膀胱肿瘤切除术后尿路感染病原学和危险因素

目的观察膀胱肿瘤切除术后患者尿路感染发生情况与病原学特征,分析诱发尿路感染的危险因素,并提出合理且具备针对性的冲洗对策,为未来膀胱肿瘤切除术后尿路感染的预防提供合理参考。方法回顾性分析连云港市第一人民医院2016年1月-2019年1月接受经尿道膀胱肿瘤切除术治疗的451例膀胱肿瘤患者的临床资料,收集患者病例资料,全部患者术后均定期取尿液标本进行细菌培养,参照相关标准判定患者尿路感染情况,记录患者一般情况,包括一般人口学资料(性别、年龄、体质量、受教育程度等),同时记录患者糖尿病的疾病合并情况,将术后尿路感染可能的危险因素纳入初步分析,Logistic多因素回归分析膀胱肿瘤切除术后发生尿路感染的危险因素。结果451例膀胱肿瘤切除术患者术后第3天尿液中细菌培养阳性例数为80例,阳性率为17.74%,在使用抗菌药物后,患者尿液中细菌培养阳性率逐渐降低,各时点尿液细菌阳性培养率比较,差异有统计学意义(P<0.05);经多因素Logistic回归分析检验证实,高龄、血糖水平控制不佳、术前留置导尿管、多发肿瘤是膀胱肿瘤切除术后尿路感染的危险因素(OR>1,P<0.05);80例术后尿液细菌培养阳性患者共分离出87株菌株,其中革兰阴性菌66株占75.86%,革兰阳性球菌21株占24.14%。结论膀胱肿瘤切除术后患者有较高的尿路感染风险,革兰阴性菌是主要的感染病原菌,年龄、基础疾病、肿瘤位点、术前导尿管留置等是影响因素,这类患者应引起临床高度重视。     

Association Study of Matrix Metalloproteinases Gene Polymorphisms with Susceptibility to Rheumatoid Arthritis: A Meta-Analysis

Objective: Association of matrix metalloproteinases (MMPs) gene polymorphisms with rheumatoid arthritis is controversial. We conduct a meta-analysis to clarify this dispute.

Methods: We systematically searched the electronic PUBMED, EMBASE and CNKI databases for research articles about MMPs (MMP-1, MMP-2, MMP-3, MMP-9) gene polymorphisms and rheumatoid arthritis (RA) up to January 2015. According to the heterogeneity, fixed-effects or random-effects models were used to calculate crude odds ratios (ORs) and 95% confidence intervals (95% CIs).

Results: A total of 11 articles involving 2143 cases and 2049 controls were included in this meta-analysis. Overall, no significant associations were observed between MMP-1-1607 1G/2G polymorphism and RA. Stratification by ethnicity, no significant associations were observed in Caucasian populations. Similarly, no significant associations were observed between MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms and RA in overall and Caucasian populations, respectively. However, a weak association was found between MMP-2-1306 C/T polymorphism and RA (C vs. T, OR?=?0.813, 95%CI?=?0.694–0.953, p?=?0.010) in overall populations.

Conclusions: The present meta-analysis suggests that MMP-1-1607 1G/2G, MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms are not associated with the susceptibility of RA, but MMP-2 -1306 C/T is weakly associated with susceptibility to RA. Further studies with more sample size are needed for definitive conclusions.     

GE宝石能谱CT故障分析

简要介绍了GE宝石能谱CT(Discovery CT750 HD)的技术特点,详细阐述了日常使用中出现的间歇性停机、无法进行Fastcal(快速空气校正)以及扫描中断和gantry(扫描架)自动复位3例故障的维修过程,为医院维修人员维修类似故障提供了参考。最后总结了医疗设备常见故障及主要故障原因,提出了快速排查CT故障的方法,并建议在日常使用中及时保养维护以降低设备故障率。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Magnesium intake and primary liver cancer incidence and mortality in the Prostate,Lung, Colorectal and Ovarian Cancer Screening Trial

Epidemiological studies on magnesium intake and primary liver cancer (PLC) are scarce, and no prospective studies have examined the associations of magnesium intake with PLC incidence and mortality. We sought to clarify whether higher magnesium intake from diet and supplements was associated with lower risks of PLC incidence and mortality in the US population. Magnesium intake from diet and supplements was evaluated through a food frequency questionnaire in a cohort of 104,025 participants. Cox regression was employed to calculate hazard ratios for PLC incidence and competing risk regression was employed to calculate subdistribution hazard ratios for PLC mortality. Restricted cubic spline regression was employed to test nonlinearity. We documented 116 PLC cases during 1,193,513.5 person-years of follow-up and 100 PLC deaths during 1,198,021.3 person-years of follow-up. Total (diet + supplements) magnesium intake was found to be inversely associated with risks of PLC incidence (hazard ratio_{tertile 3 vs. 1}: 0.44; 95% confidence interval: 0.24, 0.80; p_trend = 0.0065) and mortality (subdistribution hazard ratio_{tertile 3 vs. 1}: 0.37; 95% confidence interval: 0.19, 0.71; p_trend = 0.0008). Similar results were obtained for dietary magnesium intake. Nonlinear inverse dose–response associations with PLC incidence and mortality were observed for both total and dietary magnesium intakes (all p_nonlinearity < 0.05). In summary, in the US population, a high magnesium intake is associated with decreased risks of PLC incidence and mortality in a nonlinear dose–response manner. These findings support that increasing the consumption of foods rich in magnesium may be beneficial in reducing PLC incidence and mortality.     

试论异常毒性作为药品质量控制指标的合理性

异常毒性最初是一种确保复杂成分制剂生产工艺一致性及安全性的辅助检测手段，后来成为针对外源性毒性污染物的通用安全性检测项，曾在世界范围内被各国药典收载。由于该检测与药品质量、安全性之间的关联性受到质疑，各国药典逐渐在各论及通则中删除该检测项，目前仅《中国药典》保留异常毒性。由于该检测存在设定限值难以统一、给药体积及给药剂量不合理、结果易受干扰且缺乏明确的判定标准等试验原理及设计上的缺陷，导致其试验结果没有实际参考意义。基于对历史数据的回顾分析，国际监管机构及卫生组织对异常毒性有了更为科学的认知，并已逐渐形成统一的监管共识：严格的生产控制措施和有效的质量检测手段，比异常毒性检测更为重要；异常毒性检测结果或与产品质量及污染不具相关性；在异常毒性检查中使用大量动物不符合动物福利和“3R”原则。本文从科学角度试论异常毒性作为药品质量控制指标的合理性，并总结异常毒性修订的科学原则，希望能为我国监管机构、制药行业修订异常毒性相关内容提供思考角度。     

Exact confidence intervals for the average causal effect on a binary outcome

Based on the physical randomization of completely randomized experiments, in a recent article in Statistics in Medicine, Rigdon and Hudgens propose two approaches to obtaining exact confidence intervals for the average causal effect on a binary outcome. They construct the first confidence interval by combining, with the Bonferroni adjustment, the prediction sets for treatment effects among treatment and control groups, and the second one by inverting a series of randomization tests. With sample size n, their second approach requires performing O(n⁴)randomization tests. We demonstrate that the physical randomization also justifies other ways to constructing exact confidence intervals that are more computationally efficient. By exploiting recent advances in hypergeometric confidence intervals and the stochastic order information of randomization tests, we propose approaches that either do not need to invoke Monte Carlo or require performing at most O(n²)randomization tests. We provide technical details and R code in the Supporting Information . Copyright © 2016 John Wiley & Sons, Ltd.