Effect of silica coating and silane surface treatment on the bond
strength of soft denture liner to denture base material |
| |
Authors: | Saadet ATSü Yasemin KESK?N |
| |
Institution: | 1. Professor, Department of Prosthodontics, Kırıkkale University, Faculty of Dentistry, Kırıkkale, Turkey. ;2. Professor, Department of Prosthodontics, Ankara University, Faculty of Dentistry, Ankara, Turkey. |
| |
Abstract: | ObjectiveThis study investigated the effects of different surface treatments on the tensile
bond strength of an autopolymerizing silicone denture liner to a denture base
material after thermocycling. Material and MethodsFifty rectangular heat-polymerized acrylic resin (QC-20) specimens consisting of a
set of 2 acrylic blocks were used in the tensile test. Specimens were divided into
5 test groups (n=10) according to the bonding surface treatment as follows: Group
A, adhesive treatment (Ufi Gel P adhesive) (control); Group S, sandblasting using
50-µm Al2O3; Group SCSIL, silica coating using 30-µm
Al2O3 modified by silica and silanized with silane agent
(CoJet System); Group SCA, silica coating and adhesive application; Group SCSILA,
silica coating, silane and adhesive treatment. The 2 PMMA blocks were placed into
molds and the soft lining materials (Ufi Gel P) were packed into the space and
polymerized. All specimens were thermocycled (5,000 cycles) before the tensile
test. Bond strength data were analyzed using 1-way ANOVA and Duncan tests.
Fracture surfaces were observed by scanning electron microscopy. X-ray
photoelectron spectrometer (XPS) and Fourier Transform Infrared spectrometer
(FTIR) analysis were used for the chemical analysis and a profilometer was used
for the roughness of the sample surfaces. ResultsThe highest bond strength test value was observed for Group A (1.35±0.13); the
lowest value was for Group S (0.28±0.07) and Group SCSIL (0.34±0.03). Mixed and
cohesive type failures were seen in Group A, SCA and SCSILA. Group S and SCSIL
showed the least silicone integrations and the roughest surfaces. ConclusionSandblasting, silica coating and silane surface treatments of the denture base
resin did not increase the bond strength of the silicone based soft liner.
However, in this study, the chemical analysis and surface profilometer provided
interesting insights about the bonding mechanism between the denture base resin
and silicone soft liner. |
| |
Keywords: | Denture bases Denture liners Surface properties Tensile strength |
|
|