Dry eye signs and symptoms in aromatase inhibitor treatment and the relationship with pain

PurposeAromatase inhibitors (AIs) limit the synthesis of oestrogen in peripheral tissues thus lowering levels of oestrogen. The primary aim was to evaluate whether women treated with AIs have altered dry eye symptoms and signs. A sub-aim was to investigate whether symptoms of dry eye in postmenopausal women were associated with symptoms of non-eye pain, ocular pain and self-rated pain perception.MethodsThis cross-sectional, observational, single visit study recruited 56 postmenopausal women (mean age 64.1 + 7.9 years) and 52 undergoing AI treatment (mean age 66.6 + 9.0). Ocular symptoms (OSDI, MGD14) and pain questionnaires (PSQ, OPAS) were administered and signs of dry eye and meibomian gland dysfunction were evaluated.ResultsAlmost half of each group reported dry eye symptoms, defined as OSDI>12 (48% control, 46% AI). The PSQ score was significantly higher in the AI group (p = 0.04). Neither frequency or severity of dry eye (or MGD) symptoms scores were significantly different between groups. In the AI group, meibomian gland expressibility score was worse (p = 0.003); there were no differences in any other signs. Higher OSDI scores were associated with higher OPAS eye-pain scores (r = 0.49, p < 0.001), but not OPAS non-eye pain (r = 0.09, p = 0.35). Pain perception (PSQ) showed a moderate positive association with OPAS eye-pain (r = 0.30, p = 0.003).ConclusionsIn this study elevated ocular symptoms were observed in both the AI treated and the untreated groups, with no difference between the groups. Women undergoing AI treatment for early stage breast cancer had worse meibum expressibility score and increased pain perception compared to an untreated group of women.     

环丁砜在地面水中最高容许浓度的研究

作者对地面水中不同浓度的环丁砜进行了系统实验研究与现场调查。结果表明,环丁砜对水臭觉的实际阈浓度为10.6mg/L,对水的生化需氧过程无明显抑制作用,慢性毒性阈剂量为2.5mg/kg,最大无作用剂量为0.25mg/kg,无诱变性,280mg/kg无致畸性。据此,作者建议地面水中环丁砜的最高容许浓度为5mg/L,结合现场调查,认为该浓度是安全可行的。     

三维超声对胎儿体表畸形的诊断价值

目的:探讨三维超声成像在胎儿体表畸形诊断的临床价值。方法:利用三维超声仪对在我院进行产前检查的妊娠20~41周的3241例孕妇、共3277个胎儿进行二维及三维超声检查,统计并比较超声诊断与随访结果。结果:140例各种发育异常胎儿,其中体表畸形胎儿34例,二维超声诊断正确者21例,9例体表畸形胎儿二维超声检查不能作出明确诊断;三维超声进一步检查诊断正确者共30例;二维及三维超声检查误诊1例胎儿足内翻,生后证实正常,漏诊1例耳廓缺失、2例多指畸形,生后随访证实。三维超声对胎儿体表畸形检出的敏感性、特异性及准确性分别为90.91%、99.97%、99.88%;二维超声对胎儿体表畸形检出的敏感性、特异性及准确性分别为63.64%、99.97%、99.60%。结论:三维超声能直观显示胎儿体表结构,三维超声检查诊断胎儿体表畸形的敏感性、特异性及准确性高,是二维超声检查的重要补充,与二维超声联合应用,可提高胎儿体表畸形的检出率。     

Investigation of melt agglomeration process with a hydrophobic binder in combination with sucrose stearate

The melt agglomeration process of lactose powder with hydrogenated cottonseed oil (HCO) as the hydrophobic meltable binder was investigated by studying the physicochemical properties of molten HCO modified by sucrose stearates S170, S770 and S1570. The size, size distribution, micromeritic and adhesion properties of agglomerates as well as surface tension, contact angle, viscosity and specific volume of molten HCO, with and without sucrose stearates, were examined. The viscosity, specific volume and surface tension of molten HCO were found to be modified to varying extents by sucrose stearates which are available in different HLB values and melt properties. The growth of melt agglomerates was promoted predominantly by an increase in viscosity, an increase in specific volume or a decrease in surface tension of the molten binding liquid. The agglomerate growth propensity was higher with an increase in inter-particulate binding strength, agglomerate surface wetness and extent of agglomerate consolidation which enhanced the liquid migration from agglomerate core to periphery leading to an increased surface plasticity for coalescence. The inclusion of high concentrations of completely meltable sucrose stearate S170 greatly induced the growth of agglomerates through increased specific volume and viscosity of the molten binding liquid. On the other hand, the inclusion of incompletely meltable sucrose stearates S770 and S1570 promoted the agglomeration mainly via the reduction in surface tension of the molten binding liquid with declining agglomerate growth propensity at high sucrose stearate concentrations. In addition to being an agglomeration modifier, sucrose stearate demonstrated anti-adherent property in melt agglomeration process. The properties of molten HCO and melt agglomerates were dependent on the type and concentration of sucrose stearate added.     

The growth of the second underpotentially deposited silver layer on Pt(100)

The electrodeposition of Ag on Pt(100)-(1 × 1) in perchlorate electrolyte was studied by means of time-resolved in situ scanning tunnelling microscopy (STM) and cyclic voltammetry. One monolayer of Ag is deposited underpotentially (upd) ca. 500 mV positive of the Ag⁺/Ag equilibrium potential. Several millivolts positive of the equilibrium potential, a second well defined upd layer forms. Its growth was observed to proceed via island formation and coalescence. This process occurs in two separate stages that manifest themselves in voltammetric peaks as well as in the STM images.     

Surface modification of titanium by etching in concentrated sulfuric acid

OBJECTIVE: The purpose of this study was to characterize the etching behavior of titanium in concentrated sulfuric acid and discuss its application on surface modification of titanium for biological use. METHODS: Commercially pure titanium (cpTi) plate was etched in 48% H2SO4 at RT -90 degrees C for 0.25-8 h. The weight loss was derived from the weight differences before and after etching. The surfaces after etching were characterized by surface roughness, X-ray diffractometry, and scannning electron spectroscopy. The apparent activation energy of the dissolution of cpTi into acid was derived from an Arrhenius plot of the rate of weight loss versus the acid temperature. RESULTS: The surface roughness of cpTi increased with the acid temperature and etching time. The surface roughness was strongly related to the weight loss. The weight loss increased drastically with the acid temperature after an initial period, which shortened with increasing acid temperature. The apparent activation energy for the dissolution of cpTi in H2SO4 was derived as 67.8 kJ/mol. SIGNIFICANCE: This study indicates that etching with concentrated sulfuric acid is an effective way to modify the surface of titanium for biological applications.     

UB-I粘结剂粘结面的微形态观察

目的：研究UB-Ⅰ粘结剂的粘结界面和粘结表面的微形态特点。方法：用扫描电子显微镜观察UB-Ⅰ和牙本质的粘结界面和粘结表面。结果：UB-Ⅰ粘结剂在牙本质小管内可聚合形成树脂突，在牙本质小管内的树脂突表面有树脂侧枝呈树枝状横行排列，并且和相邻的树脂突相连接，在牙本质和复合树脂之间有杂合层形成。结论：UB-Ⅰ粘合剂具有良好的渗透性，与牙本质之间可以形成良好的机械嵌合。     

Pretreatment of bone with osteoclasts affects phenotypic expression of osteoblast-like cells.

Implant surface morphology regulates osteoblast phenotypic expression. Osteoblast sensitivity to non-biologic surfaces suggests that native bone surface features may also affect osteoblast response. To test this, MG63 osteoblast-like cells were grown for 7 days on bovine cortical bone wafers pretreated with rat bone marrow osteoclasts for 0, 10 or 20 days. Response to osteoclast-treated surfaces was compared to the response of MG63 cells to titanium surfaces with smooth and rough microtopographies. Cell number, differentiation (alkaline phosphatase activity and osteocalcin levels), and local factors (PGE(2) and TGF-beta1) were measured in confluent cultures. Compared to culture on plastic, cell number was reduced on all three types of bone wafers; this effect was dose-dependent with increasing resorption of the surface. Alkaline phosphatase specific activity was increased (P相似文献