|
|||||
|
|
| 莪术挥发油提取工艺的研究 | |
| 引用本文： | 夏超,马健,刘媛,石金城,孙兴华,林本青,樊明.莪术挥发油提取工艺的研究[J].中国医药指南,2011,9(21):20-21. |
| 作者姓名： | 夏超 马健 刘媛 石金城 孙兴华 林本青 樊明 |
| 作者单位： | 1. 江苏南京工业大学(江苏省药物研究所有限公司),江苏,南京,210009 2. 中国水利水电第十三工程局职工医院药械科,山东,济南,253009 3. 江苏南京工业大学,江苏,南京,210009 |
| 摘 要： | 目的利用正交设计优选法确定提取莪术挥发油的最佳工艺条件。方法以莪术油的含量为指标,通过L9(34)正交试验设计,对提取工艺中的浸泡时间、提取时间、加水量和药材粒度4个因素进行优选研究,以筛选出莪术挥发油的最佳提取工艺条件。结果影响提取的主次因素为:提取时间>药材粒度>浸泡时间>加水量。优选得到的最佳提取工艺条件是浸泡12h,提取5h,加水7倍,药材粒度为粒状。结论本工艺条件科学合理,稳定可行,可有效保证产品质量。 |
| 关 键 词： | 莪术 提取 正交设计 |
Study on the Extraction of Rhizoma Curcumae |
|
| XIA Chao,MA Jian,LIU Yuan,SHI Jin-cheng,SUN Xing-hua,LIN Ben-qing,FANG Ming.Study on the Extraction of Rhizoma Curcumae[J].Guide of China Medicine,2011,9(21):20-21. | |
| Authors: | XIA Chao MA Jian LIU Yuan SHI Jin-cheng SUN Xing-hua LIN Ben-qing FANG Ming |
| Institution: | XIA Chao1,MA Jian2,LIU Yuan1,SHI Jin-cheng1,SUN Xing-hua3,LIN Ben-qing3,FANG Ming3(1.Nanjing University of Technology,Jiangsu Provincial Institute of Materia Medica,Nanjing 210009,China,2 Department of Medical Device,China Water Conservancy and Hydropower Thirteenth Engineering Bureau Worker's Hospital,Jinan 253009,3.Nanjing University of Technology,Nanjing 210009 Jiangsu,China) |
| Abstract: | Objective To optimize the optimum extracting process of Rhizoma Curcumae by orthogonal design.Methods An orthogonal design table L 9(34)was used with the factors of soaking time;extraction time;water-adding amount and medicinal size.Results The factors influencing the extraction efficiency were as follows:extraction time>medicinal size>soaking time>water-adding amount.The optimum extraction condition obtained was soaking 12 hours,extraction time 5 hours,7 folds of the materials weight and size for the granu... |
| Keywords: | Rhizoma Curcumae Extract Orthogonal test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |