Effect of chemical structure and composition of the resin phase on mechanical strength and vinyl conversion of amorphous calcium phosphate-based composites

The mechanical properties of recently developed bioactive, antidemineralizing/remineralizing, amorphous calcium phosphate (ACP)-based composites need improvement. The objective of this study was to elucidate the effect of structure and composition of resins on the biaxial flexure strength (BFS) and the degree of conversion (DC) of composites attained after photo-polymerization. Two series of 2,2-bis[p-(2'-hydroxy-3'-methacryloxypropoxy)phenyl]propane (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA)/X (X being a neutral or acidic comonomer) ternary resins were prepared and mixed with a mass fraction of 40% of zirconia-hybridized ACP. Both unfilled copolymers and their composites were evaluated for BFS (dry and wet specimens after 2 weeks of immersion in buffered saline) and for DC (after 24 h at 23 degrees C). It was found that for the neutral X monomers, no correlation existed between the hydrophobic/hydrophilic character of the X monomer and the BFS values of the immersed composites. A flexible monomethacrylate yielded copolymers and composites with the highest DC. For the resins utilizing the acidic comonomers, methacrylic acid and mono-4-(methacryloyloxy) ethyltrimellitate (4MET), dry composites with improved BFS values were obtained. 4MET composites exhibited the least loss of strength of all the ternary resin ACP materials. The effect of acidic X on DC was most pronounced for maleic acid copolymers.