转染碱性成纤维生长因子基因的骨髓间充质干细胞在珊瑚骨表面生长状况

背景:颌面骨缺损是临床上常遇到的问题,寻找理想的种子细胞同支架材料复合构建组织工程化人工骨成为该类疾病治疗的发展趋势.目的:将转染碱性成纤维生长因子基因的骨髓间充质干细胞与珊瑚骨的复合培养,观察转染碱性成纤维生长因子基凶的骨髓间充质干细胞在珊瑚支架材料上生长状况.设计、时间及单位:骨组织工程实验,于2006-0312008-06 在中山大学口腔医学研究所完成.材料:选用海南省浅海滩产石头状滨珊瑚为原料,将其制成8mm×8mm×2mm的珊瑚人工骨小块.方法:采用密度梯度离心法分离新西兰大白兔骨髓间充质干细胞,采用贴壁筛选法对分离出的骨髓间充质下细胞进行纯化,利用脂质体转染bFGF-pcDNA3到骨髓间充质干细胞.取生长良好的转染碱性成纤维生长因子基因骨髓间充质干细胞和未转染的骨髓间充质干细胞,分别接种于不同珊瑚表面.主要观察指标:MTT法观察细胞-支架联合培养骨髓间充质干细胞的增殖情况和利用扫描电镜观察珊瑚支架上细胞的生长状况.结果:MTT法检测显示细胞-支架联合培养转染组细胞与联合培养未转染组细胞增殖相比差异有显著性意义(P＜0.05),联合培养转染组细胞生长增殖强于未转染组细胞.而联合培养的转染组细胞同单纯培养转染组细胞增殖相比差异无显著性意义(P＞0.05).扫描电镜观察显示复合骨髓间充质干细胞细胞贴附在珊瑚上,并在材料上完全铺展,形态多样,细胞向孔内长入或跨越微孔表面,部分区域有细胞外基质形成.结论:转染碱性成纤维生长因子基因的骨髓间充质干细胞在珊瑚支架材料上生长状况较未转染组好,珊瑚人工骨不影响骨髓间充质干细胞的增殖,可以作为骨髓间充质干细胞支架材料构建组织工程骨.     

Bone regeneration in minipigs via calcium phosphate cement scaffold delivering autologous bone marrow mesenchymal stem cells and platelet‐rich plasma

Macroporous calcium phosphate cement (CPC) with stem cell seeding is promising for bone regeneration. The objective of this study was to investigate the effects of co‐delivering autologous bone marrow mesenchymal stem cells (BMSCs) and autologous platelet‐rich plasma (PRP) in CPC scaffold for bone regeneration in minipigs for the first time. Twelve female adult Tibet minipigs (12–18 months old) were used. A cylindrical defect with 10 mm height and 8 mm diameter was prepared at the femoral condyle. Two bone defects were created in each minipig, one at each side of the femoral condyle. Three constructs were tested: (1) CPC scaffold (CPC control); (2) CPC seeded with BMSCs (CPC‐BMSC); (3) CPC seeded with BMSCs and PRP (CPC‐BMSC‐PRP). Two time points were tested: 6 and 12 weeks (n = 4). Good integration of implant with surrounding tissues was observed in all groups. At 12 weeks, the CPC‐BMSC‐PRP group had significantly less residual CPC remaining in the defect than the CPC‐BMSC group and the CPC control (p < 0.05). The residual CPC volume for the CPC‐BMSC‐PRP group was half that of the CPC control. New bone formation for CPC‐BMSC‐PRP was more than two‐fold that of the CPC control (p < 0.05). CPC‐BMSC‐PRP had new blood vessel density that was nearly two‐fold that of the CPC control (p < 0.05). In conclusion, CPC scaffold with autologous BMSC‐PRP doubled the new bone regeneration and blood vessel density in minipigs compared with the CPC control. In the present study, the new macroporous CPC system with co‐delivered BMSC‐PRP has been shown to promote scaffold resorption and bone regeneration in large defects. Copyright © 2017 John Wiley & Sons, Ltd.     

聚左旋乳酸/壳聚糖纳米纤维三维多孔支架复合骨髓间充质干细胞修复兔骨缺损

背景：骨髓间充质干细胞具有向多种间质细胞谱系分化的能力,且支架材料的性能对骨缺损的修复有重要影响。目的：观察聚左旋乳酸/壳聚糖纳米纤维三维多孔支架复合骨髓间充质干细胞治疗骨缺损。方法：对骨缺损模型兔分别采用空白植入、髂后上棘自体松质骨移植、聚左旋乳酸/壳聚糖纳米纤维多孔支架移植和复合了骨髓间充质干细胞的聚左旋乳酸/壳聚糖纳米纤维多孔支架移植修复缺损部位。结果与结论：至移植12周,移植复合了骨髓间充质干细胞的聚左旋乳酸/壳聚糖纳米纤维多孔支架的实验兔的缺损处有骨组织生成,支架材料降解,已完成缺损修复,其修复情况接近松质骨组;髂后上棘自体松质骨移植的实验兔的缺损修复完好,新形成的骨组织较规则;只植入聚左旋乳酸/壳聚糖纳米纤维多孔支架的实验兔有少量骨组织形成,材料部分降解;空白植入的实验兔缺损处无新生骨组织生成,主要由纤维结缔组织填充。说明新型的生物支架材料聚左旋乳酸/壳聚糖纳米纤维三维多孔支架与来源于新西兰大白兔的骨髓间充质干细胞复合培养后,植入同种异体兔股骨髁缺损处,使骨缺损的修复速度加快,表现为较好的体内诱导成骨的作用。     

Induction of bone formation in biphasic calcium phosphate scaffolds by bone morphogenetic protein‐2 and primary osteoblasts

Bone tissue engineering strategies mainly depend on porous scaffold materials. In this study, novel biphasic calcium phosphate (BCP) matrices were generated by 3D‐printing. High porosity was achieved by starch consolidation. This study aimed to characterise the porous BCP‐scaffold properties and interactions of osteogenic cells and growth factors under in vivo conditions. Five differently treated constructs were implanted subcutaneously in syngeneic rats: plain BCP constructs (group A), constructs pre‐treated with BMP‐2 (group B; 1.6 µg BMP‐2 per scaffold), seeded with primary osteoblasts (OB) (group C), seeded with OB and BMP‐2 (group D) and constructs seeded with OB and pre‐cultivated in a flow bioreactor for 6 weeks (group E). After 2, 4 and 6 weeks, specimens were explanted and subjected to histological and molecular biological analyses. Explanted scaffolds were invaded by fibrovascular tissue without significant foreign body reactions. Morphometric analysis demonstrated significantly increased bone formation in samples from group D (OB + BMP‐2) compared to all other groups. Samples from groups B‐E displayed significant mRNA expression of bone‐specific genes after 6 weeks. Pre‐cultivation in the flow bioreactor (group E) induced bone formation comparable with group B. In this study, differences in bone distribution between samples with BMP‐2 or osteoblasts could be observed. In conclusion, combination of osteoblasts and BMP‐2 synergistically enhanced bone formation in novel ceramic scaffolds. These results provide the basis for further experiments in orthotopic defect models with a focus on future applications in orthopaedic and reconstructive surgery. Copyright © 2012 John Wiley & Sons, Ltd.     

Bone marrow mesenchymal stem cells,platelet‐rich plasma and nanohydroxyapatite–type I collagen beads were integral parts of biomimetic bone substitutes for bone regeneration

Platelet rich plasma (PRP), which includes many growth factors, can activate osteoid production, collagen synthesis and cell proliferation. Nanohydroxyapatite‐type I collagen beads (CIB), which mimetic natural bone components, are not only flexible fillers for bone defect but also encourage osteogenesis. Bone marrow mesenchymal stem cells (BMSCs) are often used as an abundant cell source for tissue engineering. We used a rabbit model to combine PRP, CIB and BMSCs (CIB+PRP+BMSC) into a bone‐like substitute to study its impact on bone regeneration, when compared to defect alone, PRP, CIB+PRP, and PRP+BMSC. CIB+PRP upregulated more alkaline phosphatase (ALP) activity in BMSCs than PRP alone at 4 weeks postoperation. CIB+PRP+BMSC and PRP+BMSC did not differ significantly in DNA content, total collagen content, and ALP activity at 8 weeks. In histological assay, both CIB+PRP+BMSC and PRP+BMSC showed more bone regeneration at 4 and 8 weeks. Higher trabecular bone volume in tissue volume (BV/TV) (31.15±2.67% and 36.93±1.01%), fractal dimension (FD) (2.30±0.18 and 2.65±0.02) and lower trabecular separation (Tb.Sp) (2.30±0.18 and 1.35±0.16) of CIB+PRP+BMSC than of other groups at 4 and 8 weeks, and approach to of bone tissue (BV/TV=24.35±2.13%; FD=2.65±0.06; Tb.Sp=4.19±0.95). CIB+PRP+BMSC significantly enhanced new bone formation at 4 week. Therefore, nanohydroxyapatite‐type I collagen beads combined with PRP and BMSCs produced a bone substitute with efficiently improved bone regeneration that shows promise to repair bone defects. Copyright © 2012 John Wiley & Sons, Ltd.     

聚碳酸亚丙酯/壳聚糖纳米纤维三维多孔支架复合骨髓间充质干细胞修复兔骨缺损

背景:骨组织工程细胞移植技术是近年来的研究热点,支架材料是其重要组成部分,同时也是三大要素中最有望取得突破性进展的环节,随着组织工程材料工艺的革新,有望为更好地修复骨缺损带来新的希望。目的:评价聚碳酸亚丙酯/壳聚糖纳米纤维(propylene carbonate/chitosan nanofibers,PPC/CSNF)三维多孔支架复合骨髓间充质干细胞(bone marrow mesenchymal stem cell,BMSCs)修复兔股骨髁部骨缺损的能力。方法:二次相分离法制作PPC/CSNF复合三维多孔支架,将第3代的BMSCs种植到复合材料上。36只新西兰大白兔右侧股骨髁制作直径6mm深10mm骨缺损,于缺损处实验组植入复合BMSCs的PPC/CSNF多孔支架,对照组植入单纯PPC/CSNF多孔支架,标准组于兔髂后上棘取自体松质骨移植于缺损部位,空白组不做处理。术后第4,8,12周取材,通过大体观察、放射学检查和组织学检查等方法评价其修复缺损情况。结果与结论:实验组放射学评价与标准组无显著差异,两组结果均优于对照组(P<0.05);实验组大体标本与标准组基本一致;实验组组织学检查新骨生成速度、生成量优于对照组(P<0.05);空白组不能自行修复骨缺损,最后缺损由纤维组织充填。结果显示PPC/CSNF多孔支架具有较好的细胞和组织相容性,复合兔BMSCs能加速新骨形成,可用于修复兔股骨髁部骨缺损。     

聚碳酸亚丙酯/壳聚糖纳米纤维三维多孔支架复合骨髓间充质干细胞修复兔骨缺损

背景：骨组织工程细胞移植技术是近年来的研究热点,支架材料是其重要组成部分,同时也是三大要素中最有望取得突破性进展的环节,随着组织工程材料工艺的革新,有望为更好地修复骨缺损带来新的希望。目的：评价聚碳酸亚丙酯/壳聚糖纳米纤维（propylene carbonate/chitosan nanofibers,PPC/CSNF）三维多孔支架复合骨髓间充质干细胞（bone marrow mesenchymal stem cell,BMSCs）修复兔股骨髁部骨缺损的能力。方法：二次相分离法制作PPC/CSNF复合三维多孔支架,将第3代的BMSCs种植到复合材料上。36只新西兰大白兔右侧股骨髁制作直径6mm深10mm骨缺损,于缺损处实验组植入复合BMSCs的PPC/CSNF多孔支架,对照组植入单纯PPC/CSNF多孔支架,标准组于兔髂后上棘取自体松质骨移植于缺损部位,空白组不做处理。术后第4,8,12周取材,通过大体观察、放射学检查和组织学检查等方法评价其修复缺损情况。结果与结论：实验组放射学评价与标准组无显著差异,两组结果均优于对照组（P〈0.05）;实验组大体标本与标准组基本一致;实验组组织学检查新骨生成速度、生成量优于对照组（P〈0.05）;空白组不能自行修复骨缺损,最后缺损由纤维组织充填。结果显示PPC/CSNF多孔支架具有较好的细胞和组织相容性,复合兔BMSCs能加速新骨形成,可用于修复兔股骨髁部骨缺损。     

骨组织工程支架材料的研究现状与应用前景

背景：目前组织工程骨修复骨缺损在临床应用中较为关键的问题是建立血管网,为新骨的形成提供氧气及营养物质,并为机体提供代谢途径。 目的：综述近年组织工程骨支架材料的特点,并着重介绍复合支架材料的研究现状。 方法：以“骨组织工程,血管化,支架材料,复合支架材料”为中文检索词,以“bone tissue engineedng,vascularization,scaffold,compositescaffold”英文检索词,应用计算机在中国期刊全文数据库和PubMed数据库检索2001年1月至2014年1月的相关文章,将所有文章进行初步筛选后,对保留的文章进一步详细分析、归纳并总结。 结果与结论：按照组织工程骨支架材料的来源不同,可将其分为人工合成材料、天然衍生材料和复合支架材料,单一支架材料难以作为最理想的材料修复骨缺损,复合支架材料能在不同程度上弥补单一支架材料的缺陷,因此近年来组织工程支架材料的发展由单一材料发展为复合材料,并呈现人工合成材料与天然材料有机结合的趋势。但复合支架材料在临床应用中仍然有许多尚待解决的问题,主要有控制复合材料比例,使材料降解速率与组织细胞的生长速率相适应,保持复合材料的多孔隙和高机械强度。     

Chitosan-poly(butylene succinate) scaffolds and human bone marrow stromal cells induce bone repair in a mouse calvaria model

Tissue engineering sustains the need of a three-dimensional (3D) scaffold to promote the regeneration of tissues in volume. Usually, scaffolds are seeded with an adequate cell population, allowing their growth and maturation upon implantation in vivo. Previous studies obtained by our group evidenced significant growth patterns and osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) when seeded and cultured on melt-based porous chitosan fibre mesh scaffolds (cell constructs). Therefore, it is crucial to test the in vivo performance of these in vitro 3D cell constructs. In this study, chitosan-based scaffolds were seeded and cultured in vitro with hBMSCs for 3 weeks under osteogenic stimulation conditions and analysed for cell adhesion, proliferation and differentiation. Implantation of 2 weeks precultured cell constructs in osteogenic culture conditions was performed into critical cranial size defects in nude mice. The objective of this study was to verify the scaffold integration and new bone formation. At 8 weeks of implantation, scaffolds were harvested and prepared for micro-computed tomography (μCT) analysis. Retrieved implants showed good integration with the surrounding tissue and significant bone formation, more evident for the scaffolds cultured and implanted with human cells. The results of this work demonstrated that chitosan-based scaffolds, besides supporting in vitro proliferation and osteogenic differentiation of hBMSCs, induced bone formation in vivo. Thus, their osteogenic potential in orthotopic location in immunodeficient mice was validated, evidencing good prospects for their use in bone tissue-engineering therapies.     

Effects of designed PLLA and 50:50 PLGA scaffold architectures on bone formation in vivo

Biodegradable porous scaffolds have been investigated as an alternative approach to current metal, ceramic, and polymer bone graft substitutes for lost or damaged bone tissues. Although there have been many studies investigating the effects of scaffold architecture on bone formation, many of these scaffolds were fabricated using conventional methods such as salt leaching and phase separation, and were constructed without designed architecture. To study the effects of both designed architecture and material on bone formation, this study designed and fabricated three types of porous scaffold architecture from two biodegradable materials, poly (L‐lactic acid) (PLLA) and 50:50 Poly(lactic‐co‐glycolic acid) (PLGA), using image based design and indirect solid freeform fabrication techniques, seeded them with bone morphogenetic protein‐7 transduced human gingival fibroblasts, and implanted them subcutaneously into mice for 4 and 8 weeks. Micro‐computed tomography data confirmed that the fabricated porous scaffolds replicated the designed architectures. Histological analysis revealed that the 50:50 PLGA scaffolds degraded but did not maintain their architecture after 4 weeks implantation. However, PLLA scaffolds maintained their architecture at both time points and showed improved bone ingrowth, which followed the internal architecture of the scaffolds. Mechanical properties of both PLLA and 50:50 PLGA scaffolds decreased but PLLA scaffolds maintained greater mechanical properties than 50:50 PLGA after implantation. The increase of mineralized tissue helped support the mechanical properties of bone tissue and scaffold constructs between 4–8 weeks. The results indicate the importance of choice of scaffold materials and computationally designed scaffolds to control tissue formation and mechanical properties for desired bone tissue regeneration. Copyright © 2011 John Wiley & Sons, Ltd.     

Adipose‐ and bone marrow‐derived mesenchymal stem cells display different osteogenic differentiation patterns in 3D bioactive glass‐based scaffolds

Mesenchymal stem cells can be isolated from a variety of different sources, each having their own peculiar merits and drawbacks. Although a number of studies have been conducted comparing these stem cells for their osteo‐differentiation ability, these are mostly done in culture plastics. We have selected stem cells from either adipose tissue (ADSCs) or bone marrow (BMSCs) and studied their differentiation ability in highly porous three‐dimensional (3D) 45S5 Bioglass®‐based scaffolds. Equal numbers of cells were seeded onto 5 × 5 × 4 mm³ scaffolds and cultured in vitro, with or without osteo‐induction medium. After 2 and 4 weeks, the cell–scaffold constructs were analysed for cell number, cell spreading, viability, alkaline phosphatase activity and osteogenic gene expression. The scaffolds with ADSCs displayed osteo‐differentiation even without osteo‐induction medium; however, with osteo‐induction medium osteogenic differentiation was further increased. In contrast, the scaffolds with BMSCs showed no osteo‐differentiation without osteo‐induction medium; after application of osteo‐induction medium, osteo‐differentiation was confirmed, although lower than in scaffolds with ADSCs. In general, stem cells in 3D bioactive glass scaffolds differentiated better than cells in culture plastics with respect to their ALP content and osteogenic gene expression. In summary, 45S5 Bioglass‐based scaffolds seeded with ADSCs are well‐suited for possible bone tissue‐engineering applications. Induction of osteogenic differentiation appears unnecessary prior to implantation in this specific setting. Copyright © 2013 John Wiley & Sons, Ltd.     

A three-dimensional hydroxyapatite/polyacrylonitrile composite scaffold designed for bone tissue engineering

In recent years, various composite scaffolds based on hydroxyapatite have been developed for bone tissue engineering. However, the poor cell survival micro-environment is still the major problem limiting their practical applications in bone repairing and regeneration. In this study, we fabricated a class of fluffy and porous three-dimensional composite fibrous scaffolds consisting of hydroxyapatite and polyacrylonitrile by employing an improved electrospinning technique combined with a bio-mineralization process. The fluffy structure of the hydroxyapatite/polyacrylonitrile composite scaffold ensured the cells would enter the interior of the scaffold and achieve a three-dimensional cell culture. Bone marrow mesenchymal stem cells were seeded into the scaffolds and cultured for 21 days in vitro to evaluate the response of cellular morphology and biochemical activities. The results indicated that the bone marrow mesenchymal stem cells showed higher degrees of growth, osteogenic differentiation and mineralization than those cultured on the two-dimensional hydroxyapatite/polyacrylonitrile composite membranes. The obtained results strongly supported the fact that the novel three-dimensional fluffy hydroxyapatite/polyacrylonitrile composite scaffold had potential application in the field of bone tissue engineering.

A fluffy and porous (3D) HA composite fibrous scaffold was fabricated by employing an improved electrospinning technique combined with a bio-mineralization process.     

血管内皮生长因子缓释系统复合成骨诱导的骨髓间质干细胞修复骨缺损

背景：从目前文献报道来看,生长因子缓释系统在骨科方面的应用研究主要集中在软骨修复方面,关于复合组织工程骨修复骨缺损的研究报道较少。目的：构建复合组织工程骨,观察其修复骨缺损的效果。方法：①通过血管内皮生长因子、肝素和纤维蛋白胶的不同组合构建复合支架缓释系统,经检测选取最优组种植成骨诱导的骨髓间质干细胞构建复合组织工程骨。②36只SD大鼠制备股骨干骨缺损模型后随机分为3组,分别植入上述复合组织工程骨和复合支架缓释系统,空白对照组不植入任何材料,3组均予内固定。③ELISA方法检测样本释放的血管内皮生长因子浓度以评价复合支架缓释系统的缓释性能;于植入后1,4,12,24周行X射线检查及骨组织碱性磷酸酶染色评价各组动物骨缺损修复水平。结果与结论：经血管内皮生长因子/肝素/纤维蛋白修饰的纳米晶胶原基骨复合支架缓释系统在体外环境缓释30d后依然高浓度释放血管内皮生长因子,且缓释曲线平直;动物实验中植入的复合组织工程骨在24周内完全降解,骨缺损修复完成,骨缺损部位碱性磷酸酶活性明显高于复合支架缓释系统组、空白对照组。结果显示该复合支架缓释系统具有优异的缓释性能,在该缓释系统上种植成骨诱导的骨髓间充质干细胞后,能够提高骨缺损修复的速度和质量。     

Hybrid scaffolds of Mg alloy mesh reinforced polymer/extracellular matrix composite for critical‐sized calvarial defect reconstruction

The challenge of developing scaffolds to reconstruct critical‐sized calvarial defects without the addition of high levels of exogenous growth factor remains relevant. Both osteogenic regenerative efficacy and suitable mechanical properties for the temporary scaffold system are of importance. In this study, a Mg alloy mesh reinforced polymer/demineralized bone matrix (DBM) hybrid scaffold was designed where the hybrid scaffold was fabricated by a concurrent electrospinning/electrospraying of poly(lactic‐co‐glycolic acid) (PLGA) polymer and DBM suspended in hyaluronic acid (HA). The Mg alloy mesh significantly increased the flexural strength and modulus of PLGA/DBM hybrid scaffold. In vitro results demonstrated that the Mg alloy mesh reinforced PLGA/DBM hybrid scaffold (Mg‐PLGA@HA&DBM) exhibited a stronger ability to promote the proliferation of bone marrow stem cells (BMSCs) and induce BMSC osteogenic differentiation compared with control scaffolding materials lacking critical components. In vivo osteogenesis studies were performed in a rat critical‐sized calvarial defect model and incorporated a variety of histological stains and immunohistochemical staining of osteocalcin. At 12 weeks, the rat model data showed that the degree of bone repair for the Mg‐PLGA@HA&DBM scaffold was significantly greater than for those scaffolds lacking one or more of the principal components. Although complete defect filling was not achieved, the improved mechanical properties, promotion of BMSC proliferation and induction of BMSC osteogenic differentiation, and improved promotion of bone repair in the rat critical‐sized calvarial defect model make Mg alloy mesh reinforced PLGA/DBM hybrid scaffold an attractive option for the repair of critical‐sized bone defects where the addition of exogenous isolated growth factors is not employed.     

骨髓间充质干细胞与脱细胞脑组织支架的生物相容性

背景：骨髓间充质干细胞与细胞载体联合移植治疗中枢神经系统损伤还处于实验研究阶段。目的：评价大鼠骨髓间充质干细胞与脱细胞脑组织支架的生物相容性,探讨脱细胞脑组织支架作为中枢神经系统组织工程材料的可行性。方法：以全骨髓法分离纯化大鼠骨髓间充质干细胞,通过物理及化学方法相结合制各脱细胞脑组织支架。将转染携带绿色荧光蛋白基因的骨髓间充质干细胞种植到支架材料上共培养,通过倒置相差显微镜、扫描电镜、激光共聚焦显微镜等方法观察脱细胞脑组织支架的内部结构及复合支架上细胞的生长状况。结果与结论：制备的脱细胞脑组织支架材料呈三维立体网状结构。骨髓间充质干细胞可在支架上黏附生长,形态良好。大鼠骨髓间充质干细胞与脱细胞脑组织支架具有良好的生物相容性,有望作为中枢神经系统组织工程的载体材料。     

腺病毒介导的BMP-2基因转染骨髓基质干细胞及种植异种骨支架的体外观察

目的　用人骨形态发生蛋白 2腺病毒表达载体 (Ad BMP 2 )转染的兔骨髓基质干细胞 (BMSC) ,种植BCB(去抗原牛松质骨 )支架体外构建组织工程骨。方法　蛋白印迹法检测转染后细胞BMP 2的表达 ,ALP活性检测分析基因转染对细胞分化的影响。然后将转染后细胞接种到BCB支架上 ,扫描电镜观察细胞贴附、生长状况。结果　转染后 ,BMSC表达BMP 2 ,ALP活性明显增高。扫描电镜见转染细胞分布均匀 ,伸展良好。结论　Ad BMP 2可高效转染BM SC ,且促进细胞分化。转染后细胞在BCB上生长良好 ,BMP 2基因治疗的组织工程骨构建成功     

仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原的制备及其细胞相容性

背景:目前骨组织工程常用的支架材料主要有无机材料、有机高分子材料及天然衍生材料等,上述材料各有优缺点,为了充分发挥各类材料的优势,弥补其不足,目前多采用联合材料制备复合支架。目的:制备新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原,并观察其对骨髓间充质干细胞增殖、黏附及分化的影响。方法:制备壳聚糖/纳米羟基磷灰石/胶原复合支架材料,扫描电镜观察支架材料表面微观形貌;采用真空吸附法将骨形态发生蛋白7多肽与支架材料复合,高效液相色谱仪检测骨形态发生蛋白7多肽在体外的释放规律;将骨髓间充质干细胞接种到复合骨形态发生蛋白7多肽的仿生支架材料上,以未复合多肽的支架材料作为对照,检测支架材料表面细胞增殖、黏附率、生长形态及碱性磷酸酶活性。结果与结论:壳聚糖/纳米羟基磷灰石/胶原支架材料呈多孔状,孔径10~100μm;骨形态发生蛋白7多肽可以从支架材料中缓慢释出;在复合多肽的仿生支架材料表面,骨髓间充质干细胞的黏附及向成骨细胞方向分化能力均明显强于对照组(P<0.05),而增殖能力与对照组差异无显著性意义(P>0.05)。说明新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原是一种理想的骨组织工程支架材料,具有良好的细胞相容性。     

Synergistic effect of scaffold composition and dynamic culturing environment in multilayered systems for bone tissue engineering

Bone extracellular matrix (ECM) is composed of mineralized collagen fibrils which support biological apatite nucleation that participates in bone outstanding properties. Understanding and mimicking bone morphological and physiological parameters at a biological scale is a major challenge in tissue engineering scaffolding. Using emergent (nano)technologies scaffold designing may be critically improved, enabling highly functional tissue substitutes for bone applications. This study aims to develop novel biodegradable composite scaffolds of tricalcium phosphate (TCPs) and electrospun nanofibers of poly(?‐caprolactone) (PCL), combining TCPs osteoconductivity with PCL biocompatibility and elasticity, mimicking bone structure and composition. We hypothesized that scaffolds with such structure/composition would stimulate the proliferation and differentiation of bone marrow stromal cells (BMSCs) towards the osteogenic phenotype. Composite scaffolds, developed by electrospining using consecutive stacked layers of PCL and TCPs, were characterized by FTIR spectroscopy, X‐Ray diffraction and scanning electronic microscopy. Cellular behavior was assessed in goat BMSCs seeded onto composite scaffolds and cultured in static or dynamic conditions, using basal or osteogenic media during 7, 14 or 21 days. Cellular proliferation was quantified and osteogenic differentiation confirmed by alkaline phosphatase activity, alizarin red staining and immunocytochemistry for osteocalcin and collagen I. Results suggest that PCL‐TCP scaffolds provide a 3D support for gBMSCs proliferation and osteogenic differentiation with production of ECM. TCPs positively stimulate the osteogenic process, especially under dynamic conditions, where PCL‐TCP scaffolds are sufficient to promote osteogenic differentiation even in basal medium conditions. The enhancement of the osteogenic potential in dynamic conditions evidences the synergistic effect of scaffold composition and dynamic stimulation in gBMSCs osteogenic differentiation. Copyright © 2012 John Wiley & Sons, Ltd.     

仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原的制备及其细胞相容性

背景：目前骨组织工程常用的支架材料主要有无机材料、有机高分子材料及天然衍生材料等,上述材料各有优缺点,为了充分发挥各类材料的优势,弥补其不足,目前多采用联合材料制备复合支架。目的：制备新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原,并观察其对骨髓间充质干细胞增殖、黏附及分化的影响。方法：制备壳聚糖/纳米羟基磷灰石/胶原复合支架材料,扫描电镜观察支架材料表面微观形貌;采用真空吸附法将骨形态发生蛋白7多肽与支架材料复合,高效液相色谱仪检测骨形态发生蛋白7多肽在体外的释放规律;将骨髓间充质干细胞接种到复合骨形态发生蛋白7多肽的仿生支架材料上,以未复合多肽的支架材料作为对照,检测支架材料表面细胞增殖、黏附率、生长形态及碱性磷酸酶活性。结果与结论：壳聚糖/纳米羟基磷灰石/胶原支架材料呈多孔状,孔径10~100μm;骨形态发生蛋白7多肽可以从支架材料中缓慢释出;在复合多肽的仿生支架材料表面,骨髓间充质干细胞的黏附及向成骨细胞方向分化能力均明显强于对照组（P〈0.05）,而增殖能力与对照组差异无显著性意义（P〉0.05）。说明新型仿生支架材料骨形态发生蛋白7多肽/壳聚糖/纳米羟基磷灰石/胶原是一种理想的骨组织工程支架材料,具有良好的细胞相容性。     

瓦楞状组织工程骨支架对种子细胞接种和成骨的影响

背景：不同形状工程骨支架负载种子细胞修复骨缺损的研究效果评价不一,而负载细胞数量的多少是影响疗效的重要因素之一,目前该方面研究证据不多。目的：自制瓦楞状组织工程骨支架和其他3种形状的支架,比较4种不同形状支架负载种子细胞的数量,以及瓦楞状组织工程骨支架体内成骨时凹槽的优势及特点。方法：①体外实验：将体积和样本数相同的4组支架分为单纯瓦楞状支架组、无瓦楞支架组、圆柱状支架组和带中空管柱状支架组,分别以相同密度、相同容积的成骨诱导兔骨髓间充质干细胞悬液接种于支架表面,孵育、培养、消化、收集,进行细胞计数、吸光度值检测以及碱性磷酸酶和茜素红染色。②体内实验：将兔随机分为重组人骨形态发生蛋白2/瓦楞状自固化磷酸钙人工骨组,瓦楞状自固化磷酸钙人工骨组和松质骨组,将体积相同的3组支架植入兔L_（5-6）两侧横突间,植入后4,8,12周行大体、组织学观察。结果与结论：体外实验显示,瓦楞状工程骨支架上滴注的细胞液能充分停留在表面,由于表面瓦楞状凹槽和液体的表面张力以及支架本身的无孔隙性使得细胞液不向培养皿流失,每个样本平均消化下来的正常形态的细胞数量高于其他3组（P〈0.05）,吸光度值差异无显著性意义（P〉0.05）。体内实验显示,各时间点重组人骨形态发生蛋白2/瓦楞状自固化磷酸钙人工骨组的成骨量比瓦楞状自固化磷酸钙人工骨组明显多（P〈0.05）,与松质骨组之间比较差异无显著性意义（P〉0.05）。结果证实,实验自制的瓦楞状工程骨支架的形状特点有利于种子细胞负载,从数量上保证了接种种子细胞的有效性,可促进支架大量成骨和段状骨缺损的愈合。