Paclitaxel-loaded polyester nanoparticles prepared by spray-drying technology: in vitro bioactivity evaluation

Paclitaxel (PTX), an antimicrotubular agent used in the treatment of ovarian and breast cancer, was encapsulated in nanoparticles (NPs) of poly(lactide-co-glycolide) (PLGA) and poly(ε-caprolactone) (PCL) polymers using the spray-drying technique. Morphology, size distribution, drug encapsulation efficiency, thermal degradation and drug release were characterized. MCF7 cells were employed to evaluate the efficacy of the systems on cell cycle and cytotoxicity. The particle size was in the range 0.8–1?µm. The incorporation efficiency of PTX was more than 80% in all NPs obtained. In vitro drug release took place during 35 days, and drug release rates were in the order PCL?>?PLGA 50:50?>?PLGA 75:25. Unloaded NPs showed to be cytocompatible at MCF7 cells. PTX-loaded NPs demonstrated the release of the drug block cells in the G2/M phase. All PTX-loaded formulations showed their efficacy in killing MCF7 cells, mainly PTX-loaded PLGA 50:50 and PLGA 75:25 that cause a decrease in cell viability lower than 20%.     

Paclitaxel-loaded polyester nanoparticles prepared by spray-drying technology: in vitro bioactivity evaluation

Paclitaxel (PTX), an antimicrotubular agent used in the treatment of ovarian and breast cancer, was encapsulated in nanoparticles (NPs) of poly(lactide-co-glycolide) (PLGA) and poly(ε-caprolactone) (PCL) polymers using the spray-drying technique. Morphology, size distribution, drug encapsulation efficiency, thermal degradation and drug release were characterized. MCF7 cells were employed to evaluate the efficacy of the systems on cell cycle and cytotoxicity. The particle size was in the range 0.8-1?μm. The incorporation efficiency of PTX was more than 80% in all NPs obtained. In?vitro drug release took place during 35 days, and drug release rates were in the order PCL?>?PLGA 50:50?>?PLGA 75:25. Unloaded NPs showed to be cytocompatible at MCF7 cells. PTX-loaded NPs demonstrated the release of the drug block cells in the G2/M phase. All PTX-loaded formulations showed their efficacy in killing MCF7 cells, mainly PTX-loaded PLGA 50:50 and PLGA 75:25 that cause a decrease in cell viability lower than 20%.     

无稳定剂修饰的汉防己甲素PLGA纳米粒制备及体外评价

目的:制备无稳定剂修饰的汉防己甲素PLGA纳米粒,研究其理化性质及细胞毒和细胞摄取特性。方法:以聚乳酸-羟基醋酸共聚物(PLGA)为载体材料,采用无稳定剂修饰的纳米沉淀法制备汉防己甲素纳米粒;通过单因素试验考察不同制备工艺对纳米粒理化性质的影响;通过载药量、包封率、累积释药量等指标考察其载药特性;采用MTT比色法检测其对人肺腺癌细胞株A549的细胞毒性;采用共聚焦显微镜技术考察其细胞摄取特性。结果:无稳定剂修饰的汉防己甲素PLGA纳米粒平均粒径169.3 nm,与有稳定剂的汉防己甲素PLGA纳米粒相比外观无明显改变。在一定范围内,随着PLGA用量的增加,纳米粒的粒径呈上升趋势;随着投药量的增加,纳米粒的载药量显著增加,包封率下降。在pH7.4的释放介质中,纳米粒释慢释药,96 h累积释药率60.44%。细胞毒试验显示,当培养时间为8 h时,汉防己甲素组的细胞毒性大于汉防己甲素纳米粒组;当培养时间延长至24 h时,汉防己甲素纳米粒组的细胞活性明显低于纯药物组;高剂量的空白纳米粒组始终表现较低的细胞毒性。激光共聚焦电镜断层扫描显示汉防己甲素纳米粒能够较好的被细胞摄取。结论:制备的无稳定剂修饰的汉防己甲素PLGA纳米粒大小均一,包封率高,体外释药表现出较好的缓释效果,易被细胞摄取,对A549细胞的增殖有明显的抑制作用。     

Targeted delivery of monoclonal antibody conjugated docetaxel loaded PLGA nanoparticles into EGFR overexpressed lung tumour cells

The aim of this study was to develop anti-EGFR antibody conjugated poly(lactide-co-glycolide) nanoparticles (NPs) to target epidermal growth factor receptor, highly expressed on non-small cell lung cancer cells to improve cytotoxicity and site specificity. Cetuximab was conjugated to docetaxel (DTX) loaded PLGA NPs by known EDC/NHS chemistry and characterised for size, zeta potential, conjugation efficiency and the results were 128.4?±?3.6?nm, –31.0?±?0.8?mV, and 39.77?±?3.4%, respectively. In vitro release study demonstrated sustained release of drug from NPs with 25% release at pH 5.5 after 48?h. In vitro cytotoxicity studies demonstrated higher anti-proliferative activity of NPs than unconjugated NPs. Cell cycle analysis and apoptosis study were performed to evaluate extent of cell arrest at different phases and apoptotic potential for the formulations, respectively. In vivo efficacy study showed significant reduction in tumour growth and so antibody conjugated NPs present a promising active targeting carrier for tumour selective therapeutic treatment.     

Poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles prepared by high pressure homogenization for paclitaxel chemotherapy

High pressure homogenization was employed in the current work to prepare poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) for controlled release of paclitaxel. The prepared drug-loaded PLGA NPs were found of spherical shape with a size of 200-300 nm. The drug encapsulation efficiency ranged from 34.8+/-1.6 to 62.6+/-7.9% depending on the homogenization pressure and cycles. Paclitaxel was released from the nanoparticles in a biphasic profile with a fast release rate in the first 3 days followed by a slow first-order release. A higher or comparable cytotoxicity against glioma C6 cells was found for the drug formulated in the PLGA NPs in comparison with the free drug Taxol. Confocal laser scanning microscopy (CLSM) evidenced internalization of the fluorescent coumarin 6-loaded PLGA NPs by the C6 cells. The freeze-dried nanoparticles were found to possess excellent water redispersability. The high pressure homogenization could be applied for large industrial scale production of nanoparticles for drug delivery.     

Self-Assembled Biodegradable Nanoparticles Developed by Direct Dialysis for the Delivery of Paclitaxel

Purpose The main objective of this study was to obtain self-assembled biodegradable nanoparticles by a direct dialysis method for the delivery of anticancer drug. The in vitro cellular particle uptake and cytotoxicity to C6 glioma cell line were investigated. Methods Self-assembled anticancer drugs—paclitaxel-loaded poly(d,l-lactic-co-glycolic acid) (PLGA) and poly(l-lactic acid) (PLA) nanoparticles—were achieved by direct dialysis. The physical and chemical properties of nanoparticles were characterized by various state-of-the-art techniques. The encapsulation efficiency and in vitro release profile were measured by high-performance liquid chromatography. Particle cellular uptake was studied using confocal microscopy, microplate reader, and flow cytometry. In addition, the cytotoxicity of this drug delivery system was evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay on C6 glioma cell line to predict the possible dose response of paclitaxel-loaded PLGA and PLA nanoparticles. Results PLGA and PLA nanoparticles with or without vitamin E tocopherol polyethylene glycol succinate (TPGS) as an additive were obtained, in which the sustained release of paclitaxel of more than 20 days was achieved. The coumarin6-loaded PLGA and PLA nanoparticles could penetrate the C6 glioma cell membrane and be internalized. The cytotoxicity of paclitaxel-loaded nanoparticles seemed to be higher than that of commercial Taxol? after 3 days incubation when paclitaxel concentrations were 10 and 20 μg/ml. Conclusions Direct dialysis could be employed to achieve paclitaxel-loaded PLGA and PLA nanoparticles, which could be internalized by C6 glioma cells and enhance the cytotoxicity of paclitaxel because of its penetration to the cytoplasm and sustained release property.     

Brain-targeted delivery of doxorubicin using glutathione-coated nanoparticles for brain cancers

Abstract

Objectives: To prepare and characterize in vitro a novel brain-targeted delivery of doxorubicin using glutathione-coated nanoparticles (NPs) for the treatment of brain cancer.

Methods: Doxorubicin-loaded NPs were prepared by the nanoprecipitation method using PLGA-COOH (dl-lactide-co-glycolide). The NPs were coated with a glutathione-PEG conjugate (PEG-GSH) in order to target delivery to the brain. The NPs were characterized via in vitro studies to determine particle size, drug release, cellular uptake, immunofluorescence study, cytotoxic assay, and in vitro blood–brain barrier (BBB) assay.

Results: The NPs showed a particle size suitable for BBB permeation (particle size around 200?nm). The in vitro release profile of the NPs exhibited no initial burst release and showed sustained drug release for up to 96?h. The immunofluorescence study showed the glutathione coating does not interfere with the drug release. Furthermore, in vitro BBB Transwell? study showed significantly higher permeation of the doxorubicin-loaded NPs compared with the free doxorubicin solution through the coculture of rat brain endothelial (RBE4) and C6 astrocytoma cells (p?<?0.05).

Conclusions: We conclude that the initial in vitro characterization of the NPs demonstrates potential in delivering doxorubicin to cancer cells with possible future application in targeting brain cancers in vivo.     

Surfactant-free poly(lactide-co-glycolide) nanoparticles for improving in vitro anticancer efficacy of tetrandrine

The objective of this study was to improve the efficacy of a natural compound tetrandrine against cancer by designing surfactant-free poly(lactic-co-glycolic acid) (PLGA) nanoparticles as drug carriers for tetrandrine. Nanoparticles were prepared from PLGA via the nano-precipitation method with or without the presence of surfactant poly(vinyl alcohol) (PVA) to encapsulate tetrandrine. Tetrandrine-loaded surfactant-free PLGA nanoparticles had an average particle size of 169.3?nm and morphology similar to the PLGA nanoparticles prepared using PVA as the surfactant. Tetrandrine-loaded surfactant-free PLGA nanoparticles could retard drug release in phosphate buffered saline (PBS) at pH 7.4 and the cumulative release of tetrandrine reached up to 68.33% over a period of 120?h. A549 cell line was used as the model cancer cells to investigate anticancer capability of tetrandrine-loaded surfactant-free PLGA nanoparticles via apoptosis assay, cytotoxicity and lysosome injury studies. The results showed that tetrandrine-loaded surfactant-free PLGA nanoparticles could effectively reduce cell viability and synergistically enhance tetrandrine-induced cell apoptosis.     

Brain-targeted delivery of Tempol-loaded nanoparticles for neurological disorders

Brain-targeted Tempol-loaded poly-(lactide-co-glycolide) (PLGA) nanoparticles (NPs) conjugated with a transferrin antibody (OX 26) were developed using the nanoprecipitation method. These NPs may have utility in treating neurodegenerative diseases such as Parkinson’s disease and Alzheimer’s disease. Central to these diseases is an increased production of reactive oxygen and nitrogen species which may take part in the development of these conditions. As proof of principle, the NPs were loaded with Tempol, a free radical scavenger that has been shown to be protective against oxidative insults. To enhance the delivery of NPs to the central nervous system (CNS), we conjugated the transferrin receptor antibody covalently to PLGA NPs using the NHS-PEG3500-Maleimide crosslinker. The NPs showed a particle size suitable for blood brain barrier (BBB) permeation (particle size 80–110?nm) and demonstrated a sustained drug release behavior. A high cellular uptake of antibody-conjugated NPs was demonstrated in RG2 rat glioma cells. The ability of the Tempol-loaded NPs to prevent cell death by resveratrol in RG2 cells was determined using the MTT assay. The conjugated NPs containing Tempol were more effective in preventing cell viability by resveratrol when compared with unconjugated NPs or free Tempol in solution. Our findings suggest that transferrin-conjugated NPs containing antioxidants may be useful in the treatment of neurodegenerative diseases.     

Preparation,statistical optimisation and in vitro characterisation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (lactic-co-glycolic acid) blend nanoparticles for prolonged delivery of teriparatide

The purpose of this study was the preparation, optimisation and in vitro characterisation of PHBV and PLGA blend nanoparticles (NPs) for prolonged delivery of Teriparatide. Double emulsion solvent evaporation technique was employed for the fabrication of NPs. The nanoformulation was optimised using the Box–Behnken methodology. The morphological properties of NPs were assessed by both SEM and transmission electron microscopy (TEM). Encapsulation of Teriparatide within the NPs and lacking of chemical bonds between drug and copolymers were proved by XRPD, FTIR and DSC. The structural stability of Teriparatide after processing was confirmed by fluorescence spectrometry. The average size of optimised NPs was 250.0?nm with entrapment efficiency (EE) of 89.5% and drug loading (DL) of 5.0%. Teriparatide release from optimised NPs led to 64.4% release over 30 days and it showed a diffusion-based mechanism. Based on the favourable results, PHBV/PLGA blend NPs could be a promising candidate for designing a controlled release formulation of Teriparatide.     

Transferrin-appended PEGylated nanoparticles for temozolomide delivery to brain: in vitro characterisation

Polymer-based nanotechnologies are proposed to be an alternative for drug administration, delivery and targeting to those of conventional formulations. The blood brain barrier is frequently a rate-limiting factor in determining permeation of a drug into brain. In this study, the surface-engineered long-circulating PLGA nanoparticles (NPs) were assessed for brain-specific delivery. Long circulating NPs of PLGA- and PEG-synthesised copolymer were prepared by emulsification solvent evaporation method. Further, the surface of PEGylated NPs was modified by anchoring transferrin (Tf) ligand for receptor-mediated targeting to brain. NPs were characterised for shape and size, zeta potential, entrapment efficiency and in?vitro drug release. In?vitro cytotoxicity studies were performed on human cancer cell lines. Confocal Laser Scanning Microscopy studies show the enhanced uptake of Tf-appended PEGylated NPs and their localisation in the brain tissues. Hence, the specific role of Tf ligand on PEGylated NPs for brain delivery was confirmed.     

泊洛沙姆188-PLGA纳米给药系统对抗耐药肿瘤的研究

目的 利用泊洛沙姆188对PLGA进行化学修饰,制备包载阿霉素的纳米粒,并评价纳米粒在人耐药乳腺癌细胞中的摄取能力及毒性。方法 通过EDC/NHS法合成泊洛沙姆188-PLGA,通过核磁共振对其结构进行表征并测定临界胶束浓度;通过纳米沉淀法制备包载阿霉素的纳米粒,通过粒度仪对纳米粒的粒径及分布进行分析,通过细胞摄取实验及细胞毒性实验对纳米粒的摄取效果及毒性进行评价。结果 成功合成了泊洛沙姆188-PLGA,并制备了粒径在140 nm左右的纳米粒,该纳米粒在人耐药乳腺癌细胞中有较好的摄取效果及较强的毒性。结论 泊洛沙姆188能够逆转耐药,增强耐药细胞对化疗药物的敏感程度。     

Revisiting the nanoformulation design approach for effective delivery of topotecan in its stable form: an appraisal of its in vitro Behavior and tumor amelioration potential

Topotecan (TPT) is indicated against a variety of solid tumors, but has restricted clinical use owing to associated pharmaceutical caveats. This study is focused at formulating a successful TPT PLGA nanosystem which ameliorates the rapid conversion of active lactone form of drug to its inactive carboxylate form and consequently improvises its efficacy. TPT PLGA nanoparticles were formulated by a double emulsion-solvent evaporation technique with sequential optimization to obtain desired particle size, PDI, zeta potential, and entrapment efficiency. Stability of TPT was ensured by maintaining an acidic pH in the drug-containing phase and the system was evaluated for in vitro–in vivo performance including cytotoxic potency. The optimized nanosystem had a particle size of 187.33?±?7.50?nm, a PDI of 0.179?±?0.05, and an entrapment efficiency of 56?±?1.2%. Low pH in the interior of nanoparticles stabilized the drug to remain in its active lactone form and revealed a biphasic release pattern till 15?d. Additionally, an in vitro cytotoxicity testing as well as in vivo antitumor efficacy demonstrated a significant potential of higher proliferation inhibition as compared with neat drug (TPT). Thus, the investigation summarized an innovative simple tool for developing stable TPT NPs for effective delivery for treating solid tumors.     

Brain-targeted delivery of paclitaxel using glutathione-coated nanoparticles for brain cancers

Paclitaxel is not effective for treatment of brain cancers because it cannot cross the blood–brain barrier (BBB) due to efflux by P-glycoprotein (P-gp). In this work, glutathione-coated poly-(lactide-co-glycolide) (PLGA) nanoparticles (NPs) of paclitaxel were developed for brain targeting for treatment of brain cancers. P-gp ATPase assay was used to evaluate the NP as potential substrates. The NP showed a particle size suitable for BBB permeation (particle size around 200?nm) and higher cellular uptake of the NP was demonstrated in RG2 cells. The P-gp ATPase assay suggested that the NP were not substrate for P-gp and would not be effluxed by P-gp present in the BBB. The in vitro release profile of the NP exhibited no initial burst release and showed sustained drug release. The proposed coated NP showed significantly higher cytotoxicity in RG2 cells compared with uncoated NP (p?≤?0.05). Tubulin immunofluorescent study showed higher cell death by the NP due to increased microtubule stabilization. In vivo brain uptake study in mice showed higher brain uptake of the NP containing coumarin-6 compared with solution. The proposed brain-targeted NP delivery of paclitaxel could be an effective treatment for the brain cancers.     

pH-responsive nanoparticles releasing tenofovir intended for the prevention of HIV transmission

This study is designed to test the hypothesis that tenofovir (TNF) or tenofovir disoproxil fumarate (TDF) loaded nanoparticles (NPs) prepared with a blend of poly(lactic-co-glycolic acid) (PLGA) and methacrylic acid copolymer (Eudragit® S-100, or S-100) are noncytotoxic and exhibit significant pH-responsive release of anti-HIV microbicides in the presence of human semen fluid simulant (SFS). After NPs preparation by emulsification diffusion, their size, encapsulation efficiency (EE%), drug release profile, morphology, and cytotoxicity are characterized by dynamic light scattering, spectrophotometry, transmission electron microscopy, and cellular viability assay/transepithelial electrical resistance measurement, respectively. Cellular uptake was elucidated by fluorescence spectroscopy and confocal microscopy. The NPs have an average size of 250 nm, maximal EE% of 16.1% and 37.2% for TNF and TDF, respectively. There is a 4-fold increase in the drug release rate from the 75% S-100 blend in the presence of SFS over 72 h. At a concentration up to 10 mg/ml, the PLGA/S-100 NPs are noncytotoxic for 48 h to vaginal endocervical/epithelial cells and Lactobacillus crispatus. The particle uptake (∼50% in 24 h) by these vaginal cell lines mostly occurred through caveolin-mediated pathway. These data suggest the promise of using PLGA/S-100 NPs as an alternative controlled drug delivery system in intravaginal delivery of an anti-HIV/AIDS microbicide.     

Biodegradable Nanoparticles Containing Doxorubicin-PLGA Conjugate for Sustained Release

Purpose. Doxorubicin was chemically conjugated to a terminal end group of poly(D,L-lactic-co-glycolic acid) [PLGA] and the doxorubicin-PLGA conjugate was formulated into nanoparticles to sustain the release of doxorubicin. Methods. A hydroxyl terminal group of PLGA was activated by p-nitrophenyl chloroformate and reacted with a primary amine group of doxorubicin for conjugation. The conjugates were fabricated into ca. 300 nm size nanoparticles by a spontaneous emulsion-solvent diffusion method. The amount of released doxorubicin and its PLGA oligomer conjugates was quantitated as a function of time. The cytotoxicity of the released species was determined using a HepG2 cell line. Results. Loading efficiency and loading percentage of doxorubicin-PLGA conjugate within the nanoparticles were 96.6% and 3.45 (w/w) %, respectively while those for unconjugated doxorubicin were 6.7% and 0.26 (w/w) %, respectively. Both formulation parameters increased dramatically due to the hydrophobically modified doxorubicin by the conjugation of PLGA. The nanoparticles consisting of the conjugate exhibited sustained release over 25 days, whereas those containing unconjugated free doxorubicin showed rapid doxorubicin release in 5 days. A mixture of doxorubicin and its PLGA oligomer conjugates released from the nanoparticles had comparable IC₅₀ value in a HepG2 cell line compared to that of free doxorubicin. Sustained drug release was attributed to the chemical degradation of conjugated PLGA backbone, which permitted water solubilization and subsequent release of doxorubicin conjugated PLGA oligomers into the medium. Conclusions. The conjugation approach of doxorubicin to PLGA was potentially useful for nanoparticle formulations that require high drug loading and sustained release. The doxorubicin-PLGA oligomer conjugate released in the medium demonstrated a slightly lower cytotoxic activity than free doxorubicin in a HepG2 cell line.     

Self-assembled nanoparticles of reduction-sensitive poly (lactic-co-glycolic acid)-conjugated chondroitin sulfate A for doxorubicin delivery: preparation,characterization and evaluation

In this study, reduction-sensitive self-assembled polymer nanoparticles based on poly (lactic-co-glycolic acid) (PLGA) and chondroitin sulfate A (CSA) were developed and characterized. PLGA was conjugated with CSA via a disulfide linkage (PLGA-ss-CSA). The critical micelle concentration (CMC) of PLGA-ss-CSA conjugate is 3.5?µg/mL. The anticancer drug doxorubicin (DOX) was chosen as a model drug, and was effectively encapsulated into the nanoparticles (PLGA-ss-CSA/DOX) with high loading efficiency of 15.1%. The cumulative release of DOX from reduction-sensitive nanoparticles was only 34.8% over 96?h in phosphate buffered saline (PBS, pH 7.4). However, in the presence of 20?mM glutathione-containing PBS environment, DOX release was notably accelerated and almost complete from the reduction-sensitive nanoparticles up to 96?h. Moreover, efficient intracellular DOX release of PLGA-ss-CSA/DOX nanoparticles was confirmed by CLSM assay in A549 cells. In vitro cytotoxicity study showed that the half inhibitory concentrations of PLGA-ss-CSA/DOX nanoparticles and free DOX against A549 cells were 1.141 and 1.825?µg/mL, respectively. Therefore, PLGA-ss-CSA/DOX nanoparticles enhanced the cytotoxicity of DOX in vitro. These results suggested that PLGA-ss-CSA nanoparticles could be a promising carrier for drug delivery.     

Paclitaxel-loaded PLGA nanoparticles surface modified with transferrin and Pluronic®P85, an in vitro cell line and in vivo biodistribution studies on rat model

The development of multidrug resistance (due to drug efflux by P-glycoproteins) is a major drawback with the use of paclitaxel (PTX) in the treatment of cancer. The rationale behind this study is to prepare PTX nanoparticles (NPs) for the reversal of multidrug resistance based on the fact that PTX loaded into NPs is not recognized by P-glycoproteins and hence is not effluxed out of the cell. Also, the intracellular penetration of the NPs could be enhanced by anchoring transferrin (Tf) on the PTX-PLGA-NPs. PTX-loaded PLGA NPs (PTX-PLGA-NPs), Pluronic^®P85-coated PLGA NPs (P85-PTX-PLGA-NPs), and Tf-anchored PLGA NPs (Tf-PTX-PLGA-NPs) were prepared and evaluted for cytotoxicity and intracellular uptake using C6 rat glioma cell line. A significant increase in cytotoxicity was observed in the order of Tf-PTX-PLGA-NPs > P85-PTX-PLGA-NPs > PTX-PLGA-NPs in comparison to drug solution. In vivo biodistribution on male Sprague–Dawley rats bearing C6 glioma (subcutaneous) showed higher tumor PTX concentrations in animals administered with PTX-NPs compared to drug solution.     

Polydopamine and peptide decorated doxorubicin-loaded mesoporous silica nanoparticles as a targeted drug delivery system for bladder cancer therapy

We reported a simple polydopamine (PDA)-based surface modification method to prepare novel targeted doxorubicin-loaded mesoporous silica nanoparticles and peptide CSNRDARRC conjugation (DOX-loaded MSNs@PDA-PEP) for enhancing the therapeutic effects on bladder cancer. Drug-loaded NPs were characterized in terms of size, size distribution, zeta potential, transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) surface area and drug loading content. In vitro drug release indicated that DOX-loaded MSNs@PDA and MSNs@PDA-PEP had similar release kinetic profiles of DOX. The PDA coating well controlled DOX release and was highly sensitive to pH value. Confocal laser scanning microscopy (CLSM) showed that drug-loaded MSNs could be internalized by human bladder cancer cell line HT-1376, and DOX-loaded MSNs@PDA-PEP had the highest cellular uptake efficiency due to ligand–receptor recognition. The antitumor effects of DOX-loaded nanoparticles were evaluated by the MTT assay in vitro and by a xenograft tumor model in vivo, demonstrating that targeted nanocarriers DOX-loaded MSNs@PDA-PEP were significantly superior to free DOX and DOX-loaded MSNs@PDA. The novel DOX-loaded MSNs@PDA-PEP, which specifically recognized HT-1376 cells, can be used as a potential targeted drug delivery system for bladder cancer therapy.     

Preparation and characterization of teniposide PLGA nanoparticles and their uptake in human glioblastoma U87MG cells

Many studies have demonstrated the uptake mechanisms of various nanoparticle delivery systems with different physicochemical properties in different cells. In this study, we report for the first time the preparation and characterization of teniposide (VM-26) poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) and their cellular uptake pathways in human glioblastoma U87MG cells. The nanoparticles prepared with oil-in-water (O/W) single-emulsion solvent evaporation method had a small particle size and spherical shape and provided effective protection against degradation of teniposide in PBS solution. Differential scanning calorimeter (DSC) thermograms concluded that VM-26 was dispersed as amorphous or disordered crystalline phase in the PLGA matrix. A cytotoxicity study revealed that, in a 24h period, blank PLGA NPs had no cytotoxicity, whereas teniposide-loaded PLGA NPs (VM-26-NPs) had U87MG cytotoxicity levels similar to free teniposide. Confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM) images showed the distribution and degradation processes of nanoparticles in cells. An endocytosis inhibition test indicated that clathrin-mediated endocytosis and macropinocytosis were the primary modes of engulfment involved in the internalization of VM-26-NPs. Our findings suggest that PLGA nanoparticles containing a sustained release formula of teniposide may multiplex the therapeutic effect and ultimately degrade in lysosomal within human glioblastoma U87MG cells.