Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Novel Compounds Identified by Structure-Based Prion Disease Drug Discovery Using In Silico Screening Delay the Progression of an Illness in Prion-Infected Mice

The accumulation of abnormal prion protein (PrP^Sc) produced by the structure conversion of PrP (PrP^C) in the brain induces prion disease. Although the conversion process of the protein is still not fully elucidated, it has been known that the intramolecular chemical bridging in the most fragile pocket of PrP, known as the “hot spot,” stabilizes the structure of PrP^C and inhibits the conversion process. Using our original structure-based drug discovery algorithm, we identified the low molecular weight compounds that predicted binding to the hot spot. NPR-130 and NPR-162 strongly bound to recombinant PrP in vitro, and fragment molecular orbital (FMO) analysis indicated that the high affinity of those candidates to the PrP is largely dependent on nonpolar interactions, such as van der Waals interactions. Those NPRs showed not only significant reduction of the PrP^Sc levels but also remarkable decrease of the number of aggresomes in persistently prion-infected cells. Intriguingly, treatment with those candidate compounds significantly prolonged the survival period of prion-infected mice and suppressed prion disease-specific pathological damage, such as vacuole degeneration, PrP^Sc accumulation, microgliosis, and astrogliosis in the brain, suggesting their possible clinical use. Our results indicate that in silico drug discovery using NUDE/DEGIMA may be widely useful to identify candidate compounds that effectively stabilize the protein.Electronic supplementary materialThe online version of this article (10.1007/s13311-020-00903-9) contains supplementary material, which is available to authorized users.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

A modality-specific somatosensory evoked potential test protocol for clinical evaluation: A feasibility study

ObjectiveWe aimed to establish an objective neurophysiological test protocol that can be used to assess the somatosensory nervous system.MethodsIn order to assess most fiber subtypes of the somatosensory nervous system, repetitive stimuli of seven different modalities (touch, vibration, pinprick, cold, contact heat, laser, and warmth) were synchronized with the electroencephalogram (EEG) and applied on the cheek and dorsum of the hand and dorsum of the foot in 21 healthy subjects and three polyneuropathy (PNP) patients. Latencies and amplitudes of the modalities were assessed and compared. Patients received quantitative sensory testing (QST) as reference.ResultsWe found reproducible evoked potentials recordings for touch, vibration, pinprick, contact-heat, and laser stimuli. The recording of warm-evoked potentials was challenging in young healthy subjects and not applicable in patients. Latencies were shortest within Aβ-fiber-mediated signals and longest within C-fibers. The test protocol detected function loss within the Aβ-fiber and Aδ-fiber-range in PNP patients. This function loss corresponded with QST findings.ConclusionIn this pilot study, we developed a neurophysiological test protocol that can specifically assess most of the somatosensory modalities. Despite technical challenges, initial patient data appear promising regarding a possible future clinical application.SignificanceEstablished and custom-made stimulators were combined to assess different fiber subtypes of the somatosensory nervous system using modality-specific evoked potentials.     

基因间长链非编码RNA152靶向微小RNA?103a?3p对非小细胞肺癌细胞增殖和侵袭迁移的影响

目的探讨基因间长链非编码RNA 152(LINC00152)靶向调控微小RNA-103a-3p(miR-103a-3p)表达及对非小细胞肺癌(NSCLC)细胞增殖和侵袭迁移的影响。方法采用实时定量PCR(QPCR)检测正常肺上皮细胞BEAS-2B及NSCLC细胞(ANIP-973、NCI-H157、A549和NCI-H1975)的LINC00152水平。选取LINC00152水平最高的细胞分别转染LINC00152特异性小干扰RNA(si-LINC00152组)或无关序列(si-NC组),另设未转染细胞为对照组。QPCR检测LINC00152水平,活细胞计数CCK-8法、Transwell小室和划痕实验测定细胞增殖、侵袭和迁移能力,Western blotting检测基质金属蛋白酶(MMP)-2、MMP-9和第10号染色体缺失的磷酸酶及张力蛋白同源基因(PTEN)的水平;荧光素酶报告实验验证LINC00152靶向结合miR-103a-3p的能力。结果NSCLC细胞的LINC00152水平均高于BEAS-2B细胞(P<0.05),尤其是NCI-H1975细胞的最高。si-LINC00152组的LINC00152水平为0.352±0.087,低于对照组的1.058±0.219和si-NC组的1.126±0.139(P<0.05)。与si-NC组和对照组相比,si-LINC00152组NCI-H1975细胞转染48、72 h的增殖活力下降(P<0.05);si-LINC00152组的划痕愈合率和穿膜细胞数分别为(27.386±2.428)%和(78.840±5.031)个,低于si-NC组的(77.675±4.803)%和(179.208±13.264)个及对照组的(76.371±5.385)%和(174.003±15.678)个(P<0.05);与si-NC组和对照组相比,si-LINC00152组的MMP-2和MMP-9水平均降低,而PTEN水平升高(P<0.05)。对照组和si-NC组上述指标的差异无统计学意义(P>0.05)。双荧光素酶报告分析证实,miR-103a-3p模拟物降低了野生型LINC00152的荧光素酶活性(P<0.05),但对突变型无影响(P>0.05)。结论LINC00152在NSCLC细胞中高表达并发挥促癌作用,与NSCLC的迁移侵袭密切相关,LINC00152与miR-103a-3p间的相互作用在NSCLC靶向治疗中有一定潜能。     

改良大骨瓣联合软通道微创介入逐渐减压术治疗重型颅脑损伤的疗效分析

目的：探讨改良大骨瓣联合软通道微创介入逐渐减压术治疗重型颅脑损伤的疗效。方法方便选择自2009年12月—2014年11月该院收治的重型颅脑损伤病例70例,随机分为改良组和对照组2组,每组35例,改良组施行改良大骨瓣联合软通道微创介入逐渐减压术,对照组按标准大骨瓣开颅、硬脑膜一次性全切开,对比分析两组的并发症发生率及预后。结果改良组发生迟发性颅内血肿、大面积脑梗塞及弥漫性脑肿胀等并发症9例(25.7％,9/35),预后良好者23例(65.7％,23/35),对照组发生并发症19例(54.3％,19/35),预后良好者14例(40.0％,14/35),两组并发症发生率和预后差异具有统计学意义(P<0.05)。结论改良大骨瓣联合软通道微创介入逐渐减压术治疗重型颅脑损伤,效果良好,显著降低死亡率。