Effects of osteogenic growth factors on bone marrow stromal cell differentiation in a mineral-based delivery system

Delivering growth factors from bone-like mineral combines osteoinductivity with osteoconductivity. The effects of individual and sequential exposure of BMP-2 and FGF-2 on osteogenic differentiation, and their release from apatite were studied to design a dual delivery system. Bone marrow stromal cells were seeded on TCPS with the addition of FGF-2 (2.5, 10, 40 ng/ml) or BMP-2 (50, 150, 450 ng/ml) for 6 days. DNA content and osteogenic response were examined weekly for 3 weeks. FGF-2 increased DNA content; however, high concentrations of FGF-2 inhibited/delayed osteogenic differentiation, while a threshold concentration of BMP-2 was required for significant osteogenic enhancement. The sequence of delivery of BMP-2 (300 ng/ml) and FGF-2 (2.5 ng/ml) also had a significant impact on osteogenic differentiation. Delivery of FGF-2 followed by BMP-2 or delivery of BMP-2 followed by BMP-2 and FGF-2 enhanced osteogenic differentiation compared to the simultaneous delivery of both factors. Release of BMP-2 and FGF-2 from bone-like mineral was significantly affected by the concentration used during coprecipitation. BMP-2 also demonstrated a higher “burst” release compared to FGF-2. By integrating the results of the sequential delivery of BMP-2 and FGF-2 in solution, with the release of individual growth factors from mineral, an organic/inorganic delivery system based on coprecipitation can be designed for multiple biomolecules.     

Incorporation of a sequential BMP-2/BMP-7 delivery system into chitosan-based scaffolds for bone tissue engineering

The aim of this study was to develop a 3-D construct carrying an inherent sequential growth factor delivery system. Poly(lactic acid-co-glycolic acid) (PLGA) nanocapsules loaded with bone morphogenetic protein BMP-2 and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocapsules loaded with BMP-7 made the early release of BMP-2 and longer term release of BMP-7 possible. 3-D fiber mesh scaffolds were prepared from chitosan and from chitosan–PEO by wet spinning. Chitosan of 4% concentration in 2% acetic acid (CHI4–HAc2) and chitosan (4%) and PEO (2%) in 5% acetic acid (CHI4–PEO2–HAc5) yielded scaffolds with smooth and rough fiber surfaces, respectively. These scaffolds were seeded with rat bone marrow mesenchymal stem cells (MSCs). When there were no nanoparticles the initial differentiation rate was higher on (CHI4–HAc2) scaffolds but by three weeks both the scaffolds had similar alkaline phosphatase (ALP) levels. The cell numbers were also comparable by the end of the third week. Incorporation of nanoparticles into the scaffolds was achieved by two different methods: incorporation within the scaffold fibers (NP–IN) and on the fibers (NP–ON). It was shown that incorporation on the CHI4–HAc2 fibers (NP–ON) prevented the burst release observed with the free nanoparticles, but this did not influence the total amount released in 25 days. However NP–IN for the same fibers revealed a much slower rate of release; ca. 70% released at the end of incubation period. The effect of single, simultaneous and sequential delivery of BMP-2 and BMP-7 from the CHI4–HAc2 scaffolds was studied in vitro using samples prepared with both incorporation methods. The effect of delivered agents was higher with the NP–ON samples. Delivery of BMP-2 alone suppressed cell proliferation while providing higher ALP activity compared to BMP-7. Simultaneous delivery was not particularly effective on cell numbers and ALP activity. The sequential delivery of BMP-2 and BMP-7, on the other hand, led to the highest ALP activity per cell (while suppressing proliferation) indicating the synergistic effect of using both growth factors holds promise for the production of tissue engineered bone.     

Osteogenic Differentiation is Selectively Promoted by Morphogenetic Signals from Chondrocytes and Synergized by a Nutrient Rich Growth Environment

Cartilage formation always precedes that of bone during endochondral skeletal development. To determine if chondrocytes provide inductive signals for osteogenesis, C3H10T½ mesenchymal stem cells were co-cultured in membrane separated transwell culture chambers with chondrocytes, osteoblasts, or fibroblasts. Osteogenesis, as assessed by the expression of osteocalcin mRNAs, was strongly induced in the C3H10T½ cells co-cultured with chondrocytes but not induced by co-culture with either osteoblasts or fibroblasts. Interestingly, while only osteogenic differentiation was observed in the C3H10T½ cells co-cultured with chondrocytes, bone morphogenetic protein (BMP)-7 treatment induced an ordered endochondral progression of skeletal cell differentiation in which chondrogenic differentiation preceded osteogenesis by 2 to 4 days. A nutrient enriched growth environment enhanced osteogenic differentiation induced by either co-culture or BMP-7 treatment 2- to 5-fold. Nutrient enhanced osteogenic differentiation was associated with an activation of the retinoblastoma-mediated signal transduction pathways. In summary, these results show that osteogenesis is selectively induced by morphogenetic signals produced by chondrocytes and that a nutrient rich environment enhances both BMP-7- and co-culture-induced osteogenic differentiation.     

骨形态发生蛋白4和骨形态发生蛋白4/7基因转染对骨髓基质干细胞成骨活性差异的比较

背景：有文献报道骨形态发生蛋白(bone morphogenetic proteins,BMPs)异源二聚体比同源二聚体的活性高,目前国内外尚无BMP-4/7异源二聚体与BMP-4同源二聚体间诱导成骨活性比较的报道。 目的：观察不同基因BMP-4、BMP-4/7对骨髓基质干细胞(bone marrow mesenchymal stem cells,BMSCs)成骨活性的差异,探讨融合基因BMP-4/7的生物学活性。 方法：经脂质体转染分离培养的兔BMSCs,G418筛选出稳定表达株,利用RT-PCR法证明目的基因在BMSCs中的表达情况;以BMP-4和BMP4/7融合基因修饰的AAV载体,转染兔BMSCs,MTT法检测不同基因转染细胞的增殖能力;以BMP-4单基因和BMP-4/7融合基因修饰的AAV载体转染兔BMSCs 7 d后,测定两组细胞内碱性磷酸酶及骨钙素水平,观察成骨活性的变化。 结果与结论：实验成功构建高滴度的分别携带BMP-4单基因、BMP-4/7融合基因的重组腺相关病毒载体AAV-BMP-4、AAV-BMP-4/7;RT-PCR结果证明目的基因能够在BMSCs中得到稳定表达。AAV-BMP-4及AAV-BMP-4/7载体转染效率分别为68.20%、72.18%;转染BMSCs后,细胞增殖能力均明显提高,BMP-4/7融合基因的细胞增殖能力活性高于BMP-4单基因。以BMP-4和BMP-4/7融合基因修饰的AAV转染细胞7 d后,细胞内碱性磷酸酶活性明显上调,骨钙素水平升高,成骨活性均增强;两种基因比较,BMP-4/7融合基因成骨活性强于BMP-4单基因(P < 0.01)。提示BMP-4、BMP-4/7修饰的AAV载体转染效率高,对BMSCs均有成骨活性,其中BMP-4/7融合基因成骨活性强于BMP-4单基因。     

Osteogenic differentiation is selectively promoted by morphogenetic signals from chondrocytes and synergized by a nutrient rich growth environment

Cartilage formation always precedes that of bone during endochondral skeletal development. To determine if chondrocytes provide inductive signals for osteogenesis, C3H10T(1/2) mesenchymal stem cells were co-cultured in membrane separated transwell culture chambers with chondrocytes, osteoblasts, or fibroblasts. Osteogenesis, as assessed by the expression of osteocalcin mRNAs, was strongly induced in the C3H10T(1/2) cells co-cultured with chondrocytes but not induced by co-culture with either osteoblasts or fibroblasts. Interestingly, while only osteogenic differentiation was observed in the C3H10T(1/2) cells co-cultured with chondrocytes, bone morphogenetic protein (BMP)-7 treatment induced an ordered endochondral progression of skeletal cell differentiation in which chondrogenic differentiation preceded osteogenesis by 2 to 4 days. A nutrient enriched growth environment enhanced osteogenic differentiation induced by either co-culture or BMP-7 treatment 2- to 5-fold. Nutrient enhanced osteogenic differentiation was associated with an activation of the retinoblastoma-mediated signal transduction pathways. In summary, these results show that osteogenesis is selectively induced by morphogenetic signals produced by chondrocytes and that a nutrient rich environment enhances both BMP-7- and co-culture-induced osteogenic differentiation.     

Effect of local sequential VEGF and BMP-2 delivery on ectopic and orthotopic bone regeneration

Bone regeneration is a coordinated cascade of events regulated by several cytokines and growth factors. Angiogenic growth factors are predominantly expressed during the early phases for re-establishment of the vascularity, whereas osteogenic growth factors are continuously expressed during bone formation and remodeling. Since vascular endothelial growth factor (VEGF) and bone morphogenetic proteins (BMPs) are key regulators of angiogenesis and osteogenesis during bone regeneration, the aim of this study was to investigate if their sequential release could enhance BMP-2-induced bone formation. A composite consisting of poly(lactic-co-glycolic acid) microspheres loaded with BMP-2 embedded in a poly(propylene) scaffold surrounded by a gelatin hydrogel loaded with VEGF was used for the sequential release of the growth factors. Empty composites or composites loaded with VEGF and/or BMP-2 were implanted ectopically and orthotopically in Sprague–Dawley rats (n = 9). Following implantation, the local release profiles were determined by measuring the activity of ¹²⁵I-labeled growth factors using scintillation probes. After 8 weeks blood vessel and bone formation were analyzed using microangiography, μCT and histology. The scaffolds exhibited a large initial burst release of VEGF within the first 3 days and a sustained release of BMP-2 over the full 56-day implantation period. Although VEGF did not induce bone formation, it did increase the formation of the supportive vascular network (p = 0.03) in ectopic implants. In combination with local sustained BMP-2 release, VEGF significantly enhanced ectopic bone formation compared to BMP-2 alone (p = 0.008). In the orthotopic defects, no effect of VEGF on vascularisation was found, nor was bone formation higher by the combination of growth factors, compared to BMP-2 alone. This study demonstrates that a sequential angiogenic and osteogenic growth factor release may be beneficial for the enhancement of bone regeneration.     

A differential effect of bone morphogenetic protein-2 and vascular endothelial growth factor release timing on osteogenesis at ectopic and orthotopic sites in a large-animal model

In bone tissue engineering, growth factors are widely used. Bone morphogenetic proteins (BMPs) and vascular endothelial growth factor (VEGF) are the most well-known regulators of osteogenesis and angiogenesis. We investigated whether the timing of dual release of VEGF and BMP-2 influences the amount of bone formation in a large-animal model. Poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs) were loaded with BMP-2 or VEGF to create sustained-release profiles, and rapidly degrading gelatin was loaded with either growth factor for fast-release profiles. To study in vivo osteogenicity, the two delivery vehicles were combined with biphasic calcium phosphate (BCP) scaffolds and implanted in 10 Beagle dogs for 9 weeks, at both ectopic (paraspinal muscles) and orthotopic sites (critical-size ulnar defect). The 9 ectopic groups contained combined or single BMP/VEGF dosage, in sustained- or fast-release profiles. In the ulnae of 8 dogs, fast VEGF and sustained BMP-2 were applied to one leg, and the other received the opposite release profiles. The two remaining dogs received bilateral control scaffolds. Bone growth dynamics was analyzed by fluorochrome injection at weeks 3, 5, and 7. Postoperative and posteuthanization X-rays of the ulnar implants were taken. After 9 weeks of implantation, bone quantity and bone growth dynamics were studied by histology, histomorphometry, and fluorescence microscopy. The release of the growth factors resulted in both enhanced orthotopic and ectopic bone formation. Bone formation started before 3 weeks and continued beyond 7 weeks. The ectopic BMP-2 fast groups showed significantly more bone compared to sustained release, independent of the VEGF profile. The ulna implants revealed no significant differences in the amount of bone formed. This study shows that timing of BMP-2 release largely determines speed and amount of ectopic bone formation independent of VEGF release. Furthermore, at the orthotopic site, no significant effect on bone formation was found from a timed release of growth factors, implicating that timed-release effects are location dependent.     

Growth factors reduce the suppression of proliferation and osteogenic differentiation by titanium particles on MSCs

This study was conducted to test the hypothesis that growth factors can reduce the suppressive effect of titanium particles on MSCs. Cultured human MSCs at passage 3 were challenged with prepared cpTi particles at a concentration of 500 particles/cell along with one of the following growth factors: TGF-beta(1) (10 ng/mL), FGF-2 (10 ng/mL), IGF-I (100 ng/mL), and BMP-6 (50 ng/mL). After various periods of time, the treatment effects on cellular proliferation, viability, and osteogenic differentiation were measured. All the four growth factors positively promoted cell proliferation and viability to a varying extent. FGF-2 most effectively enhanced cell proliferation, whereas IGF-I was the most effective growth factor for enhancing cell viability. FGF-2, IGF-I, and BMP-6 reversed the titanium-mediated suppression of osteogenic differentiation, BMP-6 being the most effective one. Various growth factors can mitigate the suppressive effects of titanium particles on MSCs and enhance cell proliferation, viability, and osteogenic differentiation.     

纤维蛋白胶复合重组人骨形态发生蛋白2微球对犬骨髓基质细胞增殖与分化的影响

背景：前期实验证实聚乳酸-聚乙醇酸微球/纤维蛋白胶能作为重组人骨形态发生蛋白2的良好可注射性缓释载体。 目的：观察可注射性骨形态发生蛋白缓释体系对犬骨髓基质细胞增殖与分化的影响。 方法：采用复乳-溶剂挥发法制备重组人骨形态发生蛋白2/聚乳酸-聚乙醇酸共聚物载药微球,然后将微球与纤维蛋白胶复合制备出重组人骨形态发生蛋白2/聚乳酸-聚乙醇酸共聚物/纤维蛋白胶复合材料,采用细胞培养及组织化学等方法观察微球对犬骨髓基质细胞的增殖与分化的影响。 结果与结论：重组人骨形态发生蛋白2/聚乳酸-聚乙醇酸共聚物/纤维蛋白胶微球对骨髓基质细胞的增殖无明显影响,但对细胞的分化功能有明显的促进作用。说明纤维蛋白胶复合重组人骨形态发生蛋白2微球能够提高骨髓基质细胞的体外成骨能力,可作为骨形态发生蛋白的良好载体。     

Exogenously added BMP-6, BMP-7 and VEGF may not enhance the osteogenic differentiation of human adipose stem cells

Abstract

In the present study bone morphogenetic protein (BMP)-6 alone or in synergy with BMP-7 and vascular endothelial growth factor (VEGF) were tested with human adipose stem cells (hASCs) seeded on cell culture plastic or 3D bioactive glass. Osteogenic medium (OM) was used as a positive control for osteogenic differentiation. The same growth factor groups were also tested combined with OM. None of the growth factor treatments could enhance the osteogenic differentiation of hASCs in 3D- or 2D-culture compared to control or OM. In 3D-culture OM promoted significantly total collagen production, whereas in 2D-culture OM induced high total ALP activity and mineralization compared to control and growth factors groups, but also high cell proliferation. In this study, hASCs did not respond to exogenously added growth although various parameters of the study set-up may have affected these findings contradictory to the previous literature.     

Sequential delivery of BMP-2 and IGF-1 using a chitosan gel with gelatin microspheres enhances early osteoblastic differentiation

The purpose of this study was to develop and characterize a chitosan gel/gelatin microsphere (MSs) dual delivery system for sequential release of bone morphogenetic protein-2 (BMP-2) and insulin-like growth factor-1 (IGF-1) to enhance osteoblast differentiation in vitro. We made and characterized the delivery system based on its degree of cross-linking, degradation, and release kinetics. We also evaluated the cytotoxicity of the delivery system and the effect of growth factors on cell response using pre-osteoblast W-20-17 mouse bone marrow stromal cells. IGF-1 was first loaded into MSs, and then the IGF-1-containing MSs were encapsulated into the chitosan gel which contained BMP-2. Cross-linking of gelatin with glyoxal via Schiff bases significantly increased thermal stability and decreased the solubility of the MSs, leading to a significant decrease in the initial release of IGF-1. Encapsulation of the MSs into the chitosan gel generated polyelectrolyte complexes by intermolecular interactions, which further affected the release kinetics of IGF-1. This combinational delivery system provided an initial release of BMP-2 followed by a slow and sustained release of IGF-1. Significantly greater alkaline phosphatase activity was found in W-20-17 cells treated with the sequential delivery system compared with other treatments (P<0.05) after a week of culture.     

In vivo osteogenic response to different ratios of BMP-2 and VEGF released from a biodegradable porous system

Bone regeneration and vascularization with porous PLGA scaffolds loaded with VEGF (0.35 and 1.75 μg) and BMP-2 (3.5 and 17.5 μg), incorporated in PLGA microspheres, or the combination of either dose of BMP-2 with the low dose of VEGF were investigated in an intramedullary femur defect in rabbits. The system was designed to control growth factor (GF) release and maintain the GFs localized within the defect. An incomplete release was observed in vitro whereas in vivo VEGF and BMP-2 were totally delivered during 3 and 4 weeks, respectively. A weak synergistic effect of the dual delivery of VEGF and BMP-2 (high dose) was found by 4 weeks. However, the absence of an apparent synergistic long-term effect (12 weeks) of the combination over BMP-2 alone suggests that more work has to be done to optimize VEGF dose, sequential presentation, and the ratio of the two GFs to obtain a beneficial bone repair response.     

Sustained release of BMP-2 in a lipid-based microtube vehicle

Sustained release systems have been developed for the use of growth factors in tissue engineering applications. However, many of these systems continue to have limitations associated with low loading efficiencies and reduced biological activity after release. In this paper, we utilized a lipid-based microtube system for the sustained release of BMP-2. The lipid microtubes were fabricated using a self-assembly method, in order to avoid the use of harsh organic solvents that may damage the protein. BMP-2 was loaded into the microtubes by rehydrating dried microtubes in the protein solution. The loading efficiency and release kinetics of BMP-2 in the microtubes were measured using in vitro immunoassays. Loading efficiency was found to be dependent on microtube concentration. The potential for this system to deliver biologically active BMP-2 was assessed using the alkaline phosphatase assay and von Kossa staining on human mesenchymal stem cell cultures. The results demonstrate that the lipid microtube system is able to provide sustained delivery of biologically active BMP-2 and thereby induce osteogenic differentiation.     

Heterobifunctional poly(ethylene glycol)-tethered bone morphogenetic protein-2-stimulated bone marrow mesenchymal stromal cell differentiation and osteogenesis

We describe a biomimetic mode of insoluble signaling stimulation to provide target delivery of bone morphogenetic protein-2 (BMP-2), with the aim of prolonging the retention of BMP-2 use in bone tissue engineering and to enable its localized release in response to cellular activity. In our novel localization process, we used heterobifunctional acrylate-N-hydroxysuccinimide poly(ethylene glycol) (PEG) as a spacer to tether BMP-2 onto a poly(lactide-co-glycolide) scaffold. Use of PEG-tethered BMP-2 was feasible because BMP-2 retained its activity after covalent conjugation. The PEG-tethered BMP-2 conjugate sustained stimulation and retained its mitogenic activity, notably affecting pluripotent stem cell proliferation and differentiation. We seeded the scaffolds with bone marrow-derived mesenchymal stromal cells as progenitor cells to evaluate their morphology and phenotypic expression. We also created bilateral, full-thickness cranial defects in rabbits to investigate the osteogenic effect of cultured mesenchymal stromal cells on bone regeneration in vivo. Histomorphometry and histology demonstrated that the PEG-tethered BMP-2 conjugate enhanced de novo bone formation after surgery. Our work revealed the potential for biomimetic surface engineering by entrapping signaling growth factor to stimulate osteogenesis. Our technique may provide a new platform for bone-engineered stem cell therapies.     

BMP-7 loaded microspheres as a new delivery system for the cultivation of human chondrocytes in a collagen type-I gel

In recent years, interest in chondrocyte cultures for transplantation has gained increasing attention. We investigated the use of PGLA microspheres as a new delivery system for BMP-7 and the effects on human chondrocytes cultivated in a 3D collagen gel culture. In an in vitro study, human chondrocytes obtained from osteoarthritic knee joints were released, transferred into a collagen type-I gel, and cultivated up to 14 days. In the treatment group PGLA microspheres loaded with human recombinant BMP-7 protein were added to the matrix. After the cultivation period, histological and immunohistochemical investigations were performed. In addition, the aggrecan core protein and type-II collagen mRNA concentrations were measured by real-time PCR. Histological staining for proteoglycan and collagen type-II protein and quantification via digital image processing revealed a significantly higher content in the samples cultivated with BMP-7 loaded microspheres in comparison to the control samples. Moreover, the collagen gel scaffold was partially remodeled by the chondrocytes and replaced by newly synthesized extracellular matrix. Cellular proliferation as well as apoptosis were low. In conclusion, we consider the PGLA microsphere system to be a functional device for the delivery of growth factors during the cultivation of articular chondrocytes leading to an increased content of type-II collagen and proteoglycan in the extracellular matrix.     

Brg1调控重组人骨形态发生蛋白2诱导成骨细胞分化

背景：Brg1是依赖ATP的染色质改变复合物的核心催化亚基,该亚基在基因的转录调控、复制、重组,骨骼肌的分化、抑制肿瘤的发生等活动中起着重要的作用。 目的：探索Brg1基因在骨形态发生蛋白2诱导成骨细胞分化过程中的调控机制。 方法：采用胶原酶消化法进行小鼠颅骨成骨细胞的原代培养;分别用0,50,200 μg/L的重组人骨形态发生蛋白2诱导原代培养的成骨细胞的分化,摸索骨形态发生蛋白2的最佳作用剂量;实时荧光定量PCR和Western blot进行骨形态发生蛋白2对Brg1的作用时间的动力学分析;实时荧光定量PCR和钙钴染色法检测敲除Brg1对骨形态发生蛋白2诱导的成骨分化的影响;构建Dlx5腺病毒重组表达载体,实时荧光定量PCR和钙钴染色法检测Brg1在骨形态发生蛋白2诱导的成骨分化过程中对Dlx5的调控作用。 结果与结论：用自行合成的重组人骨形态发生蛋白2可诱导原代培养小鼠成骨细胞分化,200 μg/L剂量有着较好的诱导分化效果;重组人骨形态发生蛋白2可诱导Brg1基因转录水平和翻译水平表达水平上调;敲除Brg1可抑制重组人骨形态发生蛋白2诱导的成骨分化;Brg1能够调控Dlx5的表达水平。说明Brg1通过调控Dlx5的表达水平调控重组人骨形态发生蛋白2诱导的小鼠成骨细胞的分化。     

A comprehensive analysis of the dual roles of BMPs in regulating adipogenic and osteogenic differentiation of mesenchymal progenitor cells

Pluripotent mesenchymal stem cells (MSCs) are bone marrow stromal progenitor cells that can differentiate into osteogenic, chondrogenic, adipogenic, and myogenic lineages. Several signaling pathways have been shown to regulate the lineage commitment and terminal differentiation of MSCs. Here, we conducted a comprehensive analysis of the 14 types of bone morphogenetic protein (BMPs) for their abilities to regulate multilineage specific differentiation of MSCs. We found that most BMPs exhibited distinct abilities to regulate the expression of Runx2, Sox9, MyoD, and PPARgamma2. Further analysis indicated that BMP-2, BMP-4, BMP-6, BMP-7, and BMP-9 effectively induced both adipogenic and osteogenic differentiation in vitro and in vivo. BMP-induced commitment to osteogenic or adipogenic lineage was shown to be mutually exclusive. Overexpression of Runx2 enhanced BMP-induced osteogenic differentiation, whereas knockdown of Runx2 expression diminished BMP-induced bone formation with a decrease in adipocyte accumulation in vivo. Interestingly, overexpression of PPARgamma2 not only promoted adipogenic differentiation, but also enhanced osteogenic differentiation upon BMP-2, BMP-6, and BMP-9 stimulation. Conversely, MSCs with PPARgamma2 knockdown or mouse embryonic fibroblasts derived from PPARgamma2(-/-) mice exhibited a marked decrease in adipogenic differentiation, coupled with reduced osteogenic differentiation and diminished mineralization upon BMP-9 stimulation, suggesting that PPARgamma2 may play a role in BMP-induced osteogenic and adipogenic differentiation. Thus, it is important to understand the molecular mechanism behind BMP-regulated lineage divergence during MSC differentiation, as this knowledge could help us to understand the pathogenesis of skeletal diseases and may lead to the development of strategies for regenerative medicine.     

仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原的制备及其细胞相容性

背景：目前骨组织工程常用的支架材料主要有无机材料、有机高分子材料及天然衍生材料等,上述材料各有优缺点,为了充分发挥各类材料的优势,弥补其不足,目前多采用联合材料制备复合支架。 目的：制备新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原,并观察其对骨髓间充质干细胞增殖、黏附及分化的影响。 方法：制备壳聚糖/纳米羟基磷灰石/胶原复合支架材料,扫描电镜观察支架材料表面微观形貌;采用真空吸附法将骨形态发生蛋白7多肽与支架材料复合,高效液相色谱仪检测骨形态发生蛋白7多肽在体外的释放规律;将骨髓间充质干细胞接种到复合骨形态发生蛋白7多肽的仿生支架材料上,以未复合多肽的支架材料作为对照,检测支架材料表面细胞增殖、黏附率、生长形态及碱性磷酸酶活性。 结果与结论：壳聚糖/纳米羟基磷灰石/胶原支架材料呈多孔状,孔径10~100 µm;骨形态发生蛋白7多肽可以从支架材料中缓慢释出;在复合多肽的仿生支架材料表面,骨髓间充质干细胞的黏附及向成骨细胞方向分化能力均明显强于对照组(P < 0.05),而增殖能力与对照组差异无显著性意义(P > 0.05)。说明新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原是一种理想的骨组织工程支架材料,具有良好的细胞相容性。