Performance of CHROMagar selective medium and oxacillin resistance screening agar base for identifying Staphylococcus aureus and detecting methicillin resistance

Two new selective media, oxacillin resistance screening agar base (ORSAB) and CHROMagar Staph aureus (CSA), were evaluated for identification of Staphylococcus aureus and for screening of methicillin resistance by addition of antimicrobial agents to these media. A well-defined collection consisting of 1,140 staphylococci was used. A total of 624 were S. aureus, of which 358 were methicillin susceptible and 266 were methicillin resistant, and 516 were coagulase-negative staphylococci. The methicillin-resistant S. aureus (MRSA) strains were selected based on the results of phage typing; 247 different types were included in the analysis. For identification of S. aureus, both media performed better after 24 h than after 48 h. The sensitivities at 24 h were comparable (CSA, 98.6%; ORSAB, 97.1%), but the specificity of CSA was significantly higher (CSA, 97.1%; ORSAB, 92.1%). For screening of methicillin resistance, antibiotic supplements were added to both media. The sensitivity was lower after 24 h (CSA, 58.6%; ORSAB, 84.2%) and increased significantly after 48 h (CSA, 77.5%; ORSAB, 91.4%). At both time intervals ORSAB was significantly more sensitive than CSA. However, the specificities of both media were high after 24 h (CSA, 99.1%; ORSAB, 98.3%) and decreased significantly after 48 h of incubation (CSA, 94.7%; ORSAB, 95.5%). In conclusion, for identification of S. aureus, CSA is more accurate than ORSAB because of a significantly higher specificity. For screening of MRSA, ORSAB performs better than CSA, but the usefulness in clinical practice is limited because a significant number of strains are not detected.