Ten-year results after cementless THA with a sandwich-type alumina ceramic bearing

We analyzed the long-term results of a single-surgeon series of 102 cementless total hip arthroplasties (THAs) performed using a sandwich-type alumina ceramic bearing. The prostheses involved a porous-coated acetabular socket, a polyethylene-alumina composite liner, a 28-mm alumina head, and a grit-blasted titanium-alloy stem. Mean patient age at the time of THA was 39 years (range, 18-66 years), and 76% of the patients were younger than 50 years. All procedures were performed with use of the same surgical technique and the same implant at a single center. Mean follow-up was 115 months (range, 84-133 months). When failure was defined as revision of either the acetabular or the femoral component for any reason, Kaplan-Meier survival probability at 10 years was 95.3% (95% confidence interval, 89.5%-100%). Mean Harris Hip Score improved from 47 points (range, 16-70 points) preoperatively to 95 points (range, 85-100 points) at final follow-up. No radiographically detectable osteolysis around the acetabular or femoral component was observed in any hip. No patient reported squeaking in the operated hip. During the follow-up period, 3 hips (3%) required revision surgery; 2 underwent acetabular revision because of a ceramic liner fracture and 1 underwent revision for early loosening of the acetabular cup. Ten-year results of cementless THA with a sandwich-type alumina ceramic bearing were encouraging, and no great increase in ceramic failure rate was observed, which contrasts with the findings of previously reported short-term follow-up studies.     

人工全髋关节翻修术中骨缺损的处理

目的研究全髋关节翻修术中骨缺损的处理方法。方法1990年12月至1999年6月对16例一期行金属-聚乙烯假体全髋关节置换术失败患者行全髋关节翻修术。处理髋臼骨缺损的方式包括：（1）髂骨填充骨缺损（3例）,（2）骨水泥填充骨缺损（5例）,（3）异体颗粒骨打压植骨结合金属网重建髋臼（8例）,后两种方式均属骨水泥型。16例行全髋关节翻修术患者全部行髋臼翻修,其中10例同时行股骨柄翻修。所有患者均进行临床和影像学随访。结果所有患者均获得随访,随访时间4．1～7．7年,平均5．9年。Harris评分由全髋关节翻修术前的范围,62-75分,平均68分,升至术后的90—94分,平均91分。随访中均未出现假体旁透亮线、假臼杯水平或垂直移位和骨溶解等征象。共有4例出现并发症,包括异位骨化2例,脱位2例,无一例发生感染。结论有效修复髋臼骨缺损,进行髋部骨性结构的重建,是全髋关节翻修术成败的关键。     

10-year results of the uncemented Allofit press-fit cup in young patients

Background and purpose — Uncemented acetabular components in primary total hip arthroplasty (THA) are commonly used today, but few studies have evaluated their survival into the second decade in young and active patients. We report on a minimum 10-year follow-up of an uncemented press-fit acetabular component that is still in clinical use.

Methods — We examined the clinical and radiographic results of our first 121 consecutive cementless THAs using a cementless, grit-blasted, non-porous, titanium alloy press-fit cup (Allofit; Zimmer Inc., Warsaw, IN) without additional screw fixation in 116 patients. Mean age at surgery was 51 (21–60) years. Mean time of follow-up evaluation was 11 (10–12) years.

Results — At final follow-up, 8 patients had died (8 hips), and 1 patient (1 hip) was lost to follow-up. 3 hips in 3 patients had undergone acetabular revision, 2 for deep infection and 1 for aseptic acetabular loosening. There were no impending revisions at the most recent follow-up. We did not detect periacetabular osteolysis or loosening on plain radiographs in those hips that were evaluated radiographically (n = 90; 83% of the hips available at a minimum of 10 years). Kaplan-Meier survival analysis using revision of the acetabular component for any reason (including isolated inlay revisions) as endpoint estimated the 11-year survival rate at 98% (95% CI: 92–99).

Interpretation — Uncemented acetabular fixation using the Allofit press-fit cup without additional screws was excellent into early in the second decade in this young and active patient cohort. The rate of complications related to the liner and to osteolysis was low.     

Ten- to Sixteen-Year Follow-Up of Highly Cross-Linked Polyethylene in Total Hip Arthroplasty: What Factors Affect Wear?

BackgroundIncrease in acetabular cup abduction in total hip arthroplasty (THA) using conventional polyethylene is associated with greater linear wear. Whether this relationship holds true for highly crosslinked liners, particularly with long-term follow-up, is still controversial. The effect of liner thickness on wear of highly cross-linked liners also remains to be clarified.This study sought to determine (1) the long-term clinical and radiological performance of highly cross-linked polyethylene in THA and (2) the effect of acetabular component positioning, polyethylene thickness, and patient demographics on wear.MethodsNinety-three THAs using a 28-mm hip ball, single brand of highly cross-linked polyethylene liner, and cementless cup were performed in 87 patients. Clinical outcomes were evaluated using the Harris Hip Score and need for revision surgery. Linear and volumetric wear, presence of osteolysis, and cup abduction angle were assessed.ResultsThe mean age at operation was 51.4 years. The mean duration of follow-up was 12.7 years (10-16 years). Patients aged >50 years had higher rates of linear wear than those aged <50 years (P = .015). Positive correlation was found between cup abduction angle (P = .014) and cup version (P = .035) with a linear wear rate. Thinner liners (≤7 mm) had similar rates of linear and volumetric wear as thicker liners (≥8 mm) (P = .447).ConclusionThis is the only study to demonstrate a positive significant relationship between cup abduction angle and version with linear wear rate in THA with at least 10 years of follow-up. Liner thickness was not found to affect wear rates.     

Trends in Total Hip Arthroplasty Implant Utilization in the United States

Total hip arthroplasty (THA) implant usage has evolved as experience has been gained with newer implant designs. The purpose of this study was to characterize trends in THA implant usage between 2001 and 2012. The Orthopedic Research Network, which includes 174 hospitals and ~ 105,000 THA, was used to evaluate trends in fixation, bearings, acetabular cup and liner, and femoral head usage. In 2012, 93% of THAs were cementless; 56% of THA bearings were metal-HXLPE; and 35% were ceramic-HXLPE. 99% of acetabular cups were modular. 61% of femoral heads were metal, 39% were ceramic, 51% were 36 mm, and 28% were 32 mm. THA implant usage trends favor cementless fixation, metal-on-polyethylene or ceramic-on-polyethylene bearings, modular acetabular cups, and large diameter femoral heads.     

Revision total hip arthroplasty with metal on metal bearing for ceramic bearing fractures

BackgroundDue to concern of potential metallosis caused by residual microscopic ceramic particles, metal-on-metal (MoM) bearing is deemed undesirable in revision total hip arthroplasty (THA) for ceramic bearing fracture. We determined whether MoM bearing is suitable to be used in revision THA for ceramic fractures and also evaluated whether this treatment increases serum iron levels compared with MoM bearing revision THA for polyethylene failure.MethodsBetween 2006 and 2012, 22 patients underwent revision surgery using MoM bearing (28 mm femoral head in 18 hips and 32 mm in 4 hips) for ceramic bearing fracture and followed average 52.1 months. We assessed radiological parameter and functional outcome using Harris hip score (HHS) and WOMAC score. Also, serum cobalt (Co) and chromium (Cr) blood tests were performed and compared with the result obtained from age, sex- and follow-up duration-matched patients with MoM revision THA for failed polyethylene bearing.ResultsThe mean HHS improved from 60.6 preoperatively to 90.3 at final follow-up. There were no changes in cup position, progression of osteolytic lesions, and measurable wear of MoM bearing articulation at final follow-up radiographs. There was one case of recurrent dislocation after surgery, which was treated with greater trochanter distal advancement and one case of deep infection, which underwent two-stage revision. Mean serum Co level (1.7 vs. 1.4 μg/dl; p = 0.211) and Cr level (0.70 vs. 1.01 μg/dl; p = 0.327) showed no significant difference.ConclusionsMoM articulation with liner cementation into the acetabular cup along with total synovectomy can be chosen in revision surgery for ceramic fracture with good midterm follow-up. However, the use of MoM bearing is indicated when the stem and metal shell can be retained and ceramic on ceramic or ceramic on polyethylene bearing cannot be selected. Also long-term outcome needs to be further evaluated.     

Fracture of a ceramic liner in a total hip arthroplasty with a sandwich cup

Alumina ceramic-on-ceramic total hip arthroplasty (THA) has been widely used due to its advantages such as low wear, scratch resistance, wettable surface and relatively low biological reactivity of the wear particles. Nevertheless, this material in THA still persists to be one of the major concerns about the risk of fracture, due to its brittleness. Many authors have reported a fracture of the ceramic head but few reported a fracture of the ceramic acetabular insert. In order to reduce the rigidity of the ceramic-on-ceramic coupling and prevent an impingement between the rim of the ceramic liner and the metal neck of the femoral stem, a modular acetabular component with a sandwich insertion (alumina/polyethylene/titanium) was proposed. We report the fracture of the ceramic acetabular liner of such a ceramic sandwich cup due to a slightly retroverted position of the cup that causes an impingement between the femoral stem and the rim of the insert. The fracture occurred 3 years after the operation without trauma. At revision the entire cup was replaced using a polyethylene liner without inner ceramic liner.     

Survivorship of rough-surfaced threaded acetabular cups 382: Consecutive primary Zweymiiller cups followed for 0.2-12 years

We studied prospectively 382 cementless (Zweymiiller stem) and hybrid (cemented stem) primary total hip replacements and used a cementless grit-blasted titanium alloy threaded cup. After a median 5 (0.2-12)-year follow-up, 1 cup was exchanged, 2 cups were removed for deep sepsis, and 3 cups showed definite loosening; of these, 2 subsequently required revision. Actuarial calculation methods indicated a 10-year survivorship of 99% with cup retrieval for any cause (clinical failure), definite cup-loosening (radiographic failure), and revision for aseptic cup-loosening as endpoints. These intermediate results exceed those from smooth-surfaced screw rings and compare favorably with those from cemented cups and cementless, press-fit, metal-backed cups.     

Anatomic placement of the acetabular implant in cementless total hip arthroplasty does not adversely affect the implant survival and patient satisfaction

ObjectiveThis study aimed to evaluate if the acetabulum's conservative reaming with preservation of the medial acetabular bone and anatomic placement of the acetabular implant in cementless total hip arthroplasty (THA) has any adverse effect on the radiological outcome, long term implant survival and patient satisfaction.Methods106 consecutive patients were identified from a single surgeon practice who underwent cementless THA from 2005 to 2010. Twenty-one were lost to follow up, and five patients died unrelated to THA. Eighty patients were available for the study. The mean follow-up was 8.6 years (range 5.7–11.6). The mean age was 61.9 years. Immediate pre- and postoperative radiographs were reviewed to calculate combined offset (Acetabular offset – AO, plus Femoral offset – FO). Implant failure, aseptic loosening, revision surgery, patient satisfaction and complications were assessed on long-term follow-up.ResultsAcetabular component survival was 100% with no aseptic failure. None of the patients had revision surgery for any cause. The mean difference in the acetabular offset and combined offset postoperatively was within 3 mm. One patient had a dislocation, and one had a prosthetic joint infection (PJI). 95% of the patients in this series would recommend the hip replacement procedure to others, with a mean satisfaction score of 8.7 (range; 1–10).ConclusionConservative acetabular reaming with preservation of medial acetabulum bone with the anatomic placement of the acetabular implant in cementless THA is safe with no adverse effects on implant survival and patient satisfaction. It offers the advantage of preserving the patient's bone stock, which would potentially be of significant advantage to the patient and the surgeon in case of revision arthroplasty.     

Clinical Outcomes and Midterm Survivorship of an Uncemented Primary Total Hip Arthroplasty System

BackgroundThe rise in total hip arthroplasty (THA) has led to a concomitant increase in revision THAs. Tracking implant performance therefore remains a significant element of scientific inquiry to garner and maintain public trust in this procedure. There are few available reports of outcomes of a single manufacturer’s total hip system outside registry data.MethodsWe performed a retrospective review of a prospectively generated database to evaluate outcomes of a single manufacturer’s femoral stem and acetabular shell for THA. We report the functional outcomes, revision data, and survivorship for this total hip system.ResultsA total of 1942 primary THAs were implanted into 1672 patients. There were of 57 revisions. There were no cases of acetabular failure at 10-year follow-up. All functional outcome scores demonstrated significant improvements following THA. Kaplan-Meier survival analysis for all-cause revisions demonstrated 2-year implant survival of 97.6% (95% confidence interval [CI], 96.9-98.3), 5-year implant survival of 97.3% (95% CI, 96.5-98.1), and 10-year implant survival of 97.0% (95% CI, 96.0-98.0). When infection was excluded, implant survivorship improved to 99.2% (95% CI, 98.8-99.6) at 2 years, 98.9% (95% CI, 98.5-99.4) at 5 years, and 98.7% (95% CI, 98.1-99.4) at 10 years.ConclusionThis THA implant system comprising an uncemented press-fit acetabulum used alongside a triple-tapered femoral stem is an excellent option for THA. Implant survivorship at 2, 5, and 10 years is among the best reported for any total hip system in the world.     

Dissociation of Acetabular Polyethylene Liners With a Morse Taper Design

BackgroundPolyethylene liner dissociation is an uncommon complication of hip replacement. Dissociation has been associated with particular acetabular component designs. This study reviewed acetabular liner dissociations in a specific modular cup with a Morse taper locking mechanism that has not been previously reported.MethodsThe senior author performed 655 primary total hip arthroplasties with one particular design of acetabular component using Class A polyethylene liners and metal head articulation. Cases with revision surgery performed for acetabular liner dissociation were reviewed.ResultsSeven of 655 patients with this cup underwent revision surgery for a dissociated liner. Liner dissociation occurred at a mean of 73 months postoperatively. Patients presented with new-onset hip pain or squeaking, 4 of which developed symptoms acutely. Two patients treated with polyethylene liner exchange into the same cup required a second revision surgery for recurrent dissociation.ConclusionPolyethylene liner dissociation is an infrequent but possible complication associated with modular acetabular components using a Morse taper locking. Providers should be vigilant with long-term follow-up of patients with this acetabular system for patient complaints of catching or squeaking. Patients treated for liner dissociation should not have a new liner placed into the same acetabular shell given the risk for further dissociation.     

Mid-Term Results After 517 Primary Total Hip Arthroplasties With a Shortened and Shoulderless Double-Taper Press-Fit Stem: High Rates of Aseptic Loosening

BackgroundShorter double-taper stems with reduced lateral shoulders facilitate implantation via the muscle-sparing direct anterior approach and are becoming increasingly popular. We observed an unusually high number of cases of aseptic loosening with the use of a modified stem. Therefore, the aim of this prospective single-center study was to assess safety and efficacy of this cementless stem.MethodsA total of 486 consecutive patients receiving 517 primary total hip arthroplasties using the MonoconMIS stem were prospectively followed up for a mean period of 5.29 years (standard deviation [SD], 1.47). Surgical and clinical data, complications, and revision surgeries were analyzed. The Western Ontario and McMaster Universities Arthritis Index (WOMAC) score was recorded before surgery and at one year and five years after surgery.ResultsThe overall 5-year implant survival rate was 95.2%. The individual component survival rates were 96.1% for the stem, 99.4% for the acetabular cup, and 99.0% for the isolated mobile component exchange. The most common reasons for revision were periprosthetic fracture (1.5%), aseptic stem loosening (1.4%), and infection (1.0%). The WOMAC score improved significantly from 49.57 (SD, 21.42) at baseline to 13.33 (SD, 16.47) at one year and 9.84 (SD, 14.45) at five years after surgery. Aseptic stem loosening occurred only in patients with Dorr type A proximal femur morphology.ConclusionThe evaluated femoral stem is associated with revision rates higher than what has been reported for other implants. The WOMAC scores suggest adequate efficacy. Our data do not support the use of the MonoconMIS for primary total hip arthroplasty in patients with Dorr type A proximal femur morphology.     

Conservative treatment of a traumatic periprosthetic acetabular fracture in alumina–alumina THA

A 45-year-old male patient sustained a traumatic periprosthetic acetabular fracture involving the posterior column after a hybrid alumina-on-alumina total hip arthroplasty (THA) with cementless metal-backed acetabular cup. The fracture was classified as unstable type-2 and was managed conservatively. At 5-year follow-up, the patient had normal activity. The X-rays showed no signs of loosening or osteolysis and demonstrated complete remodeling with congruous contour of the osseous bed of the component. We believe that if the resistance of the alumina implants to trauma is considered a real breakthrough, the cementless cup could be another benefit to avoid THA revision in type-2 acetabular fractures.     

Eleven- to 14-year follow-up results of cementless total hip arthroplasty using a third-generation alumina ceramic-on-ceramic bearing

To analyze long-term survivorship of cementless total hip arthroplasties (THAs) with the third-generation alumina ceramic-on-ceramic bearing, 100 consecutive THAs between 1996 and 1998 were reviewed. One cup and 2 stems were revised due to aseptic loosening. Another cup showed chipping of the acetabular liner at 8 years and required cup revision. The remaining hips showed stable bone ingrowth fixation with no osteolysis at the final follow-up. The 14-year survivorship as the end point of revision was 97.9% for the cup, 97.8% for the stem, and 95.7% for the overall implants, respectively. We conclude that cementless THA with the third-generation ceramic-on-ceramic hip bearing provided an excellent survivorship and eliminated periprosthetic osteolysis for 11 to 14 years.     

Fixation and Wear With a Contemporary Acetabular Component and Cross-Linked Polyethylene at Minimum 10-Year Follow-Up

Long term total hip arthroplasty follow-up has demonstrated bearing surface wear and failure of fixation as the major modes of failure. The purpose of this study was to evaluate the minimum 10 year results of a third generation cementless acetabular component using moderately cross-linked polyethylene liners. 150 primary THAs were evaluated clinically for need for revision and activity evaluated using accelerometers, WOMAC, Tegner and UCLA activity-level scores. Radiographs were evaluated for wear, osteolysis and loosening. We compared this cohort to three of our previously reported cohorts. The only revision was unrelated to liner wear and all acetabular components were bone ingrown. There were no cases of acetabular osteolysis and one case of femoral osteolysis. Average steps per year were 1.59 million. Mean steady state wear rate averaged 0.04 mm/year. At 10-years, excellent fixation and low wear were demonstrated using a cementless acetabular construct and moderately cross-linked polyethylene liner.     

Ten- to 16-Year Results of a Modern Cementless Dual-Mobility Acetabular Implant in Primary Total Hip Arthroplasty

BackgroundThe purpose of this study is to assess the radiographic results, clinical outcomes, and survivorship of a modern cementless dual-mobility cup (DMC) implant as a primary THA with a minimum of 10 years follow-up.MethodsThis study retrospectively assessed a series of 310 primary THAs using a modern-generation cementless DMC (Saturne acetabular cup) between April 2001 and December 2005 at a single center. Patients were followed prospectively clinically and radiographically after surgery. Hips with follow-up less than 120 months were excluded from the study (5 lost to follow-up and 167 deceased). In total, a cohort of 138 hips were included for preoperative and postoperative analysis with an average follow-up of 152.4 months. All complications were collected, and a Kaplan-Meier survival analysis was performed.ResultsThere was a significant increase in the mean Harris and Postel-Merle d’Aubigne scores between preoperative and postoperative cohorts (P < .001). No loosening of the cup and no acetabular osteolysis were found at final follow-up. No prosthetic dislocation, no intraprosthetic dislocation, and no infections were reported. The survival curve of THA in the total cohort (N = 310) was about 98% at 10 years with 3 stem revisions for femoral fracture. One psoas impingement was also described.ConclusionThis study showed no acetabular component failure and no reported cases of acetabular osteolysis with this DMC acetabular component retention at 10 years. No prosthetic or intraprosthetic dislocation was reported.     

Mid-term Follow-up of the Direct Anterior Approach in Acetabular Revision Hip Arthroplasty Using a Reconstruction Cage With Impaction Grafting

BackgroundSevere acetabular bone loss is often treated with reconstruction cages and impaction grafting using allograft bone. Accurate implant positioning is crucial for successful clinical and radiological outcomes. The direct anterior approach (DAA) is a standard approach for primary total hip arthroplasty (THA) that is being used more frequently for revision THA. The aim of this study was to report midterm clinical and radiological outcomes of acetabular revision arthroplasty using the DAA to address large acetabular defects by using a reconstruction cage and impaction grafting.MethodsAcetabular cup revisions were performed in 64 patients (64 hips) with severe acetabular bone loss. All patients received reconstruction cages with impaction grafting via the DAA. The stem was also revised in 22 patients. Complications, radiological, and functional outcomes were assessed.ResultsSix of the 64 patients were revised at a mean follow-up of 27.6 months (range, 11-84 months), two each for implant failure, infection, and recurrent dislocation. One hip showed the radiological failure of the implant, but the patient was asymptomatic and was not revised. The median Western Ontario McMasters Osteoarthritis Score (WOMAC) for the cohort overall improved significantly (P < .01) by the latest follow-up compared with preoperative scores.ConclusionGood midterm outcomes can be obtained with the DAA for acetabular cup revisions done to address severe acetabular bone loss by using reconstruction cages and impaction grafting. The number of complications was within the expected range for this type of revision procedure at midterm follow-up, and dislocation rates were low.     

Cause-Specific Stem Revision Risk in Primary Total Hip Arthroplasty Using Cemented vs Cementless Femoral Stem Fixation in a US Cohort

BackgroundWe sought to evaluate the cause-specific revision risk following hybrid (cemented stem mated to a cementless acetabular implant) vs cementless total hip arthroplasty (THA) in a US cohort.MethodsPrimary elective THA for osteoarthritis was identified using Kaiser Permanente’s Total Joint Replacement Registry (2001-2018). Multivariable Cox regression was used to evaluate cause-specific revision, including aseptic loosening, infection, instability, and periprosthetic fracture (PPF), for hybrid vs cementless THA. Analysis was stratified by age (<65, 65-74, and ≥75 years) and gender.ResultsThe study cohort comprised 88,830 THAs, including 4539 (5.1%) hybrid THAs. In stratified analysis, hybrid THA had a higher revision risk for loosening in females in all 3 age subgroups. A lower risk of revision for PPF was observed following hybrid THA in females aged ≥75 years. For females ≥75 years, cementless THA had an excess PPF risk of 0.9% while hybrid THA had an excess loosening risk of 0.2%, translating to a theoretical prevention of 10 PPF revisions but a price of 3 loosening revisions per 1000 hybrid THAs. No difference in revision risk was observed in males.ConclusionWe observed differences in cause-specific revision risks by method of stem fixation which depended upon patient age and gender. Although the trend toward all cementless fixation continue, there may be a role for hybrid fixation in females ≥75 years to mitigate risk for revision due to PPF at the potential cost of a slight increase in longer term aseptic loosening.Level of EvidenceLevel III.     

Fixation Stability of Uncemented Acetabular Cups With Respect to Different Bone Defect Sizes

BackgroundIn total hip arthroplasty, acetabular press-fit cups require a proper bone stock for sufficient primary implant fixation. The presence of acetabular bone defects compromises the primary fixation stability of acetabular press-fit cups. The aim of the present study is to determine the fixation stability of a cementless acetabular cup regarding standardized bone defects in an experimental setup.MethodsAn acetabular defect model was developed and transferred to a biomechanical cup-block model. The lack of superior cup coverage was divided into 4 stages of superior rim loss (33%, 50%, 67%, and 83%) in the anterior-posterior direction and into 4 stages of mediolateral wall absence (11%, 22%, 33%, and 50%). This resulted in 11 different defect cavities, which were compared to the intact cavity in push-in and lever-out tests of one press-fit cup design (56 mm outer diameter). Thereby, push-in force, lever-out moment, lever-out angle, and interface stiffness were determined.ResultsThe determined lever-out moments range from 15.53 ± 1.38 Nm (intact cavity) to 1.37 ± 0.54 Nm (83%/50% defect). Smaller defects (33%/11%, 33%/22%, and 50%/11%) reduce the lever-out moments by an average of 33.9% ± 2.8%.ConclusionThe lack of mediolateral acetabular coverage of 50% was assessed as critical for cementless cup fixation, whereby the contact zone between implant and bone in the defect is lost. A lack of 20% to 30% mediolateral coverage appears to be acceptable for press-fit cup fixation in the presence of primary stability. A defect of 50%/50% was identified as the threshold for using additional fixation methods.     

Minimum 30-Year Results of Bilaterally Implanted Cemented and Cementless Total Hip Arthroplasty in Patients Younger Than 50 Years

BackgroundThe rate of failure of cemented and cementless total hip arthroplasty (THA) in younger patients is higher than that in elderly patients. The purpose of this study is to document the long-term clinical results of THA with the so-called third-generation cementing and the results of second-generation cementless THA in patients <50 years of age.MethodsThis study included 106 patients who had had bilateral THA with a cemented stem in one hip and a cementless stem in the other. There were 78 men and 28 women. Their mean age was 47 years (range, 21-49). The average follow-up duration was 31 years (range, 30-32.5).ResultsThere were similar mean Harris Hip Scores (90 versus 91 points) between the groups at the final follow-up. Forty-six acetabular components (43%) in the cemented group and 48 acetabular components (45%) in the cementless group were revised. Five femoral components (5%) in the cemented group and 4 femoral components (4%) in the cementless group were revised. Survivorship of the acetabular component at 30.8 years was similar in both groups (57% in the cemented group versus 55% in the cementless group). Survivorship of the femoral component at 30.8 years was also similar in both groups (95% in the cemented group versus 96% in the cementless group).ConclusionLong-term fixation of the cemented or cementless femoral stem was outstanding. There was a high rate of the acetabular component revision due to conventional polyethylene wear and periacetabular osteolysis in both hybrid and fully cementless THA groups.