Evaluation of Degenerative Lumbar Scoliosis After Short Segment Decompression and Fusion

The objective of this study was to investigate short segment decompression of degenerative lumbar scoliosis (DLS) and the efficiency of fusion treatment.After DLS surgery, the patients were retrospectively reviewed using the VAS (visual analog scale) and ODI (Oswestry Disability Index) to assess clinical outcomes. All patients underwent posterior lumbar decompressive laminectomy, pedicle screw internal fixation, and posterolateral bone graft fusion surgery. Radiographic measurements included the scoliotic Cobb angle, the fused Cobb angle, the anterior intervertebral angle (AIA), the sagittal intervertebral angle (SIA), and lumbar lordosis angle. The relationships between these parameters were examined by bivariate Pearson analysis and linear regression analysis.Preoperatively, the Cobb angle at the scoliotic segment was 15.4°, which decreased to 10.2° immediately following surgery (P < 0.05). The AIA significantly increased by the last follow-up (4.4 ± 3.4) compared with pre- and postoperative values (2.5 ± 2.8 and 2.2 ± 2.4, respectively; P < 0.05). However, the scoliotic Cobb angle and the AIA did not correlate with the VAS or ODI scores. At the final follow-up, no patients had pseudoarthrosis or internal instrumentation-related complications.Short fusion surgical treatment results in limited DLS correction, with correction loss over time. The AIA between the upper adjacent segment and proximal fused vertebra continues to increase postoperatively, which does not exacerbate clinical symptoms, as reflected by the low reoperation rates for repairing degeneration at adjacent levels.     

Association Study of Matrix Metalloproteinases Gene Polymorphisms with Susceptibility to Rheumatoid Arthritis: A Meta-Analysis

Objective: Association of matrix metalloproteinases (MMPs) gene polymorphisms with rheumatoid arthritis is controversial. We conduct a meta-analysis to clarify this dispute.

Methods: We systematically searched the electronic PUBMED, EMBASE and CNKI databases for research articles about MMPs (MMP-1, MMP-2, MMP-3, MMP-9) gene polymorphisms and rheumatoid arthritis (RA) up to January 2015. According to the heterogeneity, fixed-effects or random-effects models were used to calculate crude odds ratios (ORs) and 95% confidence intervals (95% CIs).

Results: A total of 11 articles involving 2143 cases and 2049 controls were included in this meta-analysis. Overall, no significant associations were observed between MMP-1-1607 1G/2G polymorphism and RA. Stratification by ethnicity, no significant associations were observed in Caucasian populations. Similarly, no significant associations were observed between MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms and RA in overall and Caucasian populations, respectively. However, a weak association was found between MMP-2-1306 C/T polymorphism and RA (C vs. T, OR?=?0.813, 95%CI?=?0.694–0.953, p?=?0.010) in overall populations.

Conclusions: The present meta-analysis suggests that MMP-1-1607 1G/2G, MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms are not associated with the susceptibility of RA, but MMP-2 -1306 C/T is weakly associated with susceptibility to RA. Further studies with more sample size are needed for definitive conclusions.     

Severe lumbar spinal stenosis combined with Guillain-Barré syndrome: A case report

BACKGROUNDGuillain-Barré syndrome (GBS) is a rare disorder that typically presents with ascending weakness, pain, paraesthesias, and numbness, which mimic the findings in lumbar spinal stenosis. Here, we report a case of severe lumbar spinal stenosis combined with GBS.CASE SUMMARYA 70-year-old man with a history of lumbar spinal stenosis presented to our emergency department with severe lower back pain and lower extremity numbness. Magnetic resonance imaging confirmed the diagnosis of severe lumbar spinal stenosis. However, his symptoms did not improve postoperatively and he developed dysphagia and upper extremity numbness. An electromyogram was performed. Based on his symptoms, physical examination, and electromyogram, he was diagnosed with GBS. After 5 d of intravenous immunoglobulin (0.4 g/kg/d for 5 d) therapy, he gained 4/5 of strength in his upper and lower extremities and denied paraesthesias. He had regained 5/5 of strength in his extremities when he was discharged and had no symptoms during follow-up.CONCLUSIONGBS should be considered in the differential diagnosis of spinal disorder, even though magnetic resonance imaging shows severe lumbar spinal stenosis. This case highlights the importance of a careful diagnosis when a patient has a history of a disease and comes to the hospital with the same or similar symptoms.     

血清胱抑素C和尿微量白蛋白联合检测在人类免疫缺陷病毒感染者肾功能损伤检测中的应用价值

目的评估血肌酐和尿常规的常规检测基础上联合血清胱抑素C和尿微量白蛋白检测在人类免疫缺陷病毒（HIV）感染者肾功能损伤检测中的应用价值。 方法以2019年2～5月于首都医科大学附属北京地坛医院感染一科住院的169例HIV感染者为研究对象，完善其尿常规、尿微量白蛋白、血肌酐、血清胱抑素C检测；分析尿蛋白及尿微量白蛋白的阳性检出率及其差异，血肌酐升高及血清胱抑素C升高的比例及其差异。计算应用替诺福韦酯（TDF）及合并丙型肝炎、高血压、糖尿病、肿瘤的肾功能损伤的相对危险度。 结果169例HIV感染者中尿常规示尿蛋白阳性者5例（3.0%），尿微量白蛋白升高者17例（10.1%），两者阳性检出率差异具有统计学意义（χ² = 5.9、P = 0.007）。血肌酐升高者10例（5.9%），血清胱抑素C升高者20例（11.8%），两者阳性检出率差异具有统计学意义（χ² = 3.0、P = 0.042）。在尿常规和血肌酐检测的基础上联合检测尿微量白蛋白和血清胱抑素C的总体阳性检出率为49例（30.0%）。CD4⁺ T淋巴细胞计数< 200个/μl与≥ 200个/μl组患者血清胱抑素C水平分别为0.94（0.83，1.05）mg/L、0.85（0.77，0.95）mg/L，差异具有统计学意义（Z =-3.02、P = 0.003）。应用TDF及合并丙型肝炎、高血压、糖尿病、肿瘤的肾功能损伤的相对危险度分别为1.1、1.5、1.9、2.2和1.4。 结论HIV感染者中，单纯以尿常规为依据评估有无蛋白尿，以血肌酐水平为依据评估肾小球滤过功能会低估肾功能损伤的患病率。在常规检测血肌酐和尿常规的基础上联合检测血清胱抑素C和尿微量白蛋白在提高HIV感染者肾功能损伤检出率方面具有重要的应用价值。低CD4⁺ T淋巴细胞计数、应用TDF及合并丙型肝炎、高血压、糖尿病、肿瘤均为肾功能损伤的危险因素。     

不同手术方案对脊髓型颈椎病合并椎管狭窄症患者术后疗效及颈椎矢状位参数的影响

目的探讨前路椎体次全切除术和后路椎管扩大椎板成形术对脊髓型颈椎病(CSM)合并椎管狭窄症患者术后疗效及颈椎矢状位参数的影响。方法回顾性分析2010年3月—2015年8月收治的147例CSM合并椎管狭窄症患者的临床资料,其中80例行前路椎体次全切除术治疗(A组),67例行后路椎管扩大椎板成形术治疗(B组)。比较2种手术方法治疗前后日本骨科学会(JOA)评分、Cobb角及矢状位垂直距离(SVA)。将2组患者根据T_1倾斜角分别分为高T_1倾斜角(≥25°)亚组和低T_1倾斜角( 25°)亚组,对不同亚组之间的疗效及手术安全性进行比较。结果 2组术后JOA评分和Cobb角均高于术前,差异有统计学意义(P 0.05)。A组术后SVA低于术前,差异有统计学意义(P 0.05),B组术后SVA与术前相比差异无统计学意义(P 0.05)。A组术后JOA评分和Cobb角均高于B组,SVA低于B组,差异均有统计学意义(P 0.05)。A组中,高T_1倾斜角亚组和低T_1倾斜角亚组JOA评分改善效果和后凸畸形发生率比较差异无统计学意义(P 0.05);B组中,低T_1倾斜角亚组JOA评分改善效果和后凸畸形发生率优于高T_1倾斜角亚组,差异均有统计学意义(P 0.05)。结论相较于后路椎管扩大椎板成形术,前路椎体次全切除术治疗CSM合并椎管狭窄症临床疗效更佳,且有助于改善颈椎矢状位平衡;在高T_1倾斜角水平下,应尽可能选择前路椎体次全切除术。     

Resting respiratory sinus arrhythmia moderates the association between social phobia symptoms and self‐reported physical symptoms

The present study sought to investigate the association between social phobia symptoms and self‐reported physical symptoms and the moderation effect of resting respiratory sinus arrhythmia (RSA) on this link. Data of 5‐min resting RSA, social phobia symptoms assessed by the Social Phobia Scale, and physical symptoms assessed by the Cohen–Hoberman Inventory of Physical Symptoms were collected from 167 undergraduate students. Results indicated that higher levels of social phobia symptoms were associated with higher levels of self‐reported physical symptoms. Resting RSA played the moderating role in the link between social phobia symptoms and self‐reported physical symptoms, such that social phobia symptoms were positively associated with self‐reported physical symptoms among individuals with low resting RSA, whereas this association was nonsignificant among individuals with high resting RSA. These findings suggest that high resting RSA as a physiological marker of better self‐regulation capacity might buffer the effect of social phobia symptoms on physical health.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.