the continuous search for biointegrated, clinically durable and minimally invasive treatment options, a possible model of penile prosthesis was sought through the use of intracavernous bacterial cellulose (BC) gel, in an experimental model of orchiectomized rabbits.MethodsThirty adult New Zealand rabbits were equally distributed into three groups: BC; vehicle and control. Each group was then subdivided according to the follow-up time of 3 and 6 months. Bilateral orchiectomy was performed 3 weeks before injection in the BC and vehicle groups. Pachymetry measurements of the penile axis, diameter and length were performed in situ. Histomorphometry analyzes of the corpora cavernosa (CC), thickness of the tunica albuginea, cell density, collagen and elastic fibers post-injection were also performed, in addition to immunohistochemistry for newly formed vessels.ResultsThe implant of BC increased both the length and thickness of the penis three and six months after the last injection, with a consequent increase in the diameter of the CC. On the other hand, the filling effect was not observed in the control and vehicle groups, confirming the degradation of this tissue after orchiectomy and the effectiveness of BC as a filling agent. Histomorphometry analyzes corroborate the mass effect of BC integrated into the tissue, permeated by predominantly lymphomononuclear inflammatory infiltrate, multinucleated giant foreign body cells, fibroblasts, elastic fibers and newly formed vessels, without degradation or loss of volume, even after six months of implantation.ConclusionsBiocompatibility and biointegration to the host tissue make BC a prosperous penile filling material, with local application and minimally invasive.     

5—氨基水杨酸与乙基纤维素溶混性的计算机模拟

使用计算机辅助分子建模（ＣＡＭＭ）、分子力学和蒙特卡罗方法,模拟了５－氨基水杨酸（５－ＡＳＡ,Ｃ７Ｈ７ＮＯ３,美沙拉灵（ｓｐ－５７－６））与乙基纤维素（ＥＣ）的溶混性。模拟结果显示,在２７３Ｋ至３１６Ｋ的温度范围内,５－氨基水杨酸与乙基纤维素能以任何比例混溶。得出Ｅｍｉｘ（Ｔ）＝Ａ＋ＢＴ＋Ｃ／Ｔ模型,Ａ＝０．３６９４Ｅ＋０４,Ｂ＝－０．２６１０Ｅ－０２,ａｎｄＣ＝０．１８１８Ｅ＋０４,以及Ｅｍｉｘ（Ｔ）模型标准方差,Ｓ＝０．２６５４Ｅ－０３ｋｃａｌ／ｍｏｌ。对乙基纤维素及５－氨基水杨酸与乙基纤维素混溶过程的能量和构象分析表明,混溶过程中有乙基纤维素分子内和乙基纤维素与乙基纤维素分子间氢键形成。对两相混溶体系进行了热力学分析。     

Enhanced film-forming properties for ethyl cellulose and starch acetate using n-alkenyl succinic anhydrides as novel plasticizers

Purpose: The aim of this study was to investigate the ability of n-alkenyl succinic anhydrides (n-ASAs) to improve the film-forming characteristics of a novel coating polymer, potato starch acetate degree of substitution 2.8 (SA). n-ASAs were also applied to improve the otherwise brittle properties of ethyl cellulose (EC) aqueous dispersion (Aquacoat^®) and EC solvent-based films. Methods: The effectiveness of two n-ASAs, 2-octenyl succinic anhydride (OSA) and 2-dodecen-1-ylsuccinic anhydride were evaluated as plasticizers. Mechanical properties, both water vapor and drug permeabilities, and glass transition temperatures of the cast free films were measured. Triethyl citrate and dibutyl sebacate were used as reference plasticizers. Results: The long hydrocarbon chain of n-ASA, with its accessible carbonyl groups, enabled a strong plasticization effect on the tested polymers. Due to the excellent mechanical properties (i.e., a tough film structure with considerable flexibility) and low permeability of the plasticized films, n-ASAs, and especially OSA proved to be an ideal plasticizer particularly for EC based coatings. Also, the EC aqueous dispersion plasticized with n-ASAs resulted in a markedly enhanced coalescence of the colloidal polymer particles, even at low drying temperatures. Conclusions: In applications where a coating with high flexibility is required, n-ASAs can be used as plasticizers at moderately high concentrations (up to 60–70%, w/w) without losing the high tensile strength, excellent toughness and low permeability of EC and SA films.