Analysis of setup uncertainties for extremity sarcoma patients using surface imaging

PurposeProper positioning of patients with extremity sarcoma tumors can be challenging. A surface imaging technique was utilized to quantify the setup uncertainties for sarcoma patients and to assess whether surface imaging could improve the accuracy of patient positioning.Methods and materialsPretreatment and posttreatment 3-dimensional (3D) surface images were obtained for 16 patients and 236 treatments. Offline surface registration was performed to quantify interfraction and intrafraction setup errors, and the required planning target volume (PTV) margins were calculated. Setup differences were also assessed using root mean square (RMS) error analysis.ResultsFor intrafraction variation, the mean 3D vector shift was 2.1 mm, and the systematic and random errors were 1.3 mm or less. When using a reference surface from the first fraction, the mean interfraction setup variation (3D vector shift) was 7.6 mm. Systematic and random errors were 3-4 mm in each direction. When using a computed tomographic based reference surface, the mean 3D vector shift was 9.5 mm. Systematic and random errors ranged from 3.1 to 7.9 mm. The required PTV margins were 1.0 cm, 1.2 cm, and 1.3 cm in the anterior–posterior, superior–inferior, and lateral directions, respectively. The mean (standard deviation) RMS errors for the uncorrected position were 4.7 mm (1.9 mm) and were reduced to 2.2 mm (0.8 mm) and 1.7 mm (0.8 mm), for 4 degree of freedom (DOF) and 6 DOF surface alignment, respectively.ConclusionsIntrafraction motion is small. Interfraction motion can exceed typical PTV margins and daily imaging should be utilized to reduce setup variations. Surface imaging may reduce setup errors and is a feasible technique for daily image guidance.