Low density biodegradable shape memory polyurethane foams for embolic biomedical applications |
| |
| Affiliation: | 1. Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94550, USA;2. Department of Biomedical Engineering, 5045 Emerging Technologies Building, 3120 Texas A&M University, College Station, TX 77843-3120, USA;1. Department of Materials Science and Engineering, Texas A&M University, College Station, TX 77843-3003, USA;2. Department of Biomedical Engineering, Texas A&M University, College Station, TX 77843-3120, USA;3. Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, USA;1. Department of Biomedical Engineering, Texas A&M University, MS 3120, 5045 Emerging Technologies Building, College Station, TX 77843, USA;2. Lawrence Livermore National Laboratory, 7000 East Ave., Livermore, CA 94550, USA;3. Texas Institute for Preclinical Studies, Texas A&M University, MS 4478, College Station, TX 77845, USA;4. Department of Mechanical Engineering, Texas A&M University, MS 3123, College Station, TX 77843, USA;1. Laboratory of Pharmaceutical Technology, Department of Pharmaceutics, Ghent University, Ghent, Belgium;2. Polymer Chemistry Research Group, Department of Organic Chemistry, Ghent University, Ghent, Belgium;3. Laboratory of Microbial Ecology and Technology, Faculty of Bioscience Engineering, Ghent University, Ghent, Belgium;4. Laboratory of Pharmaceutical Process Analytical Technology, Department of Pharmaceutics, Ghent University, Ghent, Belgium;1. Department of Biomedical and Chemical Engineering, Syracuse University, New York, 13244, USA;2. Syracuse Biomaterials Institute, Syracuse University, New York, 13244, USA;3. Department of Orthopedic Surgery, SUNY Upstate Medical University, Syracuse, NY 13210, USA |
| |
| Abstract: | Low density shape memory polymer foams hold significant interest in the biomaterials community for their potential use in minimally invasive embolic biomedical applications. The unique shape memory behavior of these foams allows them to be compressed to a miniaturized form, which can be delivered to an anatomical site via a transcatheter process and thereafter actuated to embolize the desired area. Previous work in this field has described the use of a highly covalently crosslinked polymer structure for maintaining excellent mechanical and shape memory properties at the application-specific ultralow densities. This work is aimed at further expanding the utility of these biomaterials, as implantable low density shape memory polymer foams, by introducing controlled biodegradability. A highly covalently crosslinked network structure was maintained by use of low molecular weight, symmetrical and polyfunctional hydroxyl monomers such as polycaprolactone triol (PCL-t, Mn = 900 g), N,N,N0,N0-tetrakis(hydroxypropyl)ethylenediamine and tris(2-hydroxyethyl)amine. Control over the degradation rate of the materials was achieved by changing the concentration of the degradable PCL-t monomer and by varying the material hydrophobicity. These porous SMP materials exhibit a uniform cell morphology and excellent shape recovery, along with controllable actuation temperature and degradation rate. We believe that they form a new class of low density biodegradable SMP scaffolds that can potentially be used as “smart” non-permanent implants in multiple minimally invasive biomedical applications. |
| |
| Keywords: | Shape memory polyurethane Polycaprolactone triol Low density foams Degradation rate FTIR |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
