首页 | 本学科首页   官方微博 | 高级检索  
     

PEG修饰姜黄素固体脂质纳米粒的制备、表征及溶出特征
引用本文:侯文书,张丹参,张力,武春阳,任婧,张楠. PEG修饰姜黄素固体脂质纳米粒的制备、表征及溶出特征[J]. 中草药, 2019, 50(8): 1927-1934
作者姓名:侯文书  张丹参  张力  武春阳  任婧  张楠
作者单位:河北北方学院, 河北 张家口 075000,河北科技大学, 河北 石家庄 050000,河北北方学院, 河北 张家口 075000,河北北方学院, 河北 张家口 075000,河北科技大学, 河北 石家庄 050000,河北科技大学, 河北 石家庄 050000
基金项目:国家自然科学基金资助项目(81202192);河北省中医药管理局项目(2013075);河北省卫生厅项目(20130034)
摘    要:目的制备具有缓释作用的姜黄素固体脂质纳米粒(curcumin solid lipid nanoparticles,Cur-SLN)和长循环固体脂质纳米粒(long-circulating solid lipid nanoparticles,LSLN),并对2种纳米粒的理化性质进行考察。方法采用乳化-超声法制备Cur-SLN,并对最优处方下制备的Cur-SLN进行包封率和载药量的测定,采用后插法制备Cur-LSLN,并考察Cur-SLN和Cur-LSLN的粒径、Zeta电位,差示扫描量热法(DSC)分析姜黄素在纳米粒中的存在状态,透射电镜观察两者的形态,透析法进行体外释放实验。结果最优处方下制备的Cur-SLN和Cur-LSLN的外观为球形及类球形,包封率分别为(89.15±0.66)%、(92.97±0.27)%,载药量分别为(1.72±0.08)%、(1.98±0.08)%,粒径分别为(144.5±4.1)、(155.0±2.6)nm,Zeta电位分别为(-23.6±0.2)、(-47.8±1.8)m V,通过DSC检测,可确定纳米粒中的Cur已转变为无定形态,体外释放实验结果显示,2种制剂的药物释放分为突释期和缓释期,均在12 h内释放较快,Cur-SLN在96 h累积释放86.63%,Cur-LSLN在96h累积释放76.98%,Cur-LSLN表现出更好的缓释效果。结论采用乳化-超声法可成功制备Cur-SLN和Cur-LSLN,PEG修饰后的纳米粒有更好的缓释性能,可延长药物在体内存在的时间,为靶向药物的开发做了铺垫。

关 键 词:姜黄素  固体脂质纳米粒  乳化-超声法  PEG修饰  缓释作用
收稿时间:2018-08-13

Preparation, characterization and dissolution characteristics of curcumin solid lipid nanoparticles modified with PEG
HOU Wen-shu,ZHANG Dan-shen,ZHANG Li,WU Chun-yang,REN Jing and ZHANG Nan. Preparation, characterization and dissolution characteristics of curcumin solid lipid nanoparticles modified with PEG[J]. Chinese Traditional and Herbal Drugs, 2019, 50(8): 1927-1934
Authors:HOU Wen-shu  ZHANG Dan-shen  ZHANG Li  WU Chun-yang  REN Jing  ZHANG Nan
Affiliation:Hebei North University, Zhangjiakou 075000, China,Hebei University of Science and Technology, Shijiazhuang 050000, China,Hebei North University, Zhangjiakou 075000, China,Hebei North University, Zhangjiakou 075000, China,Hebei University of Science and Technology, Shijiazhuang 050000, China and Hebei University of Science and Technology, Shijiazhuang 050000, China
Abstract:Objective The sustained release curcumin solid lipid nanoparticles (Cur-SLN) and long circulating solid lipid nanoparticles (LSLN) were prepared, and the physicochemical properties of the two nanoparticles were investigated. Methods Cur-SLN was prepared by emulsification ultrasonic method, and then the entrapment efficiency and drug loading of Cur-SLN prepared under the optimal formulation were determined. Cur-LSLN was prepared by back-extrapolation method, and the physicochemical properties of Cur-SLN and Cur-LSLN were evaluated by entrapment efficiency, drug loading, particle size, and Zeta potential; DSC was used to analyze, in vitro release characteristics and the transmission electron microscope (TEM) was used to observe particle appearance. Results Based on the optimal conditions, TEM showed that the appearance of Cur-SLN and Cur-LSLN were spherical or nearly spherical, the entrapment efficiency respectively were (89.15 ±0.66)% and (92.97 ±0.27)%, drug loading were (1.72 ±0.08)% and (1.98 ±0.08)%, average diameters of particles were (144.5 ±4.1) nm and (155.0 ±2.6) nm, and the mean Zeta potential were (−23.6 ±0.2) mV and (−47.8 ±1.8) mV. Through DSC detection, it can be determined that Cur in nanoparticles had been transformed into amorphous state. In vitro release test showed that the drug release of the two preparations was divided into two stages: burst release phase and sustained released stage, the release rate was fast in 12 h, and the cumulative release of Cur-SLN in 96 h was 86.63%, and Cur-LSLN was 76.98%, so Cur-LSLN showed better sustained-release effect. Conclusion Cur-SLN and Cur-LSLN can be successfully prepared by emulsification ultrasonic method, and PEG modified nanoparticles have better sustained-release properties and prolong the time of the presence of drug in vivo, providing reference for the development of targeted drugs.
Keywords:curcumin  solid lipid nanoparticles  emulsification-ultrasonic method  PEG modification  sustained-release effect
本文献已被 CNKI 等数据库收录!
点击此处可从《中草药》浏览原始摘要信息
点击此处可从《中草药》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号