豚鼠耳蜗Hensen细胞的分离、活性鉴定及其胞内静态游离Ca~(2+)分布

使用酶消化法及机械分离法对 Hensen细胞进行分离 ,置于倒置显微镜下用碘化丙啶及钙敏荧光染料 Fluo-3进行细胞活性鉴定并在激光扫描共聚焦显微镜下观察静息状态 Hensen细胞内的游离 Ca2 +的时空分布。结果证明 ,每个豚鼠耳蜗可以得到单离的 Hensen细胞 5～ 12个。细胞活性良好 ,可保持 5～ 6h。当细胞变性、坏死时可见一系列的形态学变化。对此得出几点判断 Hensen细胞活性的标准 :(1)细胞体呈卵圆形或椭圆形 ,大小可不一致 ;(2 )细胞膜完整 ,细胞边界清楚 ,折光现象明显 ;(3 )细胞浆清澈透明 ,无布朗运动 ,无溢出 ;(4 )细胞浆内的脂滴清晰可辨 ,折光现象明显 ;(5 )细胞无水肿 (即无气球样变 )。在静息状态下 ,Hensen细胞内的 Ca2 + 在细胞内分布不均匀 ,脂滴所在部位没有 Ca2 + 的分布。随时间延长 ,细胞内的 [Ca2 + ] i可小幅度振荡 ,但基本处于一种稳定状态。本工作为进一步对 Hensen细胞的其他特性进行研究打下了基础     

Morphology and Thermal Properties of MCPA6/ABS by in situ Polymerization of ε‐Caprolactam

Summary: In this work, blends of monomer casting polyamide 6 (MCPA6) and acrylonitrile‐butadiene‐styrene (ABS) were successfully prepared by in situ polymerization via the application of ε‐caprolactam as a reactive solvent. The morphology and thermal properties of MCPA6/ABS were investigated by means of wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively. The domain sizes of the ABS phase in MCPA6/ABS blends were much finer than those in corresponding polyamide 6 (PA6)/ABS blends prepared by simple melt blending. With an increased amount of ABS in MCPA6, the melt enthalpy (ΔH_f), the rate of crystallization (T_c) and the degree of crystallinity (X_c(DSC)) of MCPA6 in MCPA6/ABS blends were all decreased. The degree of supercooling (ΔT_d) showed a contrary trend. However, the melting temperatures of these blends were almost unchanged. All the results could be attributed to in situ polymerization and the hydrolysis reaction of ABS that occurred during the polymerization process. Furthermore, WAXD results showed that only α‐form crystals existed in the MCPA6/ABS blends, despite the ABS content and heat treatment.

SEM micrograph of the fractured surface of an MCPA6/ABS blend with an ABS content of 20 wt.‐% (×10 000).     

Sperm pathology: a step beyond descriptive morphology. Origin, characterization and fertility potential of abnormal sperm phenotypes in infertile men

Sperm pathology is presented as the discipline of characterizing structural and functional deficiencies in abnormal spermatozoa. This concept complements that of sperm morphology mainly concerned with the appearance of spermatozoa. These two notions collaborate in providing correlations of prognostic value with sperm fertilizing capacity, explaining the mechanisms of sperm inefficiency, suggesting strategies to improve fertilization and opening a door to molecular genetic studies. Phenotypes of genetic origin involving sperm heads, flagella and the neck region are presented describing their clinical manifestations, sperm structure, cytochemistry and genetic background. When available, animal models are used to highlight possible genetic mechanisms. Sperm pathologies secondary to andrological conditions or environmental factors are described, stressing the non-specific nature of the sperm response to noxious agents. The available literature on the prognostic value of sperm pathologies in ICSI is also reviewed. Flagellar anomalies bear a good prognosis, but those affecting the acrosome, sperm chromatin and the neck region entail an increasing chance of failure, which highlights the differential roles played by specific sperm components in fertilization, implantation and early embryonic development. A final discussion is devoted to genetic counselling and the risks involved in using immotile or abnormal spermatozoa in assisted reproduction.     

Morphological evaluation of human embryos and derivation of an embryo quality scoring system specific for day 3 embryos: a preliminary study

A scoring system specific for day 3 embryos has not been extensively explored. Most IVF laboratories continue to grade embryos solely on the basis of cell number and percentage fragmentation as was traditionally done for day 2 embryos. Additional morphological features, some unique to day 3 embryos, may be useful in selecting embryos most likely to blastulate and implant. The objective of this study was to derive an embryo scoring system for day 3 transfers which is predictive of positive pregnancy outcomes. A total of 316 transferred embryos from 93 patients was recorded on videotape and evaluated. The following parameters were used to grade the embryos: cell number, fragmentation pattern (FP), cytoplasmic pitting, compaction, equal sized blastomeres, blastomere expansion and absence of vacuoles. The clinical pregnancy rate was 41.9%, with an implantation rate of 18% per embryo transferred. The mean number of embryos transferred per patient was 3.4. Three formulae were derived to score embryo quality in each transfer based on the average score of individual embryos transferred. In the first scoring system, cell number alone was used to predict pregnancy outcome. The second scoring system was based on blastomere number and the observed FP. The third scoring system utilized both blastomere number and FP but also combined this with five morphological criteria to yield a final day 3 embryo quality (D3EQ) score. We found the D3EQ score to be prognostic of pregnancy outcome. This study suggests that although cell number and FP are certainly predictors of positive pregnancy outcomes, additional parameters specific to day 3 embryos should be used to stratify a cohort of embryos further.     

A new test for the assessment of sperm- zona pellucida penetration: relationship with results of other sperm tests and fertilization in vitro

The spermatozoa of some patients attending for in-vitro fertilization(IVF) fail to penetrate the zona pellucida in vitro. A testhas been devised to identify these cases. It is based on thenumber of spermatozoa penetrating into the zona pellucida, whichwere counted after removing spermatozoa bound to the zona surfaceby vigorous aspiration of each oocyte through a narrow gauge(120 µm) glass pipette. The oocytes were collected from197 patients undergoing IVF treatment with their own gametes;79 with no oocytes fertilized and 118 with some oocytes fertilized.Sperm motility, morphology and DNA normality (acridine orangestain) were also measured. The relationships between sperm testresults and IVF rate were examined by logistic regression. Theproportions of penetrated zonae, normal sperm morphology andnormal DNA were the most significant factors related to IVFrate in the whole group. Also, in patients with 30 spermatozoabound per zona pellucida or with normal sperm morphology 30%,the proportion of penetrated zonae and normal DNA were mostsignificant. Oocytes from 42 patients who had zero fertilizationand low sperm-zona binding (average, 2.2 spermatozoa/zona pellucida)were re-incubated with normal donor spermatozoa: large numbersof spermatozoa bound (average, 88 spermatozoa/zona pellucida)and each zona was penetrated by at least one spermatozoon. Inconclusion, the percentage of zonae penetrated was the variablemost significantly correlated with IVF rate. Penetration ofthe zona was also strongly related to fertilization rates inpatients without defects of sperm morphology and sperm-zonabinding. In patients where all zonae were penetrated, poor fertilizationmay be due to sperm morphology and DNA abnormalities. Failureof sperm-zona binding and penetration in vitro in patients withfailure of fertilization was mainly due to sperm defects andnot oocyte defects     

大鼠视皮质胼胝体轴突的生后发育和形态──生物素结合的葡聚糖胺顺行示踪法研究

采用生物素结合的葡聚糖胺顺行示踪法研究了大鼠视皮质主要胼胝体投射区即１７／１８ａ交界区胼胝体轴突的生后发育和形态。在生后５天时，此交界区胼胝体轴突从白质向灰质Ⅰ层垂直生长，在灰质内仅有极少量的侧支抽芽。至生后１３天时，皮质Ⅰ层最先出现致密的由胼胝体轴突终支组成的终末丛。到生后１７天时，类似的终末丛也见于皮质Ⅱ／Ⅲ，Ⅴ和Ⅵ层，这种分布型式与成年大鼠者相似。以上结果表明，绝大部分胼胝体轴突首先生长到达Ⅰ层并先在Ⅰ层发出终支，然后再在其它皮质层发出侧支及终支，因而提示皮质Ⅰ层在胼胝体联系的生后发育中可能发挥重要作用。     

Histopathology of gastric carcinoids: a survey of 42 cases

An unselected series of 42 gastric carcinoids has been reviewed. Clinically the tumours simulated common gastric lesions including ulcer, polyp and carcinoma. No endocrine symptoms were identified. The tumours were most frequent in the body of the stomach and in 25% in that site were multiple. Morphologically most tumours when classified according to Soga (1974) demonstrated a mixed growth pattern. Six tumours displayed an atypical morphology (type D): they were larger and metastasized more frequently than the rest of the tumours. Six tumours contained a few scattered argentaffinic cells but the others were negative indicating negligible serotonin secretion in only a few cases. The Grimelius argyrophilic reaction was positive in most cells in all tested tumours except in three, two of which showed atypical morphology (type D). It is suggested that gastric carcinoids with a type D morphology or a minority cell population of argyrophil cells are dedifferentiated carcinoids which are biologically nearer to gastric carcinomas. The most frequent clinicopathological correlation was achlorhydria linking pernicious anaemia and gastric carcinoids. This indicates pathogenetic similarities between gastric carcinoids and gastric carcinomas.     

Crystallization and Melting Behavior of Poly(3‐hydroxybutyrate)‐Based Blends

Summary: Blends of high molecular weight poly(R‐3‐hydroxybutyrate) (PHB) ( = 352 000 g · mol^?1), comprising of either low molecular weight poly(R‐3‐hydroxybutyrate) (D‐PHB) ( = 3 900 g · mol^?1) or poly[(R‐3‐hydroxybutyrate)‐co‐(R‐3‐hydroxyvalerate)] (PHBV) ( = 238 000 g · mol^?1) with 12 mol‐% hydroxyvalerate (HV) content as a second constituent, were investigated along with the thermal properties and morphologies. After isothermal crystallization, a lowering of the melting temperature of PHB can be observed with increasing content of the second component in the blends. This behavior points towards miscibility of the constituents both in the liquid and the solid state. Crystallization kinetics was studied under isothermal and non‐isothermal conditions. The overall kinetics of isothermal crystallization was analyzed in terms of the Avrami equation. Only one crystallization peak is observed in all cases for the PHB/D‐PHB and PHB/PHBV blends under the conditions studied. This demonstrates co‐crystallization of the constituents. The addition of D‐PHB or PHBV to PHB reduces the rate of crystallization of the blends compared to that of neat PHB. The corresponding activation energies of crystallization also decrease with an increasing concentration of the second constituent. Non‐isothermal crystallization, carried out with different cooling rates held constant, is discussed in terms of a quasi‐isothermal approach. The corresponding rate constants as functions of reciprocal undercooling show Arrhenius‐like behavior in a certain range of temperatures. At sufficiently high undercooling, the rate constants of crystallization for the isothermal process exceed those reflecting non‐isothermal conditions, whereas in the limit of low undercoolings, the rate constants become similar. Ring‐banded morphologies are observed when PHB is in excess. When the respective second component is the major component, fibrous textures of the spherulites develop.

Polarized micrograph of PHB/PHBV 90/10.