3D打印导航模板辅助椎弓根螺钉在脊柱侧弯矫形术中的置钉效果

目的:探讨3D打印导航模板辅助椎弓根螺钉在脊柱侧弯矫形术中的置钉效果。方法:回顾性分析2018年1月至2020年6月间采用椎弓根螺钉置钉法治疗的39例脊柱侧弯患者的病例资料,其中采用3D打印导航模板辅助置钉(3D组)18例,常规徒手置钉方法置钉(徒手组)21例。记录并比较2组的置钉时间、置钉出血量、置钉透视次数、置钉等级及准确率、置钉可接受率、置钉并发症和主弯矫形率。采用SPSS 19.0软件进行统计学分析。结果:39例患者均顺利完成术中置钉,术后徒手组4例出现并发症,治疗后症状消失,3D组无相关并发症出现。3D组的置钉时间、置钉出血量、置钉透视次数少于徒手组,置钉等级及准确率、置钉可接受率均优于徒手组,差异有统计学意义(P<0.05);3D组和徒手组主弯矫形率比较差异无统计学意义(P>0.05)。结论:在脊柱侧弯矫形术中采用3D打印导航模板辅助椎弓根螺钉置钉,可显著降低置钉难度、优化术中置钉操作、提升置钉效果,是一种较好的置钉方法。     

3D打印导板辅助上颈椎椎弓根置钉与徒手置钉的比较

目的 比较个体化3D打印导板辅助上颈椎椎弓根置钉与徒手置钉的精准性。方法 选择2019年6月至2022年6月在蚌埠医学院第二附属医院就诊的上颈椎疾患患者20例,获取每位患者颈椎三维CT数据,根据置钉方式不同分为导板组和对照组,分别制作20例等比例3D打印上颈椎模型,导板组使用3D打印导板辅助上颈椎模型椎弓根螺钉置入,对照组在透视辅助下徒手置钉。根据椎体是否存在骨折,将导板组内20例模型分为钉道损伤组10例（寰椎骨折与枢椎骨折病例）和钉道完整组10例（畸形与关节脱位病例）。比较导板组和对照组螺钉可接受率、单枚螺钉置入时间差异;比较导板组术前理想钉道与术后实际钉道内倾角差异,对比钉道损伤组和钉道完整组置钉结果差异。结果 导板组螺钉可接受率为93.55%,高于对照组的79.03%(P<0.05);导板组单枚螺钉置入时间短于对照组（P<0.05）;导板组术前理想螺钉内倾角与术后实际螺钉内倾角之间差异无统计学意义（P>0.05）;钉道损伤组螺钉突破椎弓根率26.7%高于钉道完整组3.1%(P<0.05)。结论 个体化3D打印导板辅助上颈椎椎弓根置钉在置钉精准度、安全性和置...     

引导组织再生术屏障膜放置时间的研究

在 ３０ 只成年兔的下颌两切牙唇侧牙槽骨制备 １０ｍ ｍ ×５ｍ ｍ 的开窗骨缺损,其表面覆盖 Ｇｏｒｅ Ｔｅｘ 膜。该膜分别于术后 １、２、３、５ 周取出,以不放膜组为空白对照。所有动物５ 周处死,标本作组织学分析。结果表明,２ 周取膜组较空白对照组有更多的新骨形成,而 ３ 周或 ５ 周取膜组织的再生量无进一步增加。提示在引导兔开窗骨缺损的牙周再生中,屏障膜放置所需要的最适宜时间是 ２ 周。     

壳聚糖作为牙周引导性组织再生屏障膜的实验研究

目的制备壳聚糖屏障膜,观察其微观结构,并观察在体外培养条件下壳聚糖膜对牙周膜细胞增殖的影响。方法采用相分离法制备壳聚糖膜,利用扫描电镜观察微观结构,MTT法评价壳聚糖膜对牙周膜细胞体外增殖的影响。结果于-5℃将20g/L的壳聚糖液冷冻干燥可制备出孔隙率>90%,孔隙直径介于50μm与100μm之间的壳聚糖膜,这种壳聚糖膜具有促进牙周膜细胞体外增殖的效应。结论壳聚糖膜适合作为引导性组织再生屏障膜。     

引导组织再生术促进牙槽骨再生的临床研究

目的观察引导组织再生术(guided tissue regeneragion,GTR)和Bio-plant HTR骨粉植骨术促进Ⅱ度根分叉病变患者牙糟骨再生的作用.方法使用Biomesh膜和 Bio-plant HTR骨粉对18例Ⅱ度根分叉病变行GTR手术和植骨术,手术前和手术后半年检查牙周袋深度、临床附着水平,摄数字化X光根尖片.结果术后半年18颗患牙牙周袋深度较术前明显变浅、附着水平明显增加(P＜0.01),术后半年的数字化X光根尖片与术前对比可见根分叉处暗影变小,牙槽骨密度明显增加,示有新骨形成.结论该方法对Ⅱ度根分叉病变有良好临床疗效.     

室性早搏的快速检测方法

提出一种利用相关性和RR间期比相结合的快速室性早搏的检测算法.该算法具有一定的病人自适应性.通过MIT-BIH心律失常数据库的验证,该方法对Normal和PVC有很高的识别率.     

Iris recognition based on key image feature extraction

In iris recognition, feature extraction can be influenced by factors such as illumination and contrast, and thus the features extracted may be unreliable, which can cause a high rate of false results in iris pattern recognition. In order to obtain stable features, an algorithm was proposed in this paper to extract key features of a pattern from multiple images. The proposed algorithm built an iris feature template by extracting key features and performed iris identity enrolment. Simulation results showed that the selected key features have high recognition accuracy on the CASIA Iris Set, where both contrast and illumination variance exist.     

Influence of bone marrow on membrane-guided bone regeneration of segmental long-bone defects in rabbits

Defects 10 mm long were created in long bone in the diaphysis of both radii of 18 rabbits (test and control side). On the test side, ingrowth of bone marrow into the defects was hindered or delayed by: plugging the opening of the cut bone ends with gutta-percha points (n = 7); plugging with Gelfoam (n = 6); or by removing the bone marrow by flushing with saline (n = 5). The defects on both test and control side were covered with an expanded polytetrafluoroethylene membrane, shaped as a tube. Healing was followed with radiographs for four to five months, after which the animals were killed and ground sections of the areas of the defects were prepared for histological examination. On the control side, nine of 18 animals had complete osseous bridging of the defect, and a small transverse non-mineralised zone remained in the centre of the healed defect in the other animals. This zone consisted of loose connective and cartilagenous tissue as well as connective tissue obviously derived from the outside of the membrane. By preventing or delaying the ingrowth of bone marrow we retarded the regeneration of mineralised bone, particularly in the gutta-percha and flushed bone marrow groups. The principle of guided tissue regeneration may be used to achieve regeneration of extensive long-bone defects. Any attempts to delay or prevent bone marrow ingrowth into the defects did retard regeneration of segmental long-bone defects.     

Assessment of the Fundamental Flexural Guided Wave in Cortical Bone by an Ultrasonic Axial-Transmission Array Transducer

The fundamental flexural guided wave (FFGW), as modeled, for example, by the A0 Lamb mode, is a clinically useful indicator of cortical bone thickness. In the work described in this article, we tested so-called multiridge-based analysis, based on the crazy climber algorithm and short-time Fourier transform, for assessment of the FFGW component recorded by a clinical array transducer featuring a limited number of elements. Methods included numerical finite-element simulations and experiments in bone phantoms and human radius specimens (n = 41). The proposed approach enabled extraction of the FFGW component and determination of its group velocity. This group velocity was in good agreement with theoretical predictions and possessed reasonable sensitivity to cortical width (r² = 0.51, p < 0.001) in the in vitro experiments. It is expected that the proposed approach enables related clinical application. Further work is still needed to analyze in more detail the challenges related to the impact of the overlying soft tissue.