Intra-coronary guidewire mapping–A novel technique to guide ablation of human ventricular tachycardia

Hypothesis Endocardial catheter ablation of ventricular tachycardia (VT) may fail if originating from epicardial or intramural locations. We hypothesized that mapping could be achieved using an angioplasty guidewire in the coronary circulation, to guide trans-coronary ablation. Methods and results Six patients (2 male), 64 ± 14 years and previously unsuccessful endocardial VT ablation were studied. Using ECG and existing endocardial mapping data, a coronary artery supplying the predicted VT origin was selected. A 0.014-in angioplasty guidewire was advanced into branches of the artery and connected to an amplifier to record unipolar signals against an indifferent electrode within the inferior vena cava. An uninflated angioplasty balloon was advanced over the wire such that only the distal 5 mm was used for mapping. One VT per patient was mapped (CL 348 ± 102.1 ms). Diastolic potentials were recorded from all (77.7 ± 43.8 ms pre-QRS onset) and concealed entrainment demonstrated in 3. Pacemapping during sinus rhythm was used in the remainder due to failure of entrainment (n = 2) or degeneration to VF (n = 1). Following branch identification, cold saline injection causing VT termination was used for further confirmation. Five VTs were ablated using intra-coronary ethanol injection via the central lumen of the inflated over the wire balloon. The other was ablated using radiofrequency energy in a coronary vein adjacent to the target artery, which was too small for an angioplasty balloon. No complications or recurrence of ablated VT was seen over 19 ± 17 months of follow up. Conclusions Intracoronary guidewire mapping is a novel method of electrophysiological epicardial mapping to help guide trans-coronary VT ablation. Supporting Grants: British Heart Foundation Project Grant PG/2001030, London, UK