转化生长因子β1对人牙髓细胞微丝骨架的重组作用

目的:了解转化生长因子β1(TGF-β1)对人牙髓细胞微丝和微管骨架的作用。方法:I型胶原酶消化组织块法体外培养人牙髓细胞,以20ng/ml的TGF-β1处理细胞,分别在第30min、1、6和24h收集细胞爬片,BODYPY-Phalloidin对微丝作直接荧光染色、Rhodamine RedTM对微管蛋白α(tubulin-α)作间接免疫荧光染色,采用激光扫描共聚焦显微镜观察TGF-β1作用于牙髓细胞后不同时间点微丝和微管的变化情况。结果:TGF-β1作用于人牙髓细胞后,微丝出现解聚重组现象,在30min时间点,肌动蛋白(actin)在细胞膜下聚合成纤维形肌动蛋白F-actin,同时胞质内的F-actin解聚,6h解聚最明显,24h后可见胞质内微丝重组。观察的各时间点,微管结构未见明显解聚重组现象。结论:TGF-β1能够使牙髓细胞微丝骨架重组。     

聚酰亚胺纳米杂化材料的制备、结构和性能

介绍了聚酰亚胺（PI）纳米杂化材料的四种制备方法：溶胶－凝胶法、插层法、分散法、相转移分散聚合法。纳米粒子在PI材料中分散性良好。由于纳米粒子本身 性和纳米粒子改变了PI材料的应力作用点，随着SiO2,AIN等纳米粒子含量增加，PI杂化的玻璃化温度、热分解湿度、拉伸强度、断裂伸长率、杨式模量、密度增加，线性膨胀系数减少。对介电性能的影响因不同纳米材料而异。     

FRACTURE OF ABUTMENT SCREW SUPPORTING A CEMENTED IMPLANT-RETAINED PROSTHESIS WITH EXTERNAL HEXAGON CONNECTION: A CASE REPORT WITH SEM EVALUATION

One of the causes of implant failures in cemented implant-retained prostheses is the fracture of abutment screw or UCLA abutment. This article reports a case of simultaneous fracture of two UCLA abutments screws occurring in an implant-supported prosthesis placed in the mandibular molar region. The fractured structures were examined under scanning electron microscopy to investigate the probable causes of the failure, which were not related to failures on materials or fabrication of the screws, but rather were due to shear forces. The misfit in cemented prostheses may be the most likely cause of shear force generation.     

安徽省学生近20年常见病患病情况分析

目的了解安徽省学生视力低下、龋齿、贫血的患病状况及变化趋势,为开展学生常见病防治工作提供参考。方法对1985,1995,2000,2005年4个不同时期安徽省学生体质健康调研资料7～22岁学生视力低下、龋齿、贫血等常见病的患病状况进行分析。结果20a间,学生贫血患病率明显下降,从1985年的55.5%下降到2005年的5.3%;龋患率1985年至2000年明显上升,从32.1%上升到42.6%,2000年以后呈下降趋势,达18.8%;近视率逐年上升并居高不下,从1985年的23.0%上升到2005年的55.2%,尤其是高中生和大学生,高达70%～80%。结论通过开展学生常见病防治工作,学生贫血患病率和龋患率明显下降,但学生近视率逐年上升并居高不下,应引起有关部门的重视。     

Dentition planning with image-based occlusion analysis

Purpose To develop an easy-to-use, dentition planning method which is based on three-dimensional (3D) computer planning technology to replace conventional plaster-cast occlusion planning techniques. Methods The optimal dental occlusion is defined according to the condition of centric occlusion, i.e. after bringing occlusal surfaces of mandibular and opposing maxillary arches into identical 3D position. This identical position of occlusal surfaces represents the common reference frame for the 3D manipulation of all graphical elements. The planning procedure involves the following steps: (1) the optimal occlusal surface is approximated as triangle and localized both on the maxilla and mandible; (2) the original volumetric model is resampled according to the occlusal orientations; (3) the program reads in the models of ideal upper and lower dental arches from files, reshapes those to the patient anatomy and visualizes the local alignment on separate panels for mesiodistal and faciolingual inclinations. The final goal of the proposed method is to combine the requirements of functional and aesthetic designs and create an input for orthodontics, implantology and maxillofacial surgery. Results In the present study the optimal dental occlusion is created by image resampling after bringing the occlusal surfaces of mandibular and opposing maxillary arches into identical 3D position. This identical position of occlusal surfaces represents the common reference frame for manipulation of all graphical elements. Conclusions The proposed graphical environment was able to fit the elements of the ideal dentition curve to patient computed tomography under predefined centric occlusion. Rotation and scaling transformations of teeth were possible in the reformatted volumetric views about any of the axes of the teeth’s own reference space.     

超声洁治和局部用甲硝唑治疗轻、中度种植体周围炎

目的：评价用碳纤维工作头的超声洁牙机和25％甲硝唑凝胶治疗种植体周围炎的疗效。方法：将27颗患轻中度种植体周围炎的种植牙随机分为洁牙机治疗组和甲硝唑治疗组，在基线、1、2、6和12周时检查种植体的临床和生物学指标。结果： 两种治疗方法均可使菌斑指数、龈沟出血指数、龋下微生物的酶活性检查等指标改善。治疗期间未发现任何不良反应。结论；碳纤维头超声洁治和局部用25％甲硝唑凝胶是治疗牙种植体周围炎的安全有效的方法。     

改良小儿胸腔镜心脏手术股动静脉插管材料的血液相容性及毒理学研究

目的 通过对改良小儿胸腔镜心脏手术股动静脉插管材料进行血液相容性及毒理学研究,评价其临床应用的可行性.方法 分别进行溶血实验、皮内刺激实验及小鼠全身急性毒性实验,通过测定吸光度值计算溶血率,按照标准制备的材料浸提液注射到兔的皮下和小鼠体内,观察72h兔皮肤病理变化及小鼠的全身反应.结果 改良小儿胸腔镜心脏手术股动静脉插管材料溶血率为1.58%,低于国际标准(5%);实验组兔皮肤无红斑、水肿及坏死;实验组小鼠无死亡、体重下降及明显全身异常反应.结论 所用材料符合医用材料的要求,可用于临床.     

苯胺衍生物掺杂的PMMA薄膜的二次非线性光学性能的稳定性研究

具有A-π-D电子结构的苯胺衍生物掺杂的玻璃态高聚物PMMA的有机薄膜经极化取向后显示很强的二次非线性光学性能,其取向弛豫是实用化的一个有待解决的重要问题。木文通过几种苯胺衍生物以不同百分比与PMMA掺杂,用紫外-可见吸收光谱、二次谐波强度测量、动态力学粘弹谱等方法进行了取向弛豫的机理研究,结果表明分子尺寸和形状以及偶极矩的大小对取向弛豫有显著影响。     

超细α-FeOOH制备过程研究 Ⅰ.制备工艺

以制备晶形、粒度、轴比等满足高性能磁粉要求的铁黄为目标,研究了碱法超细α-FeOOH合成的工艺配方和工艺条件对粒子性能的影响,包括碱比、气量、转速、Fe(OH)_2结晶条件、熟化时间等工艺参数的影响规律。重复稳定地制备出三类超微粒α-FeOOH粒子,其粒度分别为0.18、0.28、0.39μm,分布均匀,无枝叉。     

Polylactic acid (PLA) root replica in ridge maintenance after loss of a vertically fractured incisor

Abstract A periodontally affected tooth was prepared for a special treatment: Calcium hydroxide was introduced into the apical half of the root canal whereas its cervical part was filled with glass ionomer cement. The tooth was shortened subgingivally. After 6 weeks of epithelization over the residual root a palatal full-thickness flap was mobilized. The root was carefully extracted and chairside copy-milled from the biodegradable polylactic acid (PLA) material. The PLA-replica was implanted immediately into the socket and the flap was sutured. Aim of the treatment was to prevent the ridge collapse of the extraction area. Ridge height could be preserved during the 21 months of observation. With time the radiographic density of the cancellous bone increased in the implanted area, indicating that a PLA-replica is replaced by host's bone tissue.