Oral Everolimus for Treatment of a Giant Left Ventricular Rhabdomyoma in a Neonate—Rapid Tumor Regression Documented by Real Time 3D Echocardiography

The presented case reports on successful treatment with everolimus in a neonate with left ventricular giant rhabdomyoma. The authors used a different dosage regime compared to literature and documented rapid tumor regression by 3D echocardiography.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

彩色多普勒血流显像(CDFI)评价胎儿生长发育状况

目的阐明CDFI对评价胎儿宫内状况的可行性。方法200例经普通B超检查的胎儿,按测量各项常规指标的数值分为正常组100例和异常组100例,再分析经CDFI检查,所测定的指标包括胎儿大脑中动脉、肾动脉、胎盘床动脉、脐动脉血流搏动指数(PI)、阻力指数(RI)及脐动脉的收缩与舒张期峰值速率之比(S/D)。对其结果做详细记录,并进行统计学分析。结果正常组100例,经CDFI检查亦正常;胎儿出生时体重在2500g以上,新生儿发育正常。另100例异常组经CDFI检查各项指标中,54例正常,46例异常;胎儿出生时体重均小于2500g,其中54例新生儿虽体重较正常儿偏小,但发育正常;另46例胎儿宫内窘迫,导致导常分娩、新生儿生存率低。结论彩色多普勒血流显像对了解胎儿宫内情况有着重要的作用,是产科检查监护中不可缺少的部分。     

胃食管反流病与功能磁共振技术

随着对胃食管反流病研究的深入,大脑和食管感觉及胃排空的相互作用越来越受到重视,功能磁共振成像技术,有助于进一步了解胃食管反流病的发病机制。     

超顺磁性氧化铁标记大鼠骨髓基质细胞经门静脉移植MRI活体示踪的研究

目的观察1．5T场强MRI联合动物专用线圈是否可以活体示踪经门静脉移植的纳米级超顺磁性氧化铁颗粒标记的骨髓基质细胞（bone marrow stromal cells BMSCs），为介人性门静脉骨髓基质细胞移植治疗终末期肝脏疾病的研究提供进一步的依据。方法供体大鼠5只，梯度密度离心分离BMSCs，纳米级超顺磁性氧化铁颗粒和脂质体转染BMSCs，体外经普鲁士蓝染色和HE染色确定细胞标记率。受体大鼠15只，分为5组，分别为对照组和纳米级超顺磁性氧化铁颗粒标记的骨髓基质细胞经门静脉移植人正常大鼠肝脏后2h、3d、7d及2周组。1．5T场强MRI联合动物专用线圈行T1W、T2W和T2＊序列扫描，观察肝脏信号改变情况，与对照组比较，并且与组织切片对照。结果纳米级超顺磁性氧化铁颗粒和脂质体转染BMSCs，细胞标记率〉95％。经门静脉移植人正常大鼠肝脏后，T2＊序列扫描显示经标记的BMSCs在肝内显示弥漫性的结节性低信号影，移植后2h到2周均可见到细胞在受体肝脏内存在，组织学切片显示信号缺失部位与铁颗粒标记细胞相一致。结论纳米级超顺磁性铁氧体颗粒标记的大鼠BMSCs经门静脉移植后可以通过1、5T场强行MRI活体示踪，为临床干细胞移植的应用提供可行的示踪方法。     

Continuously moving table 3D MRI with lateral frequency-encoding direction.

A method is presented for 3D MRI in an extended field of view (FOV) based on continuous motion of the patient table and an efficient acquisition scheme. A gradient-echo MR pulse sequence is applied with lateral (left-right (L/R)) frequency-encoding direction and slab selection along the direction of motion. Compensation for the table motion is achieved by a combination of slab tracking and data alignment in hybrid space. The method allows fast k-space coverage to be achieved, especially when a short sampling FOV is chosen along the direction of table motion, as is desirable for good image quality. The method can be incorporated into different acquisitions schemes, including segmented k-space scanning, which allows for contrast variation with the use of magnetization preparation. Head-to-toe images of volunteers were obtained with good quality using 3D spoiled gradient-echo sequences. As an example of magnetization-prepared imaging, fat/water separated images were acquired using chemical shift selective (CHESS) presaturation pulses.     

Fast CT-PRESS-based spiral chemical shift imaging at 3 Tesla.

A new sequence is presented that combines constant-time point-resolved spectroscopy (CT-PRESS) with fast spiral chemical shift imaging. It allows the acquisition of multivoxel spectra without line splitting with a minimum total measurement time of less than 5 min for a field of view of 24 cm and a nominal 1.5x1.5-cm2 in-plane resolution. Measurements were performed with 17 CS encoding steps in t1 (Deltat1=12.8 ms) and an average echo time of 151 ms, which was determined by simulating the CT-PRESS experiment for the spin systems of glutamate (Glu) and myo-inositol (mI). Signals from N-acetyl-aspartate, total creatine, choline-containing compounds (Cho), Glu, and mI were detected in a healthy volunteer with no or only minor baseline distortions within 14 min on a 3 T MR scanner.     

1 H-MRS对低级别和高级别脑胶质瘤鉴别诊断的作用及病理级别相关性的研究

目的 分析脑胶质瘤的氢质子磁共振波谱（proton magnetic resonance spectroscopy，^1H—MRS）表现及其临床意义；探讨脑胶质瘤的^1H—MRS特点与其病理级别相关性。资料与方法 搜集经临床手术、病理证实的脑胶质瘤36例，按照WHO诊断标准分成两组：低级别脑胶质瘤组、高级别脑胶质瘤组。所有患者在术前行^1H—MRS检查。均在MR非增强成像的基础上获得。使用Siemens Sonata 1．5T超导磁共振扫描仪，多体素扫描，点分辨表面线圈法，检测不同区域代谢物变化。结果 脑胶质瘤的^1H—MRS表现：肌酸（Cr）轻度下降，N-乙酰天门冬氨酸（NAA）显著下降。胆碱（Cho）显著增高。低级别、高级别脑胶质瘤的肿瘤组织分别和对侧正常脑组织的NAA／Cr、Cho／Cr、NAA／Cho比值存在非常显著性差异（P〈0．01）；低级别脑胶质瘤和高级别脑胶质瘤的肿瘤组织的NAA／Cr、Cho／Cr、NAA／Cho比值存在显著性差异（P〈0．05）。脑胶质瘤的NAA／Cho、Cho／Cr、NAA／Cr比值与病理级别相关，其中NAA／Cho和Cho／cr比值反映肿瘤级别较稳定；NAA／Cr、NAA／Cho比值存在负相关关系（相关系数rs分别为-0．663，-0．851），Cho／Cr比值存在正相关关系（相关系数rs为0．858）。结论 ^1H—MRS与MRI相结合能提高脑胶质瘤术前诊断的准确性。^1H-MRS可评价脑胶质瘤的分级，反映脑胶质瘤代谢特性以及肿瘤生长潜能。     

脑静脉畸形的MRI表现及其诊断价值

目的 探讨脑静脉畸形的MRI表现，评价各成像序列的诊断价值。资料与方法 搜集经临床手术证实的脑静脉畸形8例进行回顾性分析，所有患者均进行了常规MRI平扫及3D-MOTSA MRA检查。6例行Gd-DTPA增强T1WI，其中3例行3D-MOTSA增强MRA检查。结果 小脑4例，额叶、顶叶、枕叶共4例。5例MRI平扫引流静脉为长T1短T2流空信号，3例呈长T1低信号、长T2高信号。扩张的髓静脉为网状及条状长T1低信号、长T2高信号，增强扫描呈“海蛇头”样改变，即多条髓静脉呈辐射状汇入粗大的引流静脉。3D-MOTSA MRA检查显示部分引流静脉，髓静脉显示较少。3D-MOTSA增强MRA检查引流静脉全程显示，髓静脉显示数目多。结论 MRI能明确诊断脑静脉畸形的合并症，弥补脑血管造影的不足，3D-MOTSA增强MRA检查可取代脑血管造影。     

胚胎发育不良性神经上皮瘤的影像学与临床病理特征

目的探讨胚胎发育不良性神经上皮瘤（DNT）的MRI、CT表现及临床病理特征。方法回顾性分析经组织病理学证实的12例DNT的MRI、CT表现与临床病理特点。结果男6例，女6例，年龄12～68岁（平均36．7岁）。大多数病例以癫痫小发作为主，神经系统检查无阳性体征。MR检查病变均位于幕上结构，累及皮层，额叶（4例）及颞叶（3例）为主；最大径2-5cm不等，形态呈类圆形、分叶状或不规则状；2例累及白质，7例伴囊性变。病变在MRI均呈T1WI低信号，T2WI高信号，无病变周围水肿及占位效应；囊性病变在T1WI信号均匀，等于或略高于脑脊液。6例CT扫描病变均呈低密度改变，其中2例呈囊性分叶状，1例呈局灶性钙化；4例增强后病变无强化，1例病变内呈轻度不均匀强化。病理组织学DNT分为3型：单纯型（4例）、复杂型（6例）及非特异型（2例）。结论DNT是一种良性病变，MRI较CT更具特征性表现。