CT���������ۼ�״�ٲ��������������е�Ӧ���о�

目的　探讨一种更精确而行之有效的测量甲状腺残留量的方法。方法　自 1996～ 2 0 0 1年对 15例原发性甲状腺功能亢进症病人于术前经CT对甲状腺进行体积测量 ,于双侧甲状腺次全切除术后 ,再用增强CT对上述病人残留甲状腺进行体积测量 ,并与术中测得残留量比较。结果　术中测得残留量 2 8～ 13 0 g ,术后CT测量为 3 4～ 16 6g ,二者之间有一定误差 (P =0 0 6 7) ,产生原因主要为术者对残留甲状腺背面气管旁沟处的不规则腺体测量不准确。体积切除率 83 1%～ 97 9% ,体积残留率 2 1%～ 17 9% ,活体组织相对体积质量 (1 0 5 4 8± 0 0 2 0 5 ) g/cm3 ,离体组织相对体积质量 (1 0 6 4 8± 0 0 188) g/cm3 。结论　CT测量更接近实际残留量 ,可重复性强 ,可比性强。体积残留率比腺体残留重量、手术切除率更具有个性化参考意义。     

Independent component analysis and clustering improve signal-to-noise ratio for statistical analysis of event-related potentials

OBJECTIVE: To evaluate the effectiveness of a new method of using Independent Component Analysis (ICA) and k-means clustering to increase the signal-to-noise ratio of Event-Related Potential (ERP) measurements while permitting standard statistical comparisons to be made despite the inter-subject variations characteristic of ICA. METHODS: Per-subject ICA results were used to create a channel pool, with unequal weights, that could be applied consistently across subjects. Signals derived from this and other pooling schemes, and from unpooled electrodes, were subjected to identical statistical analysis of the N170 own-face effect in a Joe/No Joe face recognition paradigm wherein participants monitored for a target face (Joe) presented amongst other unfamiliar faces and their own face. Results between the Joe, unfamiliar face and own face conditions were compared using Cohen's d statistic (square root of signal-to-noise ratio) to measure effect size. RESULTS: When the own-face condition was compared to the Joe and unfamiliar-face conditions, the channel map method increased effect size by a factor ranging from 1.2 to 2.2. These results stand in contrast to previous findings, where conventional pooling schemes failed to reveal an N170 effect to the own-face stimulus (Tanaka JW, Curran T, Porterfield A, Collins D. The activation of pre-existing and acquired face representations: the N250 ERP as an index of face familiarity. J Cogn Neurosci 2006;18:1488-97). Consistent with conventional pooling schemes, the channel map approach showed no reliable differences between the Joe and Unfamiliar face conditions, yielding a decrease in effect size ranging from 0.13 to 0.75. CONCLUSIONS: By increasing the signal-to-noise ratio in the measured waveforms, the channel pool method demonstrated an enhanced sensitivity to the neurophysiological response to own-face relative to other faces. SIGNIFICANCE: By overcoming the characteristic inter-subject variations of ICA, this work allows classic ERP analysis methods to exploit the improved signal-to-noise ratio obtainable with ICA.     

Image size magnification and power and dilation factors for optical instruments in general

Traditional treatments of spectacle magnification for distant objects consider only stigmatic spectacle lenses and they compare the retinal image size in a refractively fully compensated eye with the image size in the uncompensated eye. Spectacle magnification is expressed as a product of two factors, the power and shape factors of the lens. The power factor depends on the position of the entrance pupil of the eye. For an eye with an astigmatic cornea, however, the position of the entrance pupil is not well defined. Thus, the traditional approach to spectacle magnification does not generalize properly to allow for astigmatism. Within the constraints of linear optics and subject to the restriction that the eye's iris remains the aperture stop, this paper provides a complete, unified and exact treatment for optical instruments in general. It compares retinal image size in a generalized sense (including image shape and orientation) for any instrument in front of an eye with that of the eye alone irrespective of whether the instrument compensates or not. The approach does not make use of the concept of the entrance pupil at all and it allows for astigmatism and for non-alignment of refracting elements in the instrument and in the eye. The concept of spectacle magnification generalizes to the concept of instrument size magnification. Instrument size magnification can be expressed as the product of two matrix factors one of which can be interpreted as a power factor (as back-vertex power) and the other factor for which the name dilation factor is more appropriate in general. The general treatment is then applied to a number of special cases including afocal instruments, spectacle lenses (including obliquely crossing thick bitoric lenses), contact lenses, stigmatic systems and stigmatic eyes. In the case of spectacle lenses, the dilation factor reduces to the usual shape factor.     

原料药粒径对盐酸普萘洛尔渗透泵片释药行为的影响

目的:研究原料药粒径等对盐酸普萘洛尔渗透泵片释药行为的影响。方法:取不同批号盐酸普萘洛尔及同批号重结晶前、后的原料药均按相同处方制备成渗透泵片,考察药物体外释放情况及释药24h后衣膜形态;并对上述不同原料药的粒径分别以光学显微镜和激光粒度分析仪进行证实。结果:以原料药粒径较小的渗透泵片释放完毕后衣膜变形,且不能维持零级释放,原料药粒径较大的渗透泵片结果与之相反。不同原料药经仪器证实粒径确有差异。结论:原料药的粒径可影响制备的渗透泵片的释放行为,提示性状稳定的原料药的合理选择在制剂过程中不可忽视。     

肾综合征出血热病毒气溶胶的物理稳定性实验研究

本文采用荧光素钠正常鼠脑悬液做模拟示踪物质，对肾综合征出血热病毒气溶胶在空气中的物理稳定性进行了测定，并与其生物稳定性做了比较。结果表明：病毒气溶胶的粒子大小在１ｕｍ左右，它随气溶胶的胶龄增长而减少，且其分散度变窄。初始气溶胶的物理回收率及其各胶龄的物理存留率均明显地高于它的生物回收率和生物存活率。本文还就肾综合征出血热病毒气溶胶的物理稳定性和生物稳定性，对本病空气传播的影响进行了讨论。     

Physicochemical aspects of drug release. XV. Investigation of diffusional transport in dissolution of suspended, sparingly soluble drugs

The dissolution rates of sparingly soluble, fine particulate, suspended drugs have been studied using a Coulter Counter Model TAII. For two sieve fractions of oxazepam the dissolution rates were monitored in media with varying viscosities brought about by the addition of glycerol, while for griseofulvin the change in the medium's viscosity was induced by changing the temperature. By calculating the dissolution rate, and compensating for differences in particle surface area and media solubility, it was shown that the dissolution rate was diffusion controlled. After additional normalization for the diffusion coefficient, it was suggested that the so-called apparent diffusional distance decreased substantially with particle size. The effect of particle size was more limited above approx. 15 μm.     

Mechanisms of proteinuria in nephrotic humans

The glomerular capillary wall imposes a remarkably efficient barrier to the passage of proteins the size of albumin and larger. The development of heavy proteinuria signifies impairment of the function of this barrier. Because endogenous proteins of graded size are heterogeneous with respect to their molecular charge and undergo extensive tubular reabsorption, they are not useful for quantifying the extent of barrier dysfunction. An alternative approach is to determine the fractional clearance of uncharged and non-reabsorbable polymers of graded size. When combined with a hydrodynamic theory of solute transport through a heteroporous membrane, the intrinsic properties of healthy and diseased glomerular capillary walls can be inferred. This approach reveals the nephrotic range proteinuria that attends minimal change nephropathy to be associated with impairment of both the size- and charge-selective properties of glomerular capillary walls.     

How large must an epileptic focus be to cause an electrographic status epilepticus--a case report.

Based on experimental data from animal studies different theories regarding the size of an epileptic focus have been postulated which range from single pacemaker cells to extended neuronal networks. We report a case which gives further information about the size of a human epileptic focus which can trigger manifest epileptic seizures. We report a 22-year-old man with medically refractory temporal lobe epilepsy. This patient suffered from brief complex partial seizures and frequent epigastric auras. To differentiate a mesiotemporal from a temporolateral seizure origin the patient was implanted with a 10 contact depth electrode from a posterior approach into the right hippocampus, and additional temporobasal/temporolateral subdural strip electrodes. Depth recordings revealed an electrographic status with continuous rhythmic sharp wave activity (1 Hz), the field of which was confined to a diameter of less than 1 cm in the anterior hippocampus, whereas temporobasal subdural strip electrodes did not display this activity. Periodically, spread of this activity occurred to the amygdala, to the posterior part of the hippocampus, and less often to the temporobasal cortex. Most seizure patterns remained subclinical, few of them became symptomatic as partial seizures. This case demonstrates that a hippocampal epileptic focus causing electrographic focal status epilepticus may be limited to a volume of less than 1 cm in diameter. This observation is discussed with regard to implantation strategies and to possible superselective resective or modulatory approaches in the treatment of such limited epileptogenic areas.     

33 factorial design-based optimization of the formulation of nitrofurantoin microcapsules

A microcapsule form of nitrofurantoin was prepared by a simple coacervation method with carboxymethylcellulose and aluminium sulfate. 3³ factorial design was performed for three independent variables, namely, the particle size of the drug, the size of the microcapsules and the pH of the dissolution medium. The dissolution tests with the formulated microcapsules were carried out according to the United States Pharmacopeia XXII rotating basket method at pH 1.2, 5 and 7.5, which represent the pH of gastrointestinal fluids. Release data were examined kinetically and the ideal kinetic models were estimated and t _63.2 values obtained from RRSBW distribution were used in the factorial design experiment. The influence of the independent variables on the dissolution of nitrofurantoin microcapsules could be expressed as the pH of the dissolution medium > particle size of the microcapsule > particle size of nitrofurantoin. The other aim of this study was to evaluate microcapsule formulation in terms of the United States Pharmacopeia criteria with a minimum of experiments. Our findings suggest that dosage forms which comply with the pharmacopoeia criteria for dissolution can be prepared and selected by factorial design.     

Comparison of Output Particle Size Distributions from Pressurized Aerosols Formulated as Solutions or Suspensions

The delivery of particles as small as possible (preferably <5 µm) to the respiratory tract should be the aim of those formulating metered dose inhalers (MDIs). This may be facilitated by the formulation of solution, rather than suspension-type, pressurized aerosol units. Two series of MDIs were compared; one contained suspended micronized disodium fluorescein (0.1%, w/v), while the other contained the same concentration of dissolved salicylic acid. Either oleic acid, L--phosphatidylcholine, or sorbitan trioleate was incorporated at 0.15% (w/v) as suspending agent (disodium fluorescein) or solubilizing agent (salicylic acid). The propellant blend was 70% (w/w) Freon 12 and 30% (w/w) Freon 11 in all cases. This exhibited a vapor pressure of 50.6 psig (444.7 kPa) at 21°C. The output particle size distribution of the aerosol reaching the cascade impactor showed a mass median aerodynamic diameter (MMAD) of approximately 4 and 2 µm for the suspension and solution formulations respectively, regardless of the surfactant used. Larger MMADs were observed for solution aerosols formulated with oleic acid (2.32 µm) compared to those containing L--phosphatidylcholine (1.93 µm) or sorbitan trioleate (2.07 µm). Possible reasons for these observations are discussed.