The outcome of rerevision of an extensively porous-coated stem with another extensively porous-coated stem

Despite excellent results, failure of osseointegration does occur in femoral revisions performed with extensively porous-coated stems. This study examined the outcome of rerevision of a failed extensively porous-coated femoral stem with yet another extensively porous-coated stem. Between 1980 and 2000, we performed 711 femoral revisions using an extensively porous-coated device. Fifteen patients (16 hips) were known to have undergone a rerevision of this femoral component using another porous-coated stem. At latest follow-up, 2 patients (3 hips) were deceased, leaving 13 patients. At a mean follow-up of 9.8 years, none of the cementless stems had required another revision (100% survivorship), and 12 (92%) of the 13 stems were bone ingrown based on radiographic examination.     

Cementless Modular Total Hip Arthroplasty in Patients Younger than Fifty with Femoral Head Osteonecrosis: Minimum Fifteen-Year Follow-Up

This study aimed to report the outcome of total hip arthroplasty (THA) with a modular femoral component in patients younger than fifty years with osteonecrosis of femoral head. Sixty-four osteonecrotic hips in fifty-five patients were available for clinical and radiographic analyses at minimum follow-up of fifteen-years. The mean Harris hip score improved from 36 points preoperatively to 92.7 points at final follow-up. Sixty-two (95.3%) hips demonstrated stable bone ingrowth. No hips showed loosening or required revision for aseptic loosening. Survivorship with an end point of stem revision for any reason was 93.8% and for aseptic loosening was 100% at 16.8 years. We believe that cementless THA with a modular stem is a promising procedure for young and active patients with osteonecrosis of the femoral head.     

Total hip arthroplasty using porous-coated femoral components in patients with rheumatoid arthritis

We studied the results of total hip arthroplasty (THA) using AML porous-coated femoral components at a mean follow-up of 11 years in a non-selected, consecutive series of patients with rheumatoid arthritis. We reviewed 64 patients with 82 primary THAs using these components. There were seven men (8 hips) and 57 women (74 hips) with a mean age of 55.1 years (24 to 80) at the time of surgery. Nine patients (11 hips) died before the two-year follow-up. Of the remaining 71 hips, only one stem was revised for aseptic loosening. Survivorship for the stems was 98.1% (95% confidence interval (CI) 94.5 to 100.0) at ten years, using a life-table analysis, with revision for any reason as an endpoint. Of the 70 unrevised stems, 66 (94%) had bony ingrowth, while four (6%) were radiologically loose at the most recent follow-up (mean 11.4 years). Our study shows the excellent long-term results which can be achieved with porous-coated femoral components in patients with rheumatoid arthritis.     

Total hip arthroplasty for acute femoral neck fractures using a cementless tapered femoral stem

The purpose of this study was to evaluate the osseointegration potential and implant-related complications of cementless total hip arthroplasty with a titanium alloy collarless, tapered, wedge-shaped femoral stem with a proximal circumferential plasma-spray coating in patients with acute hip fractures. The cohort consists of 85 patients with a mean age of 78.1 years. The mean duration of follow-up was 3.8 years. Total hip arthroplasty conferred significant improvement in function for all patients. All femoral components were stable with evidence of bone ingrowth (84 hips) or fibrous fixation (1 hip). Mild thigh pain was present in 3 patients. The complications included dislocation (3 cases), intraoperative femoral fracture (2 cases), and periprosthetic femoral fracture in the postoperative period (1 case). There was one reoperation for revision of the femoral component in the patient with a periprosthetic fracture. There were 25 (29%) deaths. Cementless total hip arthroplasty using a tapered proximally coated femoral stem is a viable option for the treatment of a displaced hip fracture and preexistent arthritis.     

Second- and third-generation Omniflex modular femoral stem: results 3 to 8 years after surgery

Primary cementless total hip arthroplasty (THA) using the Omniflex modular femoral stem was conducted on 73 hips in 70 patients. The arc deposition (AD)-type stem was used in 26 hips, and the hydroxyapatite (HA)-type stem was used in 47 hips. The mean follow-up period of patients in the AD group was 78 (range, 61-96) months and that of patients in the HA group was 52 (range, 36-61) months. Clinically, improvement in the Harris hip score occurred in all cases. Thigh pain was reported in 3 (11.5%) AD hips and in 1 (2.1%) HA hip. Radiologically, bone ingrowth fixation was seen in 88.5% of the AD group and in 97.9% of the HA group. No subtrochanteric stress shielding, stem migration of > 2 mm, or revision THA occurred. The second- and third- generation Omniflex stems are useful cementless devices resulting in favorable initial biologic fixation and little bone atrophy at mid-term follow-up.     

应用LCU股骨柄假体行全髋置换术的早期疗效

目的探讨应用LCU股骨柄假体行生物学固定型全髋关节置换术(total hip arthroplasty,THA)的早期疗效。方法回顾性分析2011年8月至2013年4月采用LCU股骨柄假体行THA术85例(90髋),男26例(28髋),女59例(62髋);年龄19~83岁,平均55岁;平均体重指数(23.33±3.13)kg/m2。单髋80例,双髋5例。发育性髋关节发育不良34例(38髋),股骨颈骨折14例(14髋),股骨头坏死17例(17髋),原发性髋关节骨关节炎18例(19髋),类风湿性髋关节炎1例(1髋),髋关节结核1例(1髋)。股骨侧假体均采用LCU股骨柄假体。髋臼采用陶瓷-陶瓷界面者78髋,陶瓷-聚乙烯12髋。对术后及随访时的影像学资料进行分析,末次随访时采用髋关节Harris评分标准评定疗效。结果 82例(87髋)患者术后获得随访,随访12~32个月,平均19个月,3例失访。术前髋关节功能Harris评分为(33.73±3.21)分,末次随访时髋关节功能Harris评分改善至(92.84±4.47)分,与术前比较差异有统计学意义(t=242.69,P0.01)。末次随访时大腿轻度疼痛1例,中度疼痛1例,无重度疼痛。末次随访时无一例出现骨溶解、假体松动,按Engh标准评定:所有获访者均获骨长入固定,其中股骨侧假体诊断为骨性固定者85髋,诊断为纤维性稳定者1髋。假体下沉小于2 mm者1髋,其余均无假体下沉。结论 LCU股骨柄假体行生物学固定型THA的早期疗效满意。     

Revision Total Hip Arthroplasty With a Modular Cementless Femoral Stem

We retrospectively reviewed 123 patients who underwent cementless THA with modular femoral stem designs for revision THA or conversion of failed ORIF and found 75 patients available for analysis. The Harris Hip Score (HHS) improved from 52 ± 14 to 86 ± 11 (P < 0.001). The femoral stem was re-revised in eight patients (11%). The mean time to re-revision was 1.1 years (0.13–2.54). Reasons for re-revision included infection (n = 5, 7%), aseptic loosening (n = 2, 3%) and significant pain (n = 1, 1%). There were no failures of the modular junctions. PC stems had an increased rate of intraoperative fractures (PC 28% vs. STS 9%, P = 0.04). Modular cementless femoral stems provide acceptable mid-term results in revision THA.     

Two-year to five-year follow-up of femoral defects in femoral revision treated with the link MP modular stem

Femoral deficiency has been shown to adversely affect the results of revision total hip arthroplasty. Tapered titanium modular stems allow distal fixation of the fluted, conical portion of the implant in the setting of proximal bone loss. One hundred two consecutive hips with proximal bone loss underwent revision femoral reconstruction between 1998 and 2002 at 3 centers using the Link MP modular stem. Forty-three hips had Mallory type 3C femoral deficiency. Ninety-seven hips were observed for an average of 45 months (range, 24-72; median, 36 months). Clinically, mean Harris hip score improved from 36 to 84 (range, 54-99). Radiographically, 93 hips were considered stable, with no circumferential lucencies at the distal fixation surface. Three hips migrated and required revision, along with one periprosthetic fracture. Five other hips had nonprogressive migration of 1 to 2 mm.     

锥形钛合金非骨水泥股骨柄全髋关节置换术34例随访一年X线结果分析

目的观察最新一代锥形钛合金非骨水泥股骨柄于术后1年是否稳定及股骨柄周围骨的重构方式。方法对采用最新一代锥形钛合金非骨水泥股骨柄全髋关节置换的34侧髋关节（28例），进行定期随访，平均随访15个月，对术前、术后近期及术后1年的X线片（股骨部分）进行测量，将测量结果进行统计分析。结果在股骨柄的中1／3普遍存在骨与假体之间的“焊接点”；没有破体移位、“筑基”形成，以及金属颗粒滑脱；除1例外，其余病例出现股骨距的重吸收；27髋出现股骨距松质化；在非涂层部分出现反应线的有19髋；非骨水泥股骨柄固定及稳定评分，平均总分为＋24．1分。结论所有股骨柄于术后1年X线片上都被确认有骨长入。     

Metaphyseal‐Loading Anterolaterally‐Flared Femoral Stem in Cementless Total Hip Arthroplasty: Five‐ to Eleven‐Year Follow‐Up Evaluation

Using a nonlinear three‐dimensional finite element analysis simulating loading conditions, we designed a new type of proximal‐fitting, anterolaterally‐flared, arc‐deposit hydroxyapatite‐coated anatomical femoral stem (FMS‐anatomic stem; Japan Medical Materials, Osaka, Japan) for cementless total hip arthroplasty (THA) for Japanese patients with dysplastic hip osteoarthritis. The aim of the present study was to analyze the clinical and radiographic outcomes of the new stem. We reviewed 143 consecutive patients (164 hips; 13 men, 14 hips; 130 women, 150 hips; age at surgery, 56.6 ± 7.6 years, mean ± SD, range, 30–74) who underwent cementless THA using the FMS‐anatomic stem at a single institution, with a follow‐up period of 7.6 ± 1.6 years (range, 5.3–11.0). Harris Hip score improved from 46.1 ± 12.6 before surgery to 90.0 ± 8.9 points post‐THA. The 7.6‐year survival rate of the stem was 99.0% after revision for aseptic loosening. Radiographs at follow‐up confirmed the stability of the femoral stems within the femoral canal in all cases, with sufficient bone ingrowth. None of the patients had subsidence of the stem exceeding 2.0 mm within the femoral canal or changes in varus or valgus position of more than 2.0°. The FMS‐anatomic stem provided excellent results in patients with dysplastic hip osteoarthritis. Our analysis confirmed reduced radiolucency around the stem in Gruen zones, minimal subsidence, appropriate stress shielding, and promising medium‐term stability within the femoral canal in our patients.     

Primary total hip arthroplasty using a modular proximally coated prosthesis in patients older than 70: two to eight year results

Patients older than 70 years who underwent primary total hip arthroplasty using a modular proximally porous-coated femoral stem with an ingrowth hemispherical acetabular component were evaluated. This included 135 hips in 122 patients, with an average 5-year follow-up period. This study included 96 patients (107 hips) still living; 26 patients (28 hips) patients had died, and 8 patients were lost to follow up. In this study, 93% of patients had little or no pain, and 95% were extremely or very satisfied with the operation. Mean Harris Hip score was 83, with a Short Form-36 (SF-36) physical component and mental component summary score of 41 and 51, respectively. Osteolysis surrounding the femur was seen in 8 hips (7%) and around the acetabulum in 6 hips (5%). No components were loose or required revision.     

Hip arthroplasty after failed free vascularized fibular grafting for osteonecrosis in young patients

This study reports the results of total hip arthroplasty (THA) for osteonecrosis after failed free vascularized fibular grafting (FVFG) at a 5-year minimum follow-up. In this study, 73 patients (89 THA) were treated for failed FVFG, and survival of THA was discussed. Clinical outcome was measured using a pain and function survey (possible 91 points) in 84 hips and Harris Hip scores (HHS, 100 possible points) for 52 hips. Survival was 94.4% at 5 years, 85.4% at 10 years, and 82% overall. Average HHS at final follow-up improved to 77.5 (P <.05). The average clinical result after THA was 68 of 91 points. In this study, 58% of patients had a good or excellent HHS. The overall revision rate for proximal ingrowth stems was 13% at an average follow-up of 9.1 years. Only 4 patients required stem revision for loosening (7.4%). THA after FVFG provides improved functional results comparable to the published results of primary THA in osteonecrosis in young patients.     

Long-Term Results of Revision Total Hip Arthroplasty Using a Modern Extensively Porous-Coated Femoral Stem

BackgroundThe use of an extensively porous-coated uncemented cobalt-chrome monoblock femoral stem for revision total hip arthroplasty (THA) is well established with excellent mid-term results. The aim of this study is to report the long-term survivorship of these implants in femoral stem revisions.MethodsThis is a long-term retrospective review of prospectively collected data of 55 femoral stem revisions in 55 patients using a contemporary, cementless extensively porous-coated cobalt-chrome monoblock stem. All patients between 2001 and 2006 who underwent first time femoral stem revision with a contemporary, cementless extensively porous-coated cobalt-chrome monoblock stem were included. Harris Hip Score, Western Ontario and McMaster Universities Index, and University of California Los Angeles activity scores were recorded preoperatively and at latest follow-up. Radiographs were analyzed for evidence of loosening, subsidence, osteolysis, and bony union. This study included 55 patients, comprising of 36 females (66%) and 19 males (34%) with a mean age of 66.4 ± 9.3 years at the time of surgery. The mean time interval from index procedure was 9.8 ± 2.9 years. Mean time from revision THA to final follow-up was 13.2 ± 2.17 years with a minimum of 10 years of follow-up.ResultsIndications for revision included aseptic loosening (33), prosthetic joint infection (13), and periprosthetic fracture (10). Significant improvement in Harris Hip Score (85.1 ± 1.77 vs 51.8 ± 2.3, P < .001), Western Ontario and McMaster Universities Index (17.6 ± 0.77 vs 33.3 ± 0.8, P < .001), and University of California Los Angeles (5.25 ± 0.2 vs 2.7 ± 0.36, P < .001) scores were found at latest follow-up compared to preoperative. Fifty-four patients (98%) achieved stable bony ingrowth on radiographic analysis. All 10 patients treated for periprosthetic fractures achieved bony union of their fractures. Two patients suffered intraoperative periprosthetic fractures and were treated with a cable-plating system. There were no mechanical failures and no femoral stem re-revisions. One patient was diagnosed with a deep infection and was treated with chronic suppressive antibiotic therapy due to significant medical comorbidities.ConclusionRevision of the femoral component with a contemporary extensively porous-coated cobalt-chrome femoral stem has excellent functional outcomes, radiographic outcomes, and long-term survivorship with minimal complications.     

Midterm Results of Large Diameter Biolox Forte Ceramic Head on Delta Ceramic Liner Articulation in Total Hip Arthroplasty

Seventy-nine patients (94 hips), who underwent cementless alumina-on-alumina total hip arthroplasty (THA) with the use of a 36-mm delta ceramic liner-on-alumina ceramic femoral head, were followed for an average of 6.5 years (range, 5–7.7 years). All acetabular and femoral components were bone-ingrown and neither pelvic nor femoral osteolysis was identified until the latest follow-up. The survivorship with revision surgery as an endpoint was 97.9% (95% confidence interval = 100%–95%). Ceramic related complications such as fracture and squeaking did not occur in any patient. The mid-term results of cementless THA with this type of ceramic articulation are encouraging.     

Second-generation cementless total hip arthroplasty. Eight to eleven-year results.

BACKGROUND: Second-generation cementless femoral components were designed to provide more reliable ingrowth and to limit distal osteolysis by incorporating circumferential proximal ingrowth surfaces. We examined the eight to eleven-year results of total hip arthroplasty with a cementless, anatomically designed femoral component and a cementless hemispheric acetabular component. METHODS: Ninety-two consecutive primary total hip arthroplasties with implantation of a femoral component with a circumferential proximal porous coating (Anatomic Hip) and a cementless hemispheric porous-coated acetabular component (Harris-Galante II) were performed in eighty-five patients. These patients were prospectively followed clinically and radiographically. Six patients (seven hips) died and five patients (seven hips) were lost to follow-up, leaving seventy-four patients (seventy-eight hips) who had been followed for a mean of ten years (range, eight to eleven years). The mean age at the time of the arthroplasty was fifty-two years. RESULTS: The mean preoperative Harris hip score of 51 points improved to 94 points at the time of final follow-up; 86% of the hips had a good or excellent result. Thigh pain was reported as mild to severe after seven hip arthroplasties. No femoral component was revised for any reason, and none were loose radiographically at the time of the last follow-up. Two hips underwent acetabular revision (one because of dislocation and one because of loosening). Kaplan-Meier survivorship analysis was performed with revision or loosening of any component as the end point. The ten-year survival rate was 96.4% +/- 2.1% for the total hip prosthesis, 100% for the femoral component, and 96.4% +/- 2.1% for the acetabular component. Radiolucencies adjacent to the nonporous portion of the femoral component were seen in sixty-eight (93%) of the -seventy-three hips with complete radiographic follow-up. Femoral osteolysis proximal to the lesser trochanter was noted in four hips (5%). No osteolysis was identified distal to the lesser trochanter. Periacetabular osteolysis was identified in twelve hips (16%). Five patients underwent exchange of the acetabular liner because of polyethylene wear. CONCLUSIONS: This second-generation cementless, anatomically designed femoral component provided excellent clinical and radiographic results with a 100% survival rate at ten years. The circumferential porous coating of this implant improved ingrowth and prevented distal osteolysis at a mean of ten years after the arthroplasty.     

Revision Total Hip Arthroplasty With Modular Femoral Stems

As the rate of revision total hip arthroplasty (THA) rises, attention must be paid to potential complications relating to bone loss, soft tissue deficiencies, and loss of tissue planes. Using modular femoral stems in revision surgery allows for varying amounts of bone loss in the proximal and distal femur while letting the surgeon adjust rotation, leg length, and offset. We retrospectively reviewed 125 patients that underwent revision THA with a modular femoral component system and had minimum 2 year follow-up. Ten patients required reoperations for infection, recurrent dislocation, or fracture treatment. There was no evidence of radiographic loosening or mechanical failure in the remaining patients. Modular femoral components provide excellent intraoperative flexibility and significant radiographic and clinical benefits as seen in this patient cohort.     

Patterns of osseointegration and remodeling in femoral revision with bone loss using modular, tapered, fluted, titanium stems

Radiographic signs of osseointegration with the use of fluted, tapered, modular, titanium stems in revision hip arthroplasty with bone loss have not been previously categorized. Serial radiographs of 64 consecutive hips with mean follow-up of 6.2 years were retrospectively reviewed. Bone loss was classified as per Paprosky classification, osseointegration was assessed according to a modified system of Engh et al, and Harris Hip Score was used to document pain and function. Seventy-four percent of the hips had type 3 or 4 bone loss. All stems were radiographically osseointegrated. Early minor subsidence was seen in 6.2% of the hips; definite bony regeneration, 73% of the hips; and stress shielding, 26% of the hips. These osseointegration patterns were different from those described for extensively porous-coated cobalt-chromium stems and had a bearing on the evaluation of fixation of these stems.     

Poor Short Term Outcome with a Metal-On-Metal Total Hip Arthroplasty

Metal-on-metal (MoM) bearings for total hip arthroplasty (THA) have come under scrutiny with reports of high failure rates. Clinical outcome studies with several commercially available MoM THA bearings remain unreported. We evaluated 78 consecutive MoM THAs from a single manufacturer in 68 patients. Sixty-six received cobalt–chrome (CoCr) monoblock and 12 received modular titanium acetabular cups with internal CoCr liners. Femoral components were titanium with modular necks. At average 2.1 years postoperatively, 12 THAs (15.4%) demonstrated aseptic failure (10 revisions, 2 revision recommended). All revised hips demonstrated capsular necrosis with positive histology reaction for aseptic lymphocytic vasculitis-associated lesions/adverse local tissue reactions. Prosthetic instability following revision surgery was relatively common. Female gender was a strong risk factor for failure, though smaller cups were not. Both monoblock and modular components fared poorly. Corrosion was frequently observed around the proximal and distal end of the modular femoral necks.     

Proximal Femoral Arthroplasty in Patients Undergoing Revision Hip Arthroplasty

Bone loss represents one of the greatest challenges in revision joint surgery. A retrospective review was conducted of both radiographic and clinical outcomes of eleven patients who underwent revision arthroplasty using a long extensively porous coated cylindrical femoral component. All patients' femurs presented with severe proximal femoral bone loss (Paprosky class IIIB and IV). With a mean follow-up of 8 years (2 to 14) we report no femoral revisions and one acetabular revision to a constrained cup secondary to instability. All patients were clinically and radiographically stable. We did not observe any issue with proximal stress shielding or component loosening. The article reports that in patients with severe proximal femoral bone loss, extensively porous-coated non-modular stems are a viable option offering stable and predictable outcomes.