姜黄素-PLGA纳米粒提高口服给药生物利用度的研究

目的 研究乳酸/羟基乙酸共聚物（PLGA）纳米粒子提高姜黄素口服生物利用度。方法 采用乳液挥发法制备姜黄素-PLGA纳米粒;通过透射电镜（transmission electron microscope,TEM）观察纳米粒形态;采用动态光散射法（dynamic light scattering,DLS）测定纳米粒大小、表面电位（Zeta电位）;考察药物的体外稳定性以及药物释放行为;以大鼠口服灌胃给药方式考察姜黄素和姜黄素-PLGA纳米粒的体内药物生物利用度。结果 姜黄素-PLGA纳米粒粒度分布均匀,平均粒径大小约200 nm;姜黄素-PLGA纳米粒具有较高的载药量和包封率以及稳定性,体外药物释放实验结果显示具有一定的缓释效果;口服灌胃100 mg·kg^-1姜黄素和姜黄素-PLGA纳米粒,给药30 min之后,姜黄素-PLGA纳米粒给药组的血药浓度水平显著高于姜黄素组（P〈0.05）,药物生物利用度提高到原来的5.2倍。结论 姜黄素-PLGA纳米粒可以有效的提高姜黄素稳定性和口服给药生物利用度。     

Evaluation of the Effects of Gamma Radiation Sterilization on Rhein-Loaded Biodegradable Microparticles for the Treatment of Osteoarthritis

In previous work, we reported on the design of biodegradable rhein-loaded PLGA microparticles for the treatment of osteoarthritis. Considering that a formulation designed for intra-articular administration must meet sterility requirements to guarantee its safety, in this study the effect of gamma radiation sterilization on these microparticles was evaluated. The size, morphology, and surface characteristics of the microparticles and the encapsulation efficiency of rhein were not affected by the sterilization process. Although DSC and PXRD analyses suggested otherwise, rhein release profiles were not altered by gamma radiation. The release of rhein from the microparticles was fitted to a Gompertz model. In conclusion, the results of this study suggest that gamma radiation is a suitable method for the sterilization of rhein-loaded PLGA microparticles to enable their intra-articular administration in order to provide a therapeutic solution to patients suffering from chronic joint diseases.     

Diclofenac sodium incorporated PLGA (50:50) microspheres: formulation considerations and in vitro/in vivo evaluation

Recently, considerable interest has been focused on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug-delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. Poly (lactide-co-glycolide) (PLGA) polymers have been proven to be excellent drug carriers for microparticulate systems due to their advantages, e.g. biocompatibility and regulatory approval. The administration of nonsteroidal anti-inflammatory drugs (NSAIDs) into the intra-articular cavity in patients with chronic inflammatory disease is complicated due to the short duration of effect. In the present study, controlled-release parenteral formulations of diclofenac sodium (DS), a commonly used NSAID, were prepared for intra-articular administration, and evaluated in vitro for particle size, yield, drug loading, surface morphology and release characteristics. For in vivo studies, Technetium-99m labelled polyclonal human immunogammaglobulin (99m Tc-HIG) was used as the radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post-therapy in rabbits showed no significant difference in the group treated with PLGA (50:50) (mw 34000) DS microspheres compared to control groups.     

Encapsulation of 9-nitrocamptothecin, a novel anticancer drug, in biodegradable nanoparticles: factorial design, characterization and release kinetics.

This study was aimed at developing a polymeric drug delivery system for a new and potent antitumor drug, 9-nitrocamptothecin (9-NC), intended for both intravenous administration and improving the therapeutic index of the drug. To achieve these goals, 9-NC loaded poly(DL-lactide-co-glycolide) (PLGA) nanoparticles were prepared by nanoprecipitation method and characterized. The full factorial experimental design was used to study the influence of four different independent variables on response of nanoparticle drug loading. Analysis of variance (ANOVA) was used to evaluate optimized conditions for the preparation of nanoparticles. The physical characteristics of PLGA nanospheres were evaluated using particle size analyzer, scanning electron microscopy, differential scanning calorimetry and X-ray diffractometry. The results of optimized formulations showed a narrow size distribution with a polydispersity index of 0.01%, an average diameter of 207+/-26 nm, and a drug loading of more than 30%. The in vitro drug release profile showed a sustained 9-NC release up to 160 h indicating the suitability of PLGA nanoparticles in controlled 9-NC release. Thus prepared nanoparticles described here may be of clinical importance in both stabilizing and delivering camptothecins for cancer treatment.     

Controlled release pulmonary administration of curcumin using swellable biocompatible microparticles

This study involves a promising approach to achieve sustained pulmonary drug delivery. Dry powder particulate carriers were engineered to allow simultaneous aerosol lung delivery, evasion of macrophage uptake, and sustained drug release through a controlled polymeric architecture. Chitosan grafted with PEG was synthesized and characterized (FTIR, EA, DSC and 2D-XRD). Then, a series of respirable amphiphilic hydrogel microparticles were developed via spray drying of curcumin-loaded PLGA nanoparticles with chitosan-grafted-PEG or chitosan. The nanoparticles and microparticles were fully characterized using an array of physicochemical analytical methods including particle size, surface morphology, dynamic swelling, density, moisture content and biodegradation rates. The PLGA nanoparticles and the hydrogel microspheres encapsulating the curcumin-loaded PLGA nanoparticles showed average size of 221-243 nm and 3.1-3.9 μm, respectively. The developed carriers attained high swelling within a few minutes and showed low moisture content as dry powders (0.9-1.8%), desirable biodegradation rates, high drug loading (up to 97%), and good sustained release. An aerosolization study was conducted using a next generation impactor, and promising aerosolization characteristics were shown. In vitro macrophage uptake studies, cytotoxicity and in vitro TNF-α assays were performed for the investigated particles. These assays revealed promising biointeractions for the respirable/swellable nano-micro particles developed in this study as potential carriers for sustained pulmonary drug delivery.     

Chemico-physical investigation of tenofovir loaded polymeric nanoparticles

Tenofovir (PMPA), an acyclic nucleoside phosphonate analog, is one of the most important drugs used for the HIV treatment. Unfortunately, several adverse reactions are related to its i.v. administration owing to the saturation of an anionic renal transporter. In order to improve the drug administration, the PMPA was embedded into a new type of nanocarriers based on poly-(d,l-lactide-co-glycolide) (PLGA) and/or chitosan (CH). The strategies for the preparation of nanoparticles (Nps) with a more efficient drug loading respect to the one reported in the literature for PMPA nanoencapsulation were investigated. CH was added in the first inner emulsion or in the external phase during the second emulsion of water/oil/water (W/O/W) Nps. The addition of CH in the first inner emulsion was the most promising technique. The Nps have a Z-average of 230nm, a Z-potential of -3mV and an EE% of 15 that was 2.5-3 times higher than that obtained with PLGA Nps or CH Nps. In vitro release studies showed a limited control on drug release in phosphate buffer (pH 7.4) while an initial burst effect followed by a slow drug release was observed in acidic receiving phase (pH 4.6). These results suggest the PLGA/CH Nps should be an effective and attractive anti-HIV drug carrier to study the cellular uptake and drug delivery on target cells such as macrophages.     

Nimodipine loaded PLGA nanoparticles: formulation optimization using factorial design, characterization and in vitro evaluation

The present study was aimed at developing a sustained release formulation of Nimodipine (NIM) nanoparticles using the biodegradable polymers, poly (lactide-co-glycolide) (PLGA 50:50 and 85:15) as carrier. NIM is a widely used calcium channel blocker which has to be administered as an intravenous infusion for a prolonged period of 1-2 weeks in the treatment of cerebral vasospasm. A sustained release biodegradable formulation would serve to replace this conventional therapy of continuous intravenous administration. PLGA nanoparticles were prepared by a modified precipitation method using high pressure homogenizer at 10,000 to 14,000 psi. A 3(2) factorial design was applied for optimization of the formulation parameters and for studying the effect of two independent variables [drug: polymer ratio and concentration of surfactant (Pluronic F 127)] on entrapment efficiency and mean particle size (response variables). Contour plots were plotted which gave a visual representation of the two variables on the dependent variables and also indicated non-linear relationship between them. The nanoparticles had particle size of 131+/-1.9 nm for PLGA 50:50 and 196+/-2.2 nm for PLGA 85:15. Scanning Electron Microscopy studies indicated that nanoparticles had spherical shape with a regular surface. The nanoparticles had high entrapment efficiency (96.42+/-2.09% for PLGA 50:50 and 94.50+/-1.25% for PLGA 85:15). DSC thermograms indicated that NIM was dispersed as an amorphous state in the nanoparticles. In vitro drug release from the lyophilized nanoparticles showed 94.35 +/- 3.8% NIM release from PLGA (50:50) nanoparticles and 63.32 +/- 4.6% release from PLGA (85:15) nanoparticles in 25 days. The release was first ordered and fickian diffusion kinetics in both the cases. These preliminary results indicate that NIM loaded PLGA nanoparticles could be effective in sustaining its release for a prolonged period. However, further studies are needed to confirm its performance in vivo.     

无稳定剂修饰的汉防己甲素PLGA纳米粒制备及体外评价

目的:制备无稳定剂修饰的汉防己甲素PLGA纳米粒,研究其理化性质及细胞毒和细胞摄取特性。方法:以聚乳酸-羟基醋酸共聚物(PLGA)为载体材料,采用无稳定剂修饰的纳米沉淀法制备汉防己甲素纳米粒;通过单因素试验考察不同制备工艺对纳米粒理化性质的影响;通过载药量、包封率、累积释药量等指标考察其载药特性;采用MTT比色法检测其对人肺腺癌细胞株A549的细胞毒性;采用共聚焦显微镜技术考察其细胞摄取特性。结果:无稳定剂修饰的汉防己甲素PLGA纳米粒平均粒径169.3 nm,与有稳定剂的汉防己甲素PLGA纳米粒相比外观无明显改变。在一定范围内,随着PLGA用量的增加,纳米粒的粒径呈上升趋势;随着投药量的增加,纳米粒的载药量显著增加,包封率下降。在pH7.4的释放介质中,纳米粒释慢释药,96 h累积释药率60.44%。细胞毒试验显示,当培养时间为8 h时,汉防己甲素组的细胞毒性大于汉防己甲素纳米粒组;当培养时间延长至24 h时,汉防己甲素纳米粒组的细胞活性明显低于纯药物组;高剂量的空白纳米粒组始终表现较低的细胞毒性。激光共聚焦电镜断层扫描显示汉防己甲素纳米粒能够较好的被细胞摄取。结论:制备的无稳定剂修饰的汉防己甲素PLGA纳米粒大小均一,包封率高,体外释药表现出较好的缓释效果,易被细胞摄取,对A549细胞的增殖有明显的抑制作用。     

PEG-derivative effectively modifies the characteristics of indomethacin-PLGA microspheres destined to intra-articular administration

The aim of this study was to obtain biodegradable indomethacin microspheres for intra-articular administration in rheumatoid arthritis, where angiogenic processes are involved. Indomethacin concentrations to achieve an anti-angiogenic effect would be five-times higher than an anti-inflammatory. Microspheres were prepared by solvent evaporation using PLGA. Indomethacin is a poor water-soluble drug with it being possible that dissolved and non-dissolved drug co-exist within the polymeric matrix resulting in rapid release. To control this release, an oil-PEG-derivative was incorporated, producing changes in morphology, crystallinity and indomethacin release. To minimize the amount of microspheres administered, a two-factor five-level central rotable composite 2(2)+star design was employed with two independent variables: indomethacin percentage and PEG-derivative percentage. The optimum formulation showed mean encapsulation efficiency of 94.3+/-2.2% and released 7.99+/-0.25 microg indomethacin/day/mg microspheres for 21 days. A dose of 20-50 mg of this formulation could be appropriate to achieve both anti-angiogenic and anti-inflammatory effects. Preliminary cytotoxicity studies performed in rat splenocytes showed an adequate cell viability.     

Long circulating nanoparticles of etoposide using PLGA‐MPEG and PLGA‐pluronic block copolymers: characterization,drug‐release,blood‐clearance,and biodistribution studies

The anti‐leukemic drug, etoposide (ETO), has variable oral bioavailability ranging from 24–74% with a short terminal half‐life of 1.5 h i.v. necessitating continuous infusion for 24–34 h for the treatment of leukemia. In the present study, etoposide‐loaded PLGA‐based surface‐modified nanoparticles (NPs) with long circulation were designed as an alternative to continuous i.v. administration. PLGA‐mPEG and PLGA‐PLURONIC copolymers were synthesised and used to prepared ETO‐loaded NPs by high‐pressure homogenization. The mean particle size of ETO‐loaded PLGA‐MPEG nanoparticles was 94.02±3.4 nm, with an Entrapment Efficiency (EE) of 71.2% and zeta potential value of −6.9±1.3 mV. ETO‐loaded PLGA‐pluronic nanoparticles had a mean particle size of 148.0±2.1 nm, an EE of 73.12±2.7%, and zeta potential value of −21.5±1.6 mV. In vitro release of the pure drug was complete within 4 h, but was sustained up to 7 days from PLGA‐mPEG nanoparticles and for 5 days from PLGA‐pluronic nanoparticles. Release was first order and followed non‐Fickian diffusion kinetics in both instances. ETO and ETO‐loaded PLGA nanoparticles labeled with ^99mTc were used in blood clearance studies in rats where the two coated NPs, ^99mTc‐ ETO‐PLGA‐PLU NP and ^99mTc‐ ETO‐PLGA‐mPEG NP, were found to be available in higher concentrations in the circulation as compared to the pure drug. Biodistribution studies in mice showed that ETO‐loaded PLGA‐MPEG NP and PLGA‐PLURONIC NP had reduced uptake by the RES due to their steric barrier properties and were present in the circulation for a longer time. Moreover, the NPs had greater uptake in bone and brain where concentration of the free drug, ETO, was negligible. Drug delivered from these NPs could result in a single i.v. injection that would release the drug for a number of days, which would be potentially beneficial and in better control of leukemia therapy. Drug Dev Res 71: 228–239, 2010. © 2010 Wiley‐Liss, Inc.     

Production of haloperidol-loaded PLGA nanoparticles for extended controlled drug release of haloperidol

This study developed an emulsion-solvent evaporation method for producing haloperidol-loaded PLGA nanoparticles with up to 2% (wt/wt. of polymer) drug content, in vitro release duration of over 13 days and less than 20% burst release. The free haloperidol is removed from the nanoparticle suspension using a novel solid phase extraction technique. This leads to a more accurate determination of drug incorporation efficiency than the typical washing methods. It was discovered that PLGA end groups have a strong influence on haloperidol incorporation efficiency and its release from PLGA nanoparticles. The hydroxyl-terminated PLGA (uncapped) nanoparticles have a drug incorporation efficiency of more than 30% as compared to only 10% with methyl-terminated PLGA (capped) nanoparticles. The in vitro release profile of nanoparticles with uncapped PLGA has a longer release period and a lower initial burst as compared to capped PLGA. By varying other processing and materials parameters, the size, haloperidol incorporation and haloperidol release of the haloperidol-loaded PLGA nanoparticles were controlled.     

PEG-derivative effectively modifies the characteristics of indomethacin-PLGA microspheres destined to intra-articular administration

The aim of this study was to obtain biodegradable indomethacin microspheres for intra-articular administration in rheumatoid arthritis, where angiogenic processes are involved. Indomethacin concentrations to achieve an anti-angiogenic effect would be five-times higher than an anti-inflammatory. Microspheres were prepared by solvent evaporation using PLGA. Indomethacin is a poor water-soluble drug with it being possible that dissolved and non-dissolved drug co-exist within the polymeric matrix resulting in rapid release. To control this release, an oil-PEG-derivative was incorporated, producing changes in morphology, crystallinity and indomethacin release. To minimize the amount of microspheres administered, a two-factor five-level central rotable composite 2²?+?star design was employed with two independent variables: indomethacin percentage and PEG-derivative percentage. The optimum formulation showed mean encapsulation efficiency of 94.3?±?2.2% and released 7.99?±?0.25?µg indomethacin/day/mg microspheres for 21 days. A dose of 20–50?mg of this formulation could be appropriate to achieve both anti-angiogenic and anti-inflammatory effects. Preliminary cytotoxicity studies performed in rat splenocytes showed an adequate cell viability.     

Surfactant-free poly(lactide-co-glycolide) nanoparticles for improving in vitro anticancer efficacy of tetrandrine

The objective of this study was to improve the efficacy of a natural compound tetrandrine against cancer by designing surfactant-free poly(lactic-co-glycolic acid) (PLGA) nanoparticles as drug carriers for tetrandrine. Nanoparticles were prepared from PLGA via the nano-precipitation method with or without the presence of surfactant poly(vinyl alcohol) (PVA) to encapsulate tetrandrine. Tetrandrine-loaded surfactant-free PLGA nanoparticles had an average particle size of 169.3?nm and morphology similar to the PLGA nanoparticles prepared using PVA as the surfactant. Tetrandrine-loaded surfactant-free PLGA nanoparticles could retard drug release in phosphate buffered saline (PBS) at pH 7.4 and the cumulative release of tetrandrine reached up to 68.33% over a period of 120?h. A549 cell line was used as the model cancer cells to investigate anticancer capability of tetrandrine-loaded surfactant-free PLGA nanoparticles via apoptosis assay, cytotoxicity and lysosome injury studies. The results showed that tetrandrine-loaded surfactant-free PLGA nanoparticles could effectively reduce cell viability and synergistically enhance tetrandrine-induced cell apoptosis.     

Clonazepam release from poly(DL-lactide-co-glycolide) nanoparticles prepared by dialysis method

Aim of this work is to prepare poly(DL-lactide-co-glycolide) (PLGA) nanoparticles by dialysis method without surfactant and to investigate drug loading capacity and drug release. The size of PLGA nanoparticles was 269.9±118.7 nm in intensity average and the morphology of PLGA nanoparticles was spherical shape from the observation of SEM and TEM. In the effect of drug loading contents on the particle size distribution, PLGA nanoparticles were monomodal pattern with narrow size distribution in the empty and lower drug loading nanoparticles whereas bi- or trimodal pattern was showed in the higher drug loading ones. Release of clonazepam from PLGA nanoparticles with higher drug loading contents was slower than that with lower loading contents.     

Preparation and Characterization of Docetaxel-PLGA Nanoparticles Coated with Folic Acid-chitosan Conjugate for Cancer Treatment

The conjugation of chitosan (CS) and folic acid (FA) was prepared and used to coat PLGA nanoparticles (NPs) that are loaded with Docetaxel (DTX) to target cancer cells that have lower pH and overexpression of folate receptors in comparison to normal cells. Three formulations had been prepared to reach the highest loading capacity (LC%) and encapsulation efficiency (EE%) and to study the effect of the amount of FA-CS on the drug release. The sizes, charges, homogeneity, surface morphology, LC% and EE% of the NPs were determined. The NPs were characterized using FTIR and XRD. In vitro release profiles of DTX from PLGA NPs, at pH 5.5 and 7.4 were determined. Finally, in vitro cytotoxicity assay on three cancer cell lines (RPMI 2650, Calu-3, and A549) was studied. The sizes of the three formulations ranged between 250.3±1.7 and 356.3±17.7. All prepared formulations showed acceptable monodispersity with highly positive charges. The EE% was above 85% and the LC% ranged between 6-35%. The in vitro release of DTX show an inverse relation to the amounts of FA-CS used and the pH of the dissolution medium. Coated PLGA NPs showed a significant difference in RPMI 2650, Calu-3, and A549 cell viability in comparison to free DTX. The NPs components were safe and non-toxic to human cells. In conclusion, coating PLGA NPs with FA-CS may be used as a good carrier for chemotherapeutic agents that selectively target carcinogenic tissues.     

Polymeric nanoencapsulation of zaleplon into PLGA nanoparticles for enhanced pharmacokinetics and pharmacological activity

Zaleplon (ZP) is a sedative and hypnotic drug used for the treatment of insomnia. Despite its potent anticonvulsant activity, ZP is not commonly used for the treatment of convulsion since ZP is characterized by its low oral bioavailability as a result of poor solubility and extensive liver metabolism. The following study aimed to formulate specifically controlled release nano‐vehicles for oral and parenteral delivery of ZP to enhance its oral bioavailability and biological activity. A modified single emulsification–solvent evaporation method of sonication force was adopted to optimize the inclusion of ZP into biodegradable nanoparticles (NPs) using poly (dl‐lactic‐co‐glycolic acid) (PLGA). The impacts of various formulation variables on the physicochemical characteristics of the ZP‐PLGA‐NPs and drug release profiles were investigated. Pharmacokinetics and pharmacological activity of ZP‐PLGA‐NPs were studied using experimental animals and were compared with generic ZP tablets. Assessment of gamma‐aminobutyric acid (GABA) level in plasma after oral administration was conducted using enzyme‐linked immunosorbent assay. The maximal electroshock‐induced seizures model evaluated anticonvulsant activity after the parenteral administration of ZP‐loaded NPs. The prepared ZP‐PLGA NPs were negatively charged spherical particles with an average size of 120–300 nm. Optimized ZP‐PLGA NPs showed higher plasma GABA levels, longer sedative, hypnotic effects, and a 3.42‐fold augmentation in oral drug bioavailability in comparison to ZP‐marketed products. Moreover, parenteral administration of ZP‐NPs showed higher anticonvulsant activity compared to free drug. Oral administration of ZP‐PLGA NPs achieved a significant improvement in the drug bioavailability, and parenteral administration showed a pronounced anticonvulsant activity.     

Antirheumatic agents and leukocyte recruitment. New light on the mechanism of action of oxaceprol.

Most anti-inflammatory agents used in the treatment of joint diseases exert inhibitory effects on leukocyte infiltration. Methotrexate, a disease-modifying drug, and corticosteroids also inhibit leukocyte accumulation during inflammation. However, the mechanisms of action of these different compounds on leukocytes vary and in the case of non-steroidal anti-inflammatory drugs (NSAIDs) the mechanism(s) may be indirect. No current drug for inflammatory or degenerative joint disease has been proposed to act specifically by an inhibitory action on neutrophilic leukocytes. Oxaceprol is an amino acid derivative that has been used for several years for the treatment of osteoarthritis and rheumatoid arthritis, ameliorating pain and stiffness and showing good gastrointestinal safety, particularly in comparison with NSAIDs. Recent experimental studies have shown that oxaceprol does not inhibit the synthesis of prostaglandins in vitro, but markedly inhibits neutrophil infiltration into the joints of rats with adjuvant arthritis. These results support earlier screening data showing inhibition by oxaceprol of leukocyte infiltration into sites of acute inflammation. In studies on surgical ischemia reperfusion in hamsters in vivo, oxaceprol was an effective inhibitor of leukocyte adhesion and extravasation. It is proposed that oxaceprol represents a therapeutic agent for degenerative and inflammatory joint diseases, which acts predominantly by inhibiting leukocyte adhesion and migration.     

Penetration and distribution of PLGA nanoparticles in the human skin treated with microneedles

This study was designed to investigate the penetration and the distribution of poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles in the human skin treated with microneedles. Fluorescent nanoparticles were prepared to indicate the transdermal transport process of the nanoparticles. Permeation study was performed on Franz-type diffusion cells in vitro. The distribution of nanoparticles was visualized by confocal laser scanning microscopy (CLSM) and quantified by high performance liquid chromatography (HPLC). CLSM images showed that nanoparticles were delivered into the microconduits created by microneedles and permeated into the epidermis and the dermis. The quantitative determination showed that (i) the permeation of nanoparticles into the skin was enhanced by microneedles, but no nanoparticle reached the receptor solution; (ii) much more nanoparticles deposited in the epidermis than those in the dermis; (iii) the permeation was in a particle size-dependent manner; and (iv) the permeation increased with the nanoparticle concentration increasing until a limit value was reached. These results suggested that microneedles could enhance the intradermal delivery of PLGA nanoparticles. The biodegradable nanoparticles would sustain drug release in the skin and supply the skin with drug over a prolonged period. This strategy would prove to be useful for topical drug administration.     

Doxorubicin release from core-shell type nanoparticles of poly(DL-lactide-co-glycolide)-grafted dextran

In this study, we prepared core-shell type nanoparticles of a poly(DL-lactide-co-glycolide) (PLGA) grafted-dextran (DexLG) copolymer with varying graft ratio of PLGA. The synthesis of the DexLG copolymer was confirmed by 1H nuclear magnetic resonance (NMR) spectroscopy. The DexLG copolymer was able to form nanoparticles in water by self-aggregating process, and their particle size was around 50 nm approximately 300 nm according to the graft ratio of PLGA. Morphological observations using a transmission electron microscope (TEM) showed that the nanoparticles of the DexLG copolymer have uniformly spherical shapes. From fluorescence probe study using pyrene as a hydrophobic probe, critical association concentration (CAC) values determined from the fluorescence excitation spectra were increased as increase of DS of PLGA. 1H-NMR spectroscopy using D2O and DMSO approved that DexLG nanoparticles have core-shell structure, i.e. hydrophobic block PLGA consisted inner-core as a drug-incorporating domain and dextran consisted as a hydrated outershell. Drug release rate from DexLG nano-particles became faster in the presence of dextranase in spite of the release rate not being significantly changed at high graft ratio of PLGA. Core-shell type nanoparticles of DexLG copolymer can be used as a colonic drug carrier. In conclusion, size, morphology, and molecular structure of DexLG nanoparticles are available to consider as an oral drug targeting nanoparticles.     

Ciprofloxacin-encapsulated poly(DL-lactide-co-glycolide) nanoparticles and its antibacterial activity

The aim of this study was to prepare ciprofloxacin HCl (CIP)-encapsulated poly(dl-lactide-co-glycolide) (PLGA) copolymer nanoparticles and its antibacterial potential was evaluated with pathogenic bacteria, Escherichia coli (E. coli), in vitro and in vivo. CIP-encapsulated nanoparticles of PLGA were prepared by multiple emulsion solvent evaporation method. PLGA nanoparticles showed spherical shapes with particle sizes around 100-300 nm. Loading efficiency was lower than 50% (w/w) because of water-solubility properties of CIP. At drug release study, CIP showed initial burst effect for 12 h and then continuously released for 2 weeks. At in vitro antibacterial activity test, CIP-encapsulated nanoparticles showed relatively lower antibacterial activity compared to free CIP due to the sustained release characteristics of nanoparticles. However, CIP-encapsulated PLGA nanoparticles (doses: 25 mg CIP/kg of mice) effectively inhibited the growth of bacteria due to the sustained release characteristics of nanoparticles, while free CIP was less effective on the inhibition of bacterial growth. These results indicated that CIP-encapsulated PLGA nanoparticles have superior effectiveness to inhibit the growth of bacteria in vivo.