首页 | 本学科首页   官方微博 | 高级检索  
检索        

提高铸造陶瓷全冠粘接强度的研究
引用本文:王华蓉,樊瑜波.提高铸造陶瓷全冠粘接强度的研究[J].华西医科大学学报,1998,29(3):278-280.
作者姓名:王华蓉  樊瑜波
作者单位:[1]口腔医学院修复学教研室 [2]四川联合大学
摘    要:为考察不同粘接剂对Plat-Ⅱ型铸造陶瓷全冠粘接于牙体后的整体强度的影响,选用Panavia21树脂粘接剂和Porcelite dual cure ecment树脂粘接剂,分别检测粘接后试件的破坏载荷。结果表明:Panavia21粘接的破坏载荷(845.8±137.1N)高于Puorcelite粘接的破坏载荷(534.0±58.7N),两者间有显著性差异(P〈0.05),且超过咀嚼过程中产生的正常

关 键 词:铸造陶瓷  全冠  粘接剂  整体强度

Improving the bonding strength of castable ceramic crowns]
H Wang,Y Zhao,Y Li,Y Fan.Improving the bonding strength of castable ceramic crowns][J].Journal of West China University of Medical Sciences,1998,29(3):278-280.
Authors:H Wang  Y Zhao  Y Li  Y Fan
Institution:Department of Oral Prosthodontics, School of Stomatology, Chengdu.
Abstract:To study the influence of bonding agent on fracture strength of Plat-II castable ceramic crowns bonded to molars, we tested the specimens in vitro with Panavia 21 resin bonding agent and porcelite dual cure cement. The results showed that the fracture loading (845.8 +/- 137.1 N) of crowns bonded with Panavia 21 bonding agent was higher than that (534.0 +/- 58.7 N) of crows bonded with porcelite dual cure cement. The difference between the two agents was statistically significant (P < 0.05). The crowns bonded with Panavia 21 agent had higher strength than bite forces. These suggest that costable ceramic crowns could be bonded with Panavia 21 resin agent in clinical practice.
Keywords:
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号