Investigation of a platelet factor 4 polymorphism on the immune response in patients with heparin-induced thrombocytopenia

A small fraction of patients who receive heparin develop heparin-induced thrombocytopenia (HIT) and, of these patients, a still smaller proportion develop associated thrombotic complications. Heparin-induced thrombocytopenia is caused by the formation of antibodies that bind to specific complexes of platelet factor 4 (PF4) and heparin. However, it remains uncertain why certain patients form these antibodies and develop HIT or why certain patients have thrombotic events. In this report we describe studies on individuals with and without HIT to determined if a potential PF4 polymorphism could explain differences in susceptibility to HIT. In the 10 control individuals and the 10 patients we studied, we did not find a difference in the PF4 sequences. Genetic difference in the PF4 antigenic target does not explain the occurrence of HIT in susceptible patients.     

The interaction of ancrod with human platelets

Ancrod, a serine protease purified from the venom of Agkistrodon rhodostoma, has been used as a therapeutic anticoagulant for a number of indications, including replacement of heparin in patients with heparin-induced thrombocytopenia. Ancrod has similar fibrinolytic activity to thrombin, but ancrod specifically cleaves only the alpha chain of fibrinogen, producing the characteristic fibrinopeptides A, AP and AY. Because ancrod has been used in patients with heparin-induced thrombocytopenia, it is important to ensure that ancrod does not directly affect the platelets and potentially increase the hemostatic effect. The effect of ancrod on platelets has not been well established, and there is not agreement in published studies. Additionally, some of the studies are over 15 years old and pre-date sensitive assays such as glycoprotein analysis. For these reasons, we investigated the interaction of ancrod with human platelets using direct and indirect, functional and biochemical techniques. Incubation of platelets with ancrod alone did not induce platelet aggregation or the release of dense-granule contents. Pre-incubation of platelets with ancrod did not augment or inhibit the maximal aggregation achieved with thrombin, nor did it affect the amount of serotonin release from dense granules caused by activation by thrombin. Studies of ancrod-treated platelets using monoclonal antibody-mediated radioimmunoprecipitation demonstrated that high concentrations of ancrod did not cause measurable cleavage of either the glycoproteins Ib-IX or IIb-IIIa. Incubation of radiolabeled platelets with ancrod-treated plasma also had no effect on the platelet glycoproteins, indicating that ancrod does not indirectly affect the major surface receptors. Direct binding studies using radiolabeled ancrod did not demonstrate specific binding to the platelet surface. Together these studies indicate that ancrod does not directly affect nor bind to platelets in vitro . The hypocoagulant state and subsequent platelet function defect resulting from the use of ancrod appears to be limited to the removal of fibrinogen from the circulation.     

Development of a high-yield expression and purification system for platelet factor 4

Heparin-induced thrombocytopenia (HIT) is an adverse drug reaction characterized by IgG antibodies bound to complexes of platelet factor 4 (PF4) and heparin. The majority of diagnostic tests for HIT rely on an exogenous source of PF4 to identify anti-PF4/heparin antibodies. These include the PF4-dependent enhanced serotonin release assay (PF4-SRA) among others. Using a bacterial expression system, we developed a novel and efficient method of producing recombinant human PF4 (rhPF4) that is biochemically and antigenically similar to platelet-derived human PF4. rhPF4 was produced using the pET expression system in the BL21(DE3) strain of Escherichia coli. The system was optimized for protein expression using isopropyl β-D-1-thiogalactopyranoside at different induction temperatures and incubation times. rhPF4 solubility was improved by using different detergents during cell lysis and by purifying with heparin affinity and ion exchange chromatography. Biochemical characteristics of rhPF4 were investigated using mass spectrometry, SDS-PAGE analysis, and gel filtration chromatography and compared to platelet-derived PF4. Antigenic and functional characteristics of rhPF4 were studied using the anti-PF4/heparin EIA and the PF4-SRA. Using this method, we could produce 11.4 ± 0.6 mg of pure rhPF4 per liter of bacterial culture. Absorbance readings from the anti-PF4/heparin EIA using platelet-derived and rhPF4 were highly correlated (n = 194; r = 0.9545, p < 0.0001); and functional release of serotonin in the PF4-SRA induced by anti-PF4/heparin antibodies was similar to either platelet-derived or rhPF4 and heparin (r = 0.9597, p < 0.0001). Our method of rhPF4 production is efficient and does not rely on a source of platelets. The rhPF4 purification method described produces greater yields at a lower cost than other current methods. The application of this method can improve the efficiency of biochemical investigations and HIT diagnostic testing by supplying sufficient amounts of PF4.     

Accuracy of three-dimensional dental resin models created by fused deposition modeling,stereolithography, and Polyjet prototype technologies: A comparative study

Objectives: The aim of this study was to assess the dimensional accuracy of fused deposition modeling (FDM)–, Polyjet-, and stereolithography (SLA)–produced models by comparing them to traditional plaster casts.Materials andMethods: A total of 12 maxillary and mandibular posttreatment orthodontic plaster casts were selected from the archives of the Orthodontic Department at the Indiana University School of Dentistry. Plaster models were scanned, saved as stereolithography files, and printed as physical models using three different three-dimensional (3D) printers: Makerbot Replicator (FDM), 3D Systems SLA 6000 (SLA), and Objet Eden500V (Polyjet). A digital caliper was used to obtain measurements on the original plaster models as well as on the printed resin models.Results: Comparison between the 3D printed models and the plaster casts showed no statistically significant differences in most of the parameters. However, FDM was significantly higher on average than were plaster casts in maxillary left mixed plane (MxL-MP) and mandibular intermolar width (Md-IMW). Polyjet was significantly higher on average than were plaster casts in maxillary intercanine width (Mx-ICW), mandibular intercanine width (Md-ICW), and mandibular left mixed plane (MdL-MP). Polyjet was significantly lower on average than were plaster casts in maxillary right vertical plane (MxR-vertical), maxillary left vertical plane (MxL-vertical), mandibular right anteroposterior plane (MdR-AP), mandibular right vertical plane (MdR-vertical), and mandibular left vertical plane (MdL-vertical). SLA was significantly higher on average than were plaster casts in MxL-MP, Md-ICW, and overbite. SLA was significantly lower on average than were plaster casts in MdR-vertical and MdL-vertical.Conclusions: Dental models reconstructed by FDM technology had the fewest dimensional measurement differences compared to plaster models.     

Hypergammaglobulinemia can be associated with a positive direct antiglobulin test, a nonreactive eluate, and no evidence of hemolysis

To determine the cause of a positive direct antiglobulin test (DAT), blood banks routinely perform serologic tests on eluates prepared from DAT-positive red cells. Negative eluates traditionally have been suspected to be associated with drug reactions. This report confirms that the most frequent cause of a positive DAT and a nonreactive eluate is hypergammaglobulinemia. The results of 74 patient samples with positive DATs were analyzed retrospectively. Eluates prepared from the red cells of 54 patients (72.9%) reacted; eluates from 20 patients (27.1%) did not react. This latter group had identical serologic and clinical findings, suggesting that they made up a homogeneous group. In particular, the patients had a positive DAT, a negative indirect antiglobulin test, and a negative eluate; an increased serum concentration of IgG; and no evidence of hemolysis. In a subsequent study, DATs were performed prospectively on red cells from 44 consecutive patients with elevated serum IgG levels. The serum IgG concentration was highest in the three patients whose red cells had a positive DAT. The DAT also became positive in two patients treated with high-dose intravenous gammaglobulin (IV IgG). These studies indicate that a negative eluate from red cells with a positive DAT, a common serologic finding, is often caused by hypergammaglobulinemia. The authors postulate that IgG binds nonspecifically to the red cells because of the hypergammaglobulinemia.     

Sowing confusion in the field: the interchangeable use of biosimilar terminology

The Biologics Price Competition and Innovation Act of 2009 (BPCI Act) created an abbreviated licensure pathway in the United States that allows for the development and approval of biologic products shown to be biosimilar to or interchangeable with a US Food and Drug Administration (FDA)-licensed reference product. FDA released the draft guidance for industry on Demonstrating Interchangeability with a Reference Product (hereafter referred to as the Draft Interchangeability Guidance) in January 2017. Despite FDA’s efforts, there continues to be a great deal of confusion and misinformation surrounding the topic of interchangeability. Here we discuss interchangeability, as well as substitution of biological products, with a focus on the US. Additionally, the separate topic of physician-mediated switching is covered and distinguished from interchangeability and substitution.     

Thrombogenic Effect of High-Dose Aspirin in Rabbits: RELATIONSHIP TO INHIBITION OF VESSEL WALL SYNTHESIS OF PROSTAGLANDIN I2-LIKE ACTIVITY

Aspirin is a promising antithrombogenic agent. It inhibits the generation of thromboxane A(2) by acetylating platelet cyclo-oxygenase. Aspirin also inhibits vessel wall production of PGI(2) which is an inhibitor of platelet aggregation, and therefore is potentially thrombotic. To investigate these two opposing effects we studied the effects of aspirin upon fibrin accretion onto experimentally induced venous thrombi in rabbits and on the PGI(2)-like activity of vessel wall using the thrombin-induced [(14)C]serotonin release assay. A 200-mg/kg dose of aspirin significantly augmented thrombus size when compared to (a) sodium salicylate administered in equal doses, (b) aspirin in a 10-mg/kg dose or (c) controls (P < 0.001). A 200-mg/kg dose of aspirin totally inhibited vessel wall PGI(2)-like activity whereas aspirin in a 10-mg/kg dose produced less inhibition, and 200 mg/kg sodium salicylate had no effect. Local instillation of tranylcypromine, an inhibitor of PGI(2) formation, also significantly augmented thrombus size compared to saline-treated controls and totally inhibited the production of PGI(2)-like activity. The thrombogenic effect of high dose aspirin was lost if an interval of 2.5 h or longer elapsed between vessel damage and drug administration, indicating that in contrast to the platelet, the effect of aspirin on vessel wall prostaglandin synthesis is relatively short-lived. It is concluded that aspirin, in doses higher than those used clinically, can augment experimental thrombosis, presumably by inhibiting the synthesis of vessel wall PGI(2).     

Drug-induced thrombocytopenia is associated with increased binding of IgG to platelets both in vivo and in vitro

Thrombocytopenia is a common serious adverse effect of drug treatment. A variety of in vitro diagnostic techniques to confirm the diagnosis are available, but the majority lack sufficient sensitivity to detect all cases of drug-induced thrombocytopenia. We studied 19 patients with suspected drug-induced thrombocytopenia and demonstrated that platelet- associated IgG (PAIgG) was elevated in all at the time of thrombocytopenia, and PAIgG returned to normal levels as the thrombocytopenia resolved. In the majority of patients, the platelet count rapidly returned to normal after the drug was discontinued; however, in six patients, the thrombocytopenia persisted well beyond the period of time that the offending drug would be expected to be cleared from the blood. In 13 patients, serum obtained after recovery was used to identify the drug responsible for the thrombocytopenia in an in vitro assay. In all cases, the addition of the drug historically associated with the thrombocytopenic episode was associated with an increased binding of IgG to control platelets. For uncertain reasons, the concentration of drug required to increase the in vitro binding of IgG to test platelets was often more than the concentration usually achieved in vivo. Wider application of these techniques may provide better understanding of the clinical characteristics and mechanisms responsible for drug-induce thrombocytopenia.     

Immunoglobulin G from patients with heparin-induced thrombocytopenia binds to a complex of heparin and platelet factor 4

Heparin-induced thrombocytopenia (HIT) is an important complication of heparin therapy. Although there is general agreement that platelet activation in vitro by the HIT IgG is mediated by the platelet Fc receptor, the interaction among the antibody, heparin, and platelet membrane components is uncertain and debated. In this report, we describe studies designed to address these interactions. We found, as others have noted, that a variety of other sulfated polysaccharides could substitute for heparin in the reaction. Using polysaccharides selected for both size and charge, we found that reactivity depended on two independent factors: a certain minimum degree of sulfation per saccharide unit and a certain minimum size. Hence, highly sulfated but small (< 1,000 daltons) polysaccharides were not reactive nor were large but poorly sulfated polysaccharides. The ability of HIT IgG to recognize heparin by itself was tested by Ouchterlony gel diffusion, ammonium sulfate and polyethylene glycol precipitation, and equilibrium dialysis. No technique demonstrated reactivity. However, when platelet releasate was added to heparin and HIT IgG, a 50-fold increase in binding of radio-labeled heparin to HIT IgG was observed. The releasate was then depleted of proteins capable of binding to heparin by immunoaffinity chromatography. Only platelet factor 4-immunodepleted releasate lost its reactivity with HIT IgG and heparin. Finally, to determine whether the reaction occurred on the surface of platelets or in the fluid phase, washed platelets were incubated with HIT IgG or heparin and after a wash step, heparin or HIT IgG was added, respectively. Reactivity was only noted when platelets were preincubated with heparin. Consistent with these observations was the demonstration of the presence of PF4 on platelets using flow cytometry. These studies indicate that heparin and other large, highly sulfated polysaccharides bind to PF4 to form a reactive antigen on the platelet surface. HIT IgG then binds to this complex with activation of platelets through the platelet Fc receptors.