Bonding to industrial indirect composite blocks: A systematic review and meta-analysis

ObjectiveThe aim of this systematic review and meta-analysis was to evaluate the effect of surface conditioning methods on the bond strength of industrial indirect composite blocks (ICs).MethodsBased on the PICOS strategy, the Medline via PubMed, Embase and Web of Science (ISI – Web of Knowledge) electronic databases were searched for peer-reviewed articles in both English and Chinese, with no publication year limit. In vitro studies evaluating the effects of surface conditioning on the bond strength of ICs were selected. The meta-analysis was conducted to calculate the mean difference between surface-conditioned ICs and unconditioned controls. Subgroup analysis was performed to evaluate the different surface conditioning methods, separately for polymer-infiltrated ceramic network (PICN) material and the ICs with dispersed fillers (ICDFs). Meta-analyses were performed with a random-effects model at a significance level of 0.05.Results and SignificanceFrom 802 relevant studies, 25 were selected for full-text analysis. Nineteen studies were eligible for inclusion in this systematic review, whereas 9 studies were included in the meta-analysis. A manual search of the principal periodicals specific to the area resulted in no additional articles. The meta-analysis indicated a significant difference in bond strength between the surface-conditioned ICs and controls under both non-aged and aged conditions. The combination of mechanical and chemical conditioning yielded the highest bond strength of ICs. This meta-analysis suggests that chemical etching followed by a universal primer and alumina air abrasion followed by a silane coupling agent could be considered the best strategy for optimizing the bond strength of PICN materials and ICDFs under aged conditions, respectively.     

CA153联合CA199对良恶性腹腔积液的鉴别诊断价值

目的探讨腹腔积液中CA153联合CA199对良恶性腹腔积液的鉴别诊断价值。方法选择98例腹腔积液患者,经手术病理诊断为恶性腹腔积液者为观察组(48例),良性腹腔积液者为对照组(50例)。检测并比较2组患者腹腔积液中的CA153、CA199水平及CA153、CA199的阳性结果,分析CA153及CA155单用及联合应用对恶性腹腔积液的诊断效能。结果观察组腹腔积液中的CA153及CA199水平均明显高于对照组,P <0. 05。观察组CA153及CA199阳性率明显高于对照组,P <0. 05。CA153、CA199对恶性腹腔积液诊断的敏感性、特异性及准确性对比,差异无统计学意义(P> 0. 05);CA153+CA199的敏感性、特异性及准确性明显高于单项CA153及CA199(P <0. 05)。结论 CA153与CA199单项检测对恶性腹腔积液的诊断价值有限,CA153+CA199对恶性腹腔积液的诊断价值较高,值得临床推广应用。     

大孔吸附树脂分离纯化何首乌有效成分二苯乙烯苷的研究

目的研究不同型号大孔吸附树脂纯化何首乌中二苯乙烯苷的工艺条件及参数。方法以静态饱和吸附量、洗脱量、静态洗脱率为考察指标,比较了7种大孔树脂,并对HPD500树脂的动态比上柱量、比吸附量、比洗脱量进行了考察,以二苯乙烯苷转移率和纯度为指标对树脂吸附工艺条件进行了筛选。结果所比较的7种树脂中,HPD500型树脂具有最佳的吸附及洗脱参数,其动态饱和吸附量达到151.7mg·g-1干树脂,其最佳工艺为以6倍柱体积去离子水、4倍柱体积10%乙醇、6倍柱体积60%乙醇依次洗脱,二苯乙烯苷转移率为95%,其纯度为75.3%。结论HPD500树脂吸附性能较好,适合于何首乌中二苯乙烯苷的纯化。     

后牙两段式可摘局部义齿的设计与制作

目的:改进常规可摘局部义齿设计的不足,增进固位、稳定。方法:采用两段式义齿结构、两个就位方向和插销锁连接固定。结果:义齿的固位、稳定效果明显提高。结论:插销式分段义齿是对常规可摘局部义齿的一种补充,对主基牙过度倾斜、固位要求高的患者,能够明显改善修复效果。     

碳纤维根管桩的研制

目的研究高强度碳纤维增强复合树脂根管桩的加工成型工艺.方法用湿法制备碳纤维预浸料,在预成型模具中预成型,然后在成型模具中经特殊的工艺进行成型,最后用车床加工成预定形状的桩钉;并测试其弯曲强度、剪切强度和碳纤维含量.结果随着碳纤维含量的增加,根管桩的弯曲强度和剪切强度均逐渐增加.碳纤维含量达到67.13%时,弯曲强度和剪切强度分别达到406MPa和653.86MPa.结论高强度的碳纤维根管桩可以满足临床需要.     

Development of a Device for Removing a Partial Denture in a Patient with Scleroderma

Scleroderma is a chronic disease that has been associated with immune dysfunction. One of the oral manifestations is microsomia, a result of collagen deposition in the perioral tissues. The complexity of treating these patients includes limited mouth opening ability, and difficulty inserting and removing dentures due to finger deformity. This article will describe an appliance specially designed especially for scleroderma patients, which facilitates treatment of the patient with removable partial dentures (RPD).     

Malodour in denture wearers: an ill-defined problem

Denture plaque has not been studied to the same extent as dental plaque, and although there are many similarities in microbial composition, there are some significant differences. Denture-induced stomatitis is associated with poor denture hygiene, a more acidogenic plaque and the presence of Candida albicans . Obligate Gram-negative anaerobic micro-organisms, although present in denture plaque, have rarely been specifically investigated. Opportunist pathogens including coliforms and staphylococci have been isolated from dentures. Teeth adjacent to partial dentures are more susceptible to caries and periodontal diseases, perhaps due to an increased plaque buildup at the prosthesis/tooth interface. Little work has been published on malodour associated with dentures. The inert material provides a substratum for the plaque biofilm, which encompasses a range of odour-producing species. The microbiology of the tongue in denture wearers has not been specifically studied. Thus the nature, origin and extent of malodour in denture wearers is ill-defined, but many species capable of producing malodorous compounds are present. The wide age and health range presented by denture wearers further confounds investigation. There is a need for further work in the area, both for cosmetic- and health-associated reasons in the increasing elderly population.     

Early Designs for the Occlusal Anatomy of Posterior Denture Teeth: Part III

Part III of this series of articles, like Part II, reviews the pioneering efforts in the 19th century to improve the quality of artificial teeth. The focus of this article, unlike that of Part II, is specifically modifications in the design of the occlusal anatomy of the 19th century denture teeth, along with the theories of mandibular movement that inspired those modifications. This article concludes the introductory phase of this project, which seeks to unravel the confusing history of the development of (posterior) denture teeth.