Effect of chamfer design on load capacity of reattached incisors

ObjectiveThis study aimed to evaluate the effect of different chamfer preparations on the load capacity of reattached fractured incisors under lingual loading.MethodsEighty #8 typodonts were randomly assigned to four groups (n = 20 each). They were sectioned to simulate crown fracture, and reattached with a self-etch adhesive and a resin composite. The preparation for each group was: (1) no chamfer; (2) buccal chamfer; (3) lingual chamfer; and (4) circumferential chamfer. Forty-eight human lower incisors were grouped and prepared similarly (n = 12 each). These teeth were tested for their load capacity under a lingual load on a universal testing machine. Finite element models were used to examine the stresses on the reattached surfaces to help interpret the experimental results.ResultsThe buccal chamfer did not increase the load capacity when compared with the no-chamfer group. Lingual and circumferential chamfers respectively increased the fracture load by 36.9% and 32.3% in typodonts, and 78.5% and 33.3% in human incisors. The increase was statistically significant (p < 0.05). A higher fracture load tended to be accompanied by a larger area of deflected cohesive fracture. Finite element analysis showed that lingual and circumferential chamfers reduced the fracture-causing tensile stress at the lingual margin of the reattachment interface by approximately 70% and 60%, respectively, in human upper incisors.SignificanceIt was the joint design, and not the size of the bond area, that affected the load capacity of reattached incisors. Among the preparations considered, only those with a lingual chamfer could increase the load capacity of reattached incisors under a lingual load.