Non-surgical treatment of peri-implant pathology

Abstract:  Introduction:  Peri-implant pathologies consist of an inflammatory process affecting the soft and hard tissues surrounding the implants. Chlorhexidine is considered the gold standard antiseptic, with a large variety of choice in administration. In this study, a protocol for the irrigation of peri-implant pockets with a chlorhexidine gel, using a plastic needle for the delivery of the product into the peri-implant pockets is described. Study participants and methods:  Nine patients with at least one implant presenting peri-implant pathology (inflamed soft tissue associated with bone loss around the implant) were enrolled in this prospective clinical study, and followed-up for 1 year, where clinical parameters such as modified plaque index, modified bleeding index, probing pocket depths, attachment levels were assessed at baseline, 1 month, and 1 year after implementation of the treatment protocol. Results:  Treatment success was achieved in eight of the nine patients (and in 11 of the 13 implants) according to the success criteria adopted by the authors of this study. Discussion:  Infection control lies at the heart of peri-implant treatment. The control of three factors such as optimal diagnosis, removal of the aetiological factor of the disease (proper removal of debris and decontamination of the peri-implant sulcus/pocket) and a good patient's oral hygiene self-care represents the key to success, resulting in good treatment outcomes when managing peri-implant pathologies. The protocol used (irrigation of peri-implant pockets with chlorhexidine gel delivered by a plastic needle) is considered to be of utility.     

Is there a lower threshold value of bone density for early loading protocols of dental implants?

This clinical study aimed to determine the bone density in dental implant recipient sites using computerized tomography (CT) and to establish a lower threshold value of bone density for early loading protocols. The study group was composed of 100 early loaded implants in 42 patients. A total of four groups were established according to the loading time and implant sites. The bone density of each recipient site for implant placement was determined using CT. The maximum insertion torque values were recorded with torque controlling machine. Implant stability measurements were performed with resonance frequency analyser. The bone density values varied from 528 to 1231 HU. It was found that mean bone density, insertion torque and resonance frequency analysis values were 887 +/- 180 HU, 41.2 +/- 6 Ncm, and 73.7 +/- 4 ISQ, respectively. Strong correlations were found between these three parameters. CT may be a useful tool for assessing the bone density of recipient areas before implant placement, and the early loading of dental implants may be possible in the implant sites where bone density is over 528 HU.     

Early endosseous integration enhanced by dual acid etching of titanium: a torque removal study in the rabbit

Textured implant surfaces are thought to enhance endosseous integration. Torque removal forces have been used as a biomechanical measure of anchorage, or endosseous integration, in which the greater forces required to remove implants may be interpreted as an increase in the strength of bony integration. The purpose of this study was to compare the torque resistance to removal of screw-shaped titanium implants having a dual acid-etched surface (Osseotite) with implants having either a machined surface, or a titanium plasma spray surface that exhibited a significantly more complex surface topography. Three custom screw-shaped implant types - machined, dual acid-etched (DAE), and titanium plasma sprayed (TPS) - were used in this study. Each implant surface was characterized by scanning electron microscopy and optical profilometry. One DAE implant was placed into each distal femur of eighteen adult New Zealand White rabbits along with one of the other implant types. Thus, each rabbit received two DAE implants and one each of the machined, or TPS, implants. All implants measured 3.25 mm in diameter x 4.00 mm in length without holes, grooves or slots to resist rotation. Eighteen rabbits were used for reverse torque measurements. Groups of six rabbits were sacrificed following one, two and three month healing periods. Implants were removed by reverse torque rotation with a digital torque-measuring device. Three implants with the machined surface preparation failed to achieve endosseous integration. All other implants were anchored by bone. Mean torque values for machined, DAE and TPS implants at one, two and three months were 6.00+/-0.64 N-cm, 9.07+/-0.67 N-cm and 6.73+/-0.95 N-cm; 21.86+/-1.37 N-cm, 27.63+/-3.41 N-cm and 27.40+/-3.89 N-cm; and 27.48+/-1.61 N-cm, 44.28+/-4.53 N-cm and 59.23+/-3.88 N-cm, respectively. Clearly, at the earliest time point the stability of DAE implants was comparable to that of TPS implants, while that of the machined implants was an order of magnitude lower. The TPS implants increased resistance to reverse torque removal over the three-month period. The results of this study confirm our previous results that demonstrated enhanced bony anchorage to dual acid-etched implants as compared to machined implants. Furthermore, the present results indicate that dual acid etching of titanium enhances early endosseous integration to a level which is comparable to that achieved by the topographically more complex TPS surfaces.     

Validation of an experimental polyurethane model for biomechanical studies on implant supported prosthesis--tension tests

Objectives

The complexity and heterogeneity of human bone, as well as ethical issues, frequently hinder the development of clinical trials. The purpose of this in vitro study was to determine the modulus of elasticity of a polyurethane isotropic experimental model via tension tests, comparing the results to those reported in the literature for mandibular bone, in order to validate the use of such a model in lieu of mandibular bone in biomechanical studies.

Material and Methods

Forty-five polyurethane test specimens were divided into 3 groups of 15 specimens each, according to the ratio (A/B) of polyurethane reagents (PU-1: 1/0.5, PU-2: 1/1, PU-3: 1/1.5).

Results

Tension tests were performed in each experimental group and the modulus of elasticity values found were 192.98 MPa (SD=57.20) for PU-1, 347.90 MPa (SD=109.54) for PU-2 and 304.64 MPa (SD=25.48) for PU-3.

Conclusion

The concentration of choice for building the experimental model was 1/1.     

Effect of bisphosphonates on anodized and heat-treated titanium surfaces: an animal experimental study

Background: Recent investigations reported that osseointegration of titanium implants can be significantly reinforced with a nanostructure treated with anodic oxidation and heat treatment. This experimental study investigates the effect of bisphosphonates on the nanotubular implant surface in rats. Methods: Thirty‐six titanium implants were divided into three groups: 1) machine‐turned (MT), 2) anodized and heat‐treated (AH), and 3) anodized and heat‐ and bisphosphonate‐treated (AHB) groups. The 36 implants were randomly placed in both tibias of 18 male Wistar rats. After 2 and 4 weeks, the levels of osseointegration of the implants were evaluated by a removal torque test and microcomputerized tomography (μCT). Peri‐implant bone tissue on the extracted region was examined for the expression of type I collagen and osteocalcin. Results: The AHB group showed the highest removal torque at 2 and 4 weeks (13.92 ± 1.51 Ncm and 18.10 ± 2.15 Ncm, respectively) followed, in order, by the AH group (11.63 ± 1.58 Ncm at 2 weeks and 14.80 ± 2.34 Ncm at 4 weeks) and MT group (4.30 ± 0.76 Ncm at 2 weeks and 6.20 ± 1.33 Ncm at 4 weeks) with statistically significant differences between the MT and other two groups at both time points. μCT images also revealed a denser appearance around implants in the AHB group than in the other groups. Levels of type I collagen and osteocalcin expression were similar between the MT and AH groups; however, the values were significantly higher in the AHB group compared to the other groups, which were 220.85% ± 71.09% and 363.04% ± 100.21%, respectively (P <0.05). Conclusion: Within the limits of this experiment, it was concluded that surface loading with bisphosphonates significantly improved the degree of osseointegration of titanium implants with a nanostructure.     

Functional and aesthetic treatment outcomes after immediate jaw reconstruction using a fibula flap and dental implants

Purpose

Microvascular fibula flap surgery is a reliable and effective procedure for reconstructing the jaws after tumour surgery. This procedure allows the placement of dental implants after bone consolidation. This study was designed to evaluate the oral, functional, and aesthetic rehabilitation of tumour patients with immediate fibula transfer and dental implants and included assessment of diet, speech, and aesthetics.

Osteoporosis and Osseointegration of Implants

According to medical literature, osteoporosis and related bone pathologies are increasing in epidemic proportions. The exact etiology of the disease is unknown, but hormonal, dietary, and genetic factors all contribute to the related loss of bone density. In the disease process, bone loss occurs throughout the body. Research indicates that the mandible and maxilla are affected, and show oral manifestations. There is no scientific data to contraindicate the use of two-step osseointegrated implants in osteoporotic individuals. The purpose of this article is to review the literature regarding osteoporosis and its relationship to oral bone loss.     

Guided bone regeneration using titanium grids: report of 10 cases

In order to ensure an adequate space where new bone can be formed in guided bone regeneration (GBR), most surgeons fill bone defects with biomaterials. In this work we evaluated new bone regeneration in 10 patients using only a blood clot protected with titanium grids and non-resorbable membranes, without any filling material. A manual measurement of the size of the bone defect, using a plastic probe, was performed at 2 surgical steps. After 5 months of treatment, a biopsy was taken from each patient, fixed and embedded in PMMA, examined microradiographically and morphologically to evaluate the newly-formed bone. Our results showed a good repair of the defects by bone regeneration (about 85% overall), high mineral density of new bone around the implants after 5 months, and steady state deposition processes. These results in GBR, without filling material, appear very promising for implantology and reconstructive odontostomatology practice.