运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

Comparison of screw fixation versus non-fixation in dorsal opening wedge medial cuneiform osteotomy of adult acquired flatfoot

BackgroundThe aim of this study was to compare the radiographic and functional results between fixation and non-fixation in the Cotton osteotomy for the treatment of adult acquired flatfoot.MethodsA retrospective, case-controlled study of consecutive stage IIB posterior tibial tendon dysfunction (PTTD) patients treated with the same bony reconstructive surgery including cotton osteotomy between 2013 and 2017. Meary’s angle, the medial arch sag angle (MASA), and medial cuneiform cobb angle (MCCA) were evaluated pre-operation, at first weight bearing after surgery, and 12 months post operation.ResultsForty feet were included in the study. The cotton osteotomy utilized screw fixation (n = 20) or non-fixation technique (n = 20). No significant differences between groups were found in pre-operative and follow-up radiographic parameters, union rate, and functional results.ConclusionThe non-fixation with press fit technique is a reliable procedure for Cotton osteotomy and as effective as screw fixation.Level of evidenceLevel III, case control study     

不同非密闭雾化治疗方式在不合作患儿中的应用效果

目的 探讨不同非密闭雾化方式在不合作患儿接受布地奈德雾化治疗中的应用效果。方法 选取本院门诊270例3岁以下使用布地奈德雾化治疗的患儿,采用随机数字表法将患儿分为Pari雾化系统、Philips雾化系统及Salter雾化系统3个治疗组,毎组90例,各组又依据面罩距离面部0 cm、2 cm、4 cm分为3个小组,毎组30例,分别测量各组雾化气流流速及吸入雾化颗粒量占总雾化颗粒量的比例。采用方差分析及Bonferroni进行统计分析。结果 雾化气流流速及雾化吸入量在不同雾化系统组间差异有统计学意义(P<0.05)。在3种距离下,Pari系统均能使患儿吸入最多量的雾化颗粒,其次是Salter系统,再是Philips系统,与此相反,气流流速Pari系统最低。Pari系统离开面部4 cm及Salter系统离开面部2 cm的吸入量均高于Philips系统0 cm的吸入量。结论 选择合适的非密闭雾化系统方式,是提高不合作患儿布地奈德雾化治疗的有效方式。     

Retrograde Instrumentation of Surgically Resected Roots Using Controlled Memory Files: A Human Cadaver Study

IntroductionThe purpose of this study is to evaluate the amount of residual obturation material of retroinstrumented surgically resected roots using controlled memory files and to evaluate the incidence of adverse treatment outcomes.MethodsThirty maxillary anterior teeth in human cadavers were selected, and nonsurgical root canal treatment was performed on these teeth. A standardized 4-mm osteotomy and a 3-mm root resection with as close to 0° bevel as possible were made on each tooth. A microsurgical diamond tip was used to create a 1- to 2-mm starting point for each retropreparation. A 25/06 and 30/06 VTaper 2H were bent at about 90° angle to mimic the clinical and anatomic restrictions and used to create a retropreparation to a depth of 14 mm. Micro–computed tomography scans were taken and analyzed for volume and percentage of residual obturation material at 5 and 10 mm. In addition, the incidences of instrument separation and crack and ledge formation in the teeth were recorded.ResultsThe median volume of residual obturation at 5 and 10 mm was 0.18 mm³ (interquartile range, 0.36 mm³) and 1.97 mm³ (interquartile range, 1.99 mm³), respectively. The overall incidence of file separation during retropreparation was 13.33% (4/30). Among the cases analyzed with micro–computed tomography, none showed crack or ledge formation.ConclusionsRetroinstrumentation of surgically resected roots using controlled memory files cleans the canal effectively with relatively low adverse treatment outcomes. Although this novel technique is limited in application, it is a safe and effective way to achieve a deep, clean retropreparation.     

Salvage of a failed valgus osteotomy for non-union of an unstable pertrochanteric fracture

Salvage of a failed valgus osteotomy for nonunion of an unstable pertrochanteric fracture is reported. A valgus intertrochanteric osteotomy was performed for a failed sliding hip screw fixation of an unstable pertrochanteric fracture at another institution. Four months following osteotomy, the fracture was still un-united with two distal screws of the hip plate broken and a coxa vara deformity. Reconstruction was performed with a nine-hole 95° angle blade plate and cancellous bone graft, because the insufficient fixation of the distal fragment was considered to be the main reason for failure. The osteotomy was healed at six months post-surgery and the patient reported complete resolution of symptoms. Intertrochanteric valgus osteotomy is an effective procedure for mal-union and non-union of pertrochanteric fracture but stable fixation is required for a good result. The blade of the angle plate offers good purchase of the proximal fragment and secures it under rotational and bending stresses. We recommend that distal fragments should be fixed with at least seven cortices for this type of osteotomy.     

口内入路下颌角弧线形截骨术

目的:探索更好的下颌角肥大截骨缩小术式。方法:为获得更好的术后效果,我们采用口内入路下颌角弧形截骨术,将弧形截骨线延长到颏神经处,并对颏结节进行打磨,使截骨线延续流畅,伴小颏者同时行隆颏或颏截骨前移。结果:自2002年以来,我科采用口内入路下颌角长弧线形截骨术矫正320例下颌角肥大患者,均取得了良好的效果。结论:口内入路延长弧形截骨术缩小下颌角可以获得更好术后效果。     

全脊柱截骨矫正严重后凸畸形

[目的]探讨全脊柱截骨矫正脊柱后凸的治疗经验。[方法]全脊柱截骨加椎弓根钉内固定系统闭合及植骨矫正脊柱后凸。[结果]于1984～2005年采用上述方法治疗50例病人。术后全组病例均未发生脊髓损伤，术后临床症状得到不同程度的改善。经历2～15a平均2．4a随访，X线CT复查示螺钉位置良好，无松动断钉。植骨3个月后均达到满意融合。[结论]经全脊柱截骨加有效的内固定手术不仅手术视野开阔操作安全方便；而且截骨和内固定相结合同时完成，是治疗脊柱后凸目前更完善并不断改进一种好方法。     

Application of an augmented reality tool for maxillary positioning in orthognathic surgery – A feasibility study

BACKGROUND: An augmented reality tool for computer assisted surgery named X-Scope allows visual tracking of real anatomical structures in superposition with volume rendered CT or MRI scans and thus can be used for navigated translocation of bony segments. METHODS: In a feasibility study X-Scope was used in orthognathic surgery to control the translocation of the maxilla after Le Fort I osteotomy within a bimaxillary procedure. The situation achieved was compared with the pre-operative situation by means of cephalometric analysis on lateral and frontal cephalograms. RESULTS: The technique was successfully utilized in 5 patients. Maxillary positioning using X-Scope was accomplished accurately within a range of 1mm. The tool was used in all cases in addition to the usual intra-operative splints. A stand-alone application without conventional control does not yet seem reasonable. CONCLUSION: Augmented reality tools like X-Scope may be helpful for controlling maxillary translocation in orthognathic surgery. The application to other interventions in cranio-maxillofacial surgery such as Le Fort III osteotomy, fronto-orbital advancement, and cranial vault reshaping or repair may also be considered.