The Outcome of Cemented Acetabular Components in Total Hip Arthroplasty for Osteoarthritis Defines a Proficiency Threshold: Results of 22,956 Cases From the Australian Orthopaedic Association National Joint Replacement Registry

BackgroundThe declining popularity of cemented acetabular components is incongruous, given the published results of prostheses implanted using contemporary techniques. The outcome of arthroplasty has previously been demonstrated to correlate with surgeon experience and volume of practice. We aim to explore if surgeon volume alters outcomes of cemented acetabular components based on survivorship data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).MethodsAn observational study was undertaken using a cohort of 22,956 patients with a primary diagnosis of osteoarthritis in the period 2003-2016 in whom cemented acetabular components were implanted. The cohort was stratified by age (greater than or less than 65 years) and annualized surgical volume of ≤10, >10-≤25, and >25 cases.ResultsStratified by age and volume, there was a protective benefit against revision conveyed at volume thresholds of 10 cases per annum and 25 cases per annum for patients ≥65 years of age and <65 years of age, respectively.ConclusionCemented total hip arthroplasty has excellent survivorship out to 15 years based on AOANJRR data. This survivorship is further improved if surgeons perform a higher volume of cases, with >25 cases conferring the greatest benefit. The AOANJRR data set is used to define best practice; surgeons who choose to utilize cemented acetabular fixation should be encouraged to perform this technique in adequate volumes to minimize revision risk and ensure the preservation of this important surgical skill set.     

Primary cemented total hip arthroplasty—an Indian experience

We report outcome of 9-year follow-up of 50 Charnley cemented primary arthroplasties in 47 patients performed between 1996 and 1999. The minimum follow-up period was 5 years with a mean of 7 years. All hip joints were thoroughly assessed preoperatively to document patients’ functional level and Harris hip score was calculated. All the patients were disabled because of pain in hip and 45 (90%) had used walking aids. At follow-up all patients were living. The radiographs of all patients were available for the entire follow-up period. Of the 50 operated hips, only 2 patients (4%) complained of pain while all the rest were free of pain. Postoperatively only 10 (20%) patients used support for walking. At follow-up none of the hips were revised. Two patients (4%) had dislocation in postoperative period in which reduction was done under anesthesia. In one patient (2%) prosthesis and cement was removed because of deep infection. In two patients (4%) radiolucent clear zone was seen at bone cement interface on acetabular side and three (6%) patients had it on femoral component. None of the patients developed deep vein thrombosis or heterotopic bone. In postoperative period the Harris hip score was calculated in each case and compared with the preoperative score to evaluate the outcome. Significant improvement was found in Harris hip score after surgery.     

Uncemented versus cemented arthroplasty after metal-on-metal total hip replacement in patients with femoral neck fractures: a retrospective study

ObjectiveTo compare the clinical outcomes of primary metal-on-metal total hip replacement (MoM-TR) converted to uncemented total hip replacement (UTR) or cemented total hip replacement (CTR) in patients with femoral neck fractures (AO/OTA: 31B/C).MethodsPatient data of 234 UTR or CTR revisions after primary MoM-TR failure from March 2007 to January 2018 were retrospectively identified. Clinical outcomes, including the Harris hip score (HHS) and key orthopaedic complications, were collected at 3, 6, and 12 months following conversion and every 12 months thereafter.ResultsThe mean follow-up was 84.12 (67–100) months for UTR and 84.23 (66–101) months for CTR. At the last follow-up, the HHS was better in the CTR- than UTR-treated patients. Noteworthy dissimilarities were correspondingly detected in the key orthopaedic complication rates (16.1% for CTR vs. 47.4% for UTR). Statistically significant differences in specific orthopaedic complications were also detected in the re-revision rate (10.3% for UTR vs. 2.5% for CTR), prosthesis loosening rate (16.3% for UTR vs. 5.9% for CTR), and periprosthetic fracture rate (12.0% for UTR vs. 4.2% for CTR).ConclusionIn the setting of revision of failed primary MoM-TR, CTR may demonstrate advantages over UTR in improving functional outcomes and reducing key orthopaedic complications.     

Cement Mantle Quality and Stem Alignment in Cemented Collarless Polished Tapered Stems Implanted via the Direct Anterior and Direct Lateral Approaches: A Single Institution Experience

BackgroundThe aim of this study was to compare the stem alignment and the quality of cement mantle of collarless polished tapered cemented stems inserted through the direct anterior approach (DAA) and the direct lateral approach (DLA).MethodsA comparative retrospective study of 232 hybrid total hip arthroplasties using a cemented collarless polished tapered stem through either the DAA (n = 147) or DLA (n = 85) was performed. Radiographic evaluation included stem alignment, cement mantle quality, and cement mantle thickness.ResultsOn anteroposterior radiographs, stems implanted through the DLA were more likely to be in neutral alignment, than those implanted through the DAA (83.5%[n = 71] versus 71.4% [n = 105]; P = <.001). No difference between approaches was noted for stem alignment on lateral radiographs or cement mantle quality. Multivariate analysis revealed factors associated with suboptimal cement mantle and included Dorr type B or C femur as well as male gender. A mean cement mantle thickness ≥2mm was achieved in all Gruen zones for both approaches.ConclusionIn our series, the DAA was associated with a higher incidence of coronal plane stem malalignment compared to the DLA when using cemented tapered polished femoral components for total hip arthroplasty. No difference in lateral stem alignment or cement mantle quality was found.     

Cemented vs Uncemented Femoral Components: A Randomized,Controlled Trial at 10 Years Minimum Follow-Up

BackgroundThe type of total knee arthroplasty (TKA) fixation (cemented or uncemented) is still subject to debate. The aim of this study is to assess the survival rate, clinical outcomes, and radiological results of TKA according to the fixation type.MethodsA total of 130 patients were randomly assigned to either the cement group (cemented femoral and tibial implants) or the hybrid group (cemented tibial implant, uncemented femoral implant). The inclusion criteria were patients between 50 and 90 years old who underwent primary TKA for osteoarthritis between 2004 and 2005 without a history of open knee surgery. Revisions and complications were reported, as well as clinical scores and radiological signs of loosening.ResultsOne hundred eighteen patients had complete data at 10 years of minimum follow-up (59 in each group). The mean age was 72 years old. The mean follow-up was 13 years. The survival rate was 98% at 13 years in both groups (1 aseptic loosening at 2 years in the cement group, 1 septic loosening in the hybrid group). The complication rate in the cement group was 8.5% (n = 5) vs 12.1% (n = 7) in the hybrid group (P = .8). The clinical results were not significantly different. In the cement group, 25% of patients (n = 15) had radiolucent lines at 10 years. In the hybrid group, 33% of patients had bone transparencies, not evolving or symptomatic.ConclusionAt a minimum follow-up of 10 years, there were no significant differences between cemented TKA and hybrid TKA for the survivorship, the complication rate, the clinical scores, or the radiological signs of loosening.Level of EvidenceI.     

Results of Cemented Posterior-Stabilized Total Knee Arthroplasty in Obese Patients With an Average 10-Year Follow-Up

BackgroundObese and morbidly obese patients undergoing primary total knee arthroplasty (TKA) place significant stress at the bone-cement-implant interface over the life of the patient. The purpose of this study is to evaluate results of cemented, posterior-stabilized TKA in obese and morbidly obese patients at an average follow-up of 10 years.MethodsRetrospective study of 181 patients who had a cemented, posterior-stabilized TKA between 2000 and 2013 with body mass index >35 at the time of surgery was conducted. Clinical data and radiographs were evaluated along with survivorship, complications, and revisions. Minimum follow-up was 5 years with an average follow-up of 10 years.ResultsThere were 135 women and 46 men in the study, with mean age of 60.2 years (range 43-80), mean body mass index of 42.0 (range 35.1-66.1), and an average follow-up of 10 years (range 5-18). There were a total of 39 failures (22%) that underwent revision TKA surgery with mean time to revision of 8 years. Failures included 25 (14%) cases of aseptic loosening; 9 (5%) polyethylene wear; 2 (1%) prosthetic joint infection; and 3 additional revisions for instability, pain, and stiffness. There were a total of 11 cases of isolated tibial component loosening and 13 for both tibial and femoral loosening. Survivorship at 15 years with aseptic loosening as the endpoint was 86.7%, and for all causes 79.6% at 15 years.ConclusionAseptic loosening is the leading cause of failure following TKA in obese and morbidly obese patients with decreasing survivorship from 96.1% to 91.2% and 86.7% at 5, 10, and 15 years, respectively.     

Multilayer Diamond Coatings Applied to Micro-End-Milling of Cemented Carbide

Cobalt-cemented carbide micro-end mills were coated with diamond grown by chemical vapor deposition (CVD), with the purpose of micro-machining cemented carbides. The diamond coatings were designed with a multilayer architecture, alternating between sub-microcrystalline and nanocrystalline diamond layers. The structure of the coatings was studied by transmission electron microscopy. High adhesion to the chemically pre-treated WC-7Co tool substrates was observed by Rockwell C indentation, with the diamond coatings withstanding a critical load of 1250 N. The coated tools were tested for micro-end-milling of WC-15Co under air-cooling conditions, being able to cut more than 6500 m over a period of 120 min, after which a flank wear of 47.8 μm was attained. The machining performance and wear behavior of the micro-cutters was studied by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Crystallographic analysis through cross-sectional selected area electron diffraction patterns, along with characterization in dark-field and HRTEM modes, provided a possible correlation between interfacial stress relaxation and wear properties of the coatings. Overall, this work demonstrates that high adhesion of diamond coatings can be achieved by proper combination of chemical attack and coating architecture. By preventing catastrophic delamination, multilayer CVD diamond coatings are central towards the enhancement of the wear properties and mechanical robustness of carbide tools used for micro-machining of ultra-hard materials.