Parametric dependence of myocardial blood oxygen level dependent,balanced steady‐state free‐precession imaging at 1.5 T: Theory and experiments

Myocardial blood oxygen level dependent, balanced steady‐state free precession (bSSFP) imaging is a relatively new technique for evaluating myocardial oxygenation changes in the presence of coronary artery stenosis. However, the dependence of myocardial bSSFP blood oxygen level dependent signal on imaging parameters has not been well studied. In this work, modeling capillaries as cylinders that act as magnetic perturbers, the Monte Carlo method was used to simulate spin relaxation via diffusion in a field variation inside and outside blood vessels. bSSFP signal changes at various levels of capillary blood oxygen saturation, for a range of pulse repetition times, flip angle, capillary blood volume fraction, vessel wall permeability, water diffusion coefficient, vessel angle to static magnetic field, and the impact of bulk frequency shifts were studied. The theoretical dependence of bSSFP blood oxygen level dependent contrast on pulse repetition times and flip angle was confirmed by experiments in an animal model with controllable coronary stenosis. Results showed that, with the standard bSSFP acquisition, optimum bSSFP blood oxygen level dependent contrast could be obtained at pulse repetition times = 6.0 ms and flip angle = 70°. Additional technical improvements that preserve the image quality may be necessary to further increase the myocardial bSSFP blood oxygen level dependent sensitivity at 1.5 T through even longer pulse repetition times. Magn Reson Med, 2010. © 2010 Wiley‐Liss, Inc.