多层螺旋CT定量评估慢性阻塞性肺疾病病情的价值

目的探讨多层螺旋CT(MSCT)定量评估慢性阻塞性肺疾病病情的价值。方法选取2017年8月～2018年7月在湖州市第一人民医院就诊的73例慢性阻塞性肺疾病(COPD)患者作为研究对象,按照病情轻重分为Ⅰ组(轻度患者17例)、Ⅱ组(中度患者32例)、Ⅲ组(重度患者24例),并选取同期于该院体检的健康者20例为对照组。所有研究对象均行MSCT低剂量扫描,观察比较各组管腔面积(Ai)、支气管壁面积百分比(WA%)、管壁厚度与体表面积比值(T/BSA)、壁厚度与直径比值(TDR),同时予以肺功能检查,采用定量CT气道分析软件分别测量气道相关参数,并用Siemens Pulmo软件Pearson定量分析其相关性。结果对照组、Ⅰ组、Ⅱ组、Ⅲ组的FEV1均呈逐渐下降趋势,FEV1/FVC呈逐渐上升趋势,差异均有统计学意义(P0.05)。对照组、Ⅰ组、Ⅱ组、Ⅲ组的WA%、T/BSA、TDR比较,均呈逐渐上升趋势,Ai呈下降趋势,差异均有统计学意义(P0.05)。FEV1与WA%、TDR之间呈负相关(r=-0.291,P=0.000;r=-0.473,P=0.000),FEV1/FVC与WA%、TDR之间呈正相关(r=0.285,P=0.000;r=0.472,P=0.000)。结论 MSCT扫描及定量分析可为COPD患者气道病变情况提供可靠的评估信息。     

Analysis of radiation exposure data from common radiological procedures in Dutch hospitals

IntroductionIn the Netherlands, Diagnostic Reference Levels (DRLs) have not been based on a national survey as proposed by ICRP. Instead, local exposure data, expert judgment and the international scientific literature were used as sources. This study investigated whether the current DRLs are reasonable for Dutch radiological practice.MethodsA national project was set up, in which radiography students carried out dose measurements in hospitals supervised by medical physicists. The project ran from 2014 to 2017 and dose values were analysed for a trend over time. In the absence of such a trend, the joint yearly data sets were considered a single data set and were analysed together. In this way the national project mimicked a national survey.ResultsFor six out of eleven radiological procedures enough data was collected for further analysis. In the first step of the analysis no trend was found over time for any of these procedures. In the second step the joint analysis lead to suggestions for five new DRL values that are far below the current ones. The new DRLs are based on the 75 percentile values of the distributions of all dose data per procedure.ConclusionThe results show that the current DRLs are too high for five of the six procedures that have been analysed. For the other five procedures more data needs to be collected. Moreover, the mean weights of the patients are higher than expected. This introduces bias when these are not recorded and the mean weight is assumed to be 77 kg.Implications for practiceThe current checking of doses for compliance with the DRLs needs to be changed. Both the procedure (regarding weights) and the values of the DRLs should be updated.     

膀胱癌的~(18)F-FDG PETCT显像诊断价值研究

目的研究~(18)F-FDG PETCT显像对膀胱癌的诊断价值。方法选取我院核医学科2013年3月-2015年2月收治的34例可疑膀胱癌患者,术前分别采用增强CT和~(18)F-FDG PETCT显像进行诊断,通过参考手术病理结果回顾性分析~(18)F-FDG PETCT显像诊断的效果。结果该34例经手术病理观察均确诊为移行细胞癌,增强CT、~(18)F-FDG PETCT显像诊断准确度分别为91.18%、94.12%,差异无统计学意义(P0.05);术中共有11例膀胱肿瘤出现盆腔淋巴结或邻近组织转移、浸润,~(18)F-FDG PETCT显像诊断准确度为72.73%,明显高于增强CT(27.27%),具有统计学意义(P0.05)。结论 ~(18)F-FDG PETCT显像和增强CT均是临床诊断膀胱癌的有效方法,但~(18)F-FDG PETCT显像在观察膀胱肿瘤病灶的转移和对邻近组织的浸润效果较好,对指导临床诊断和了解肿瘤病变具有重要参考价值。     

The management of emergency hospital visits for inflammatory bowel diseases: A French national expert consensus report

BackgroundManagement of inflammatory bowel diseases (IBD) in the emergency department is often suboptimal.AimsTo develop a national consensus checklist of indicators to facilitate decision-making in emergency departments concerning hospitalisation and referral for abdominopelvic computed tomography (CT).MethodsA Delphi survey was used to obtain consensus on a checklist of clinical and biological variables. 119 healthcare professionals experienced in treating IBD were invited to participate. Panellists were provided with a literature survey and invited to agree or disagree with items on a prototype checklist. Two successive rounds of voting were organised.ResultsThe prototype checklist included fifteen clinical or laboratory indicators for hospitalisation or CT. Four indicators were not retained in the Delphi process and four additional indicators added. The final indicators retained were: abdominal signs/symptoms of disease exacerbation, intravenous morphine titration, fever, vomiting, dehydration, recent intestinal surgery, ano-perineal abscess, bowel obstruction, haemodynamic instability, anaemia, acute kidney failure and elevated C-reactive protein. Consensus for the retained indicators was >88%.ConclusionsUse of this consensus checklist for the management of IBD in the emergency department may help improve standards of care and thus reduce the burden of these diseases.     

肺癌早期诊断方法的研究进展

目的 肺癌是全球发病率及死亡率最高的恶性肿瘤，患者5年生存率仍低于20%，提高早期诊断及筛查至关重要，本文对肺癌早期诊断方法进行文献综述。方法 检索PubMed、知网、万方、维普等数据库，选择与肺癌筛查相关的文献，进一步选择如CT、核磁共振、MiRNA、自身抗体等文献，提炼其相关结果结论。结果 肺癌早期诊断方法较多，每一种诊断方法均有其优缺点。结论 目前尚无任何一种技术被证实能独立完成早期肺癌的筛查，需要将目前早期诊断技术加以优化组合，以提高早期肺癌的诊断率。     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

肝退变结节的病理学改变及CT、MRI表现

肝细胞肝癌及胆管细胞癌均可在退变结节的基础上发展形成，因此及早、准确的诊断肝退变结节具有积极的临床意义。本文通过分析肝退变结节的CT、MRI表现及病理学改变，以期提高对肝退变结节的诊断水平。     

症状性大脑中动脉缺血患者脑血管储备能力的CT灌注成像研究

目的采用5％CO2吸入CT灌注成像研究症状性大脑中动脉（MCA）缺血患者MCA分布区脑血管储备能力。资料与方法临床诊断为症状性MCA缺血且无心、肺疾病患者20例，基础态CT灌注成像TTP参数图显示有MCA供血区TTP延长。首先进行常规脑灌注CT检查（基础态）；20min后，面罩吸入5％CO2，持续吸入2min后再次行脑灌注CT检查（激发态）。感兴趣层面选择基底节层面和放射冠层面，层厚10mm。计算机后处理获得脑血流量（CBF）参数图后，于MCA分布区皮层多点手绘感兴趣区，分别计算双侧皮层CBF，计算双侧CBF变化率r=（CBF激发态-CBF基础态）／CBF基础态×100％；比较双侧激发后CBF改变，分析患侧MCA分布区脑血管储备能力。结果患侧MCA分布区皮层CBF明显低于健侧。健侧MCA分布区基础态和激发态CBF可见不同程度的改变：升高17例，降低3例。对17例激发后升高的患者进行分析，根据计算将患侧CO：激发反应分为：Ⅰ型，激发后CBF升高；Ⅱ型，激发后CBF变化不明显；Ⅲ型，激发后CBF降低。结论5％CO2吸入CT灌注成像激发试验可以评估脑血管储备能力，具有重要的临床价值。     

CT对肾结核的诊断意义探讨

目的探讨肾结核的CT表现，分析CT检查在肾结核诊断中的意义。方法对42例肾结核患者进行CT检查及增强扫描并结合其他临床资料作综合分析。结果CT检查肾内有低密度病灶，空洞形成，多发空洞有特征性改变。结论肾结核的CT表现有一定的特征性，CT检查优于其他方法，在肾结核的诊断中有重要意义。