Hydrodeoxygenation of 2,5-dimethyltetrahydrofuran over bifunctional Pt–Cs2.5H0.5PW12O40 catalyst in the gas phase: enhancing effect of gold期刊界 All Journals 搜尽天下杂志传播学术成果专业期刊搜索期刊信息化学术搜索

按检索

Catalyst	Surface area^a (m² g⁻¹)	Pore volume^b (cm³ g⁻¹)	Pore diameter^c (Å)	D ^d	d ^e (nm)
Hydrodeoxygenation of 2,5-dimethyltetrahydrofuran over bifunctional Pt–Cs2.5H0.5PW12O40 catalyst in the gas phase: enhancing effect of gold

Authors:	Hanan Althikrallah Elena F Kozhevnikova Ivan V Kozhevnikov

Institution:	University of Liverpool, Department of Chemistry, Liverpool L69 7ZD UK.; Department of Chemistry, King Faisal University, College of Science, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia,

Abstract:	2,5-Dimethyltetrahydrofuran (DMTHF) is deoxygenated to n-hexane with >99% selectivity at mild conditions (90 °C, 1 bar H₂ pressure, fixed-bed reactor) in the presence of the bifunctional metal-acid catalyst Pt–CsPW comprising Pt and Cs_2.5H_0.5PW₁₂O₄₀ (CsPW), an acidic Cs salt of Keggin-type heteropoly acid H₃PW₁₂O₄₀. Addition of gold to the Pt–CsPW catalyst increases the turnover rate at Pt sites more than twofold, whereas the Au alone without Pt is not active. The enhancement of catalyst activity is attributed to PtAu alloying, which is supported by STEM-EDX and XRD analysis. Addition of gold to the Pt–CsPW catalyst has an enhancing effect on the HDO of DMTHF, with a twofold increase of turnover rate at Pt sites. Biomass-derived furanic compounds are of interest as a renewable feedstock, which can be processed into a range of value-added chemicals and green fuels via catalytic hydroconversion.^1–8 Hydrodeoxygenation (HDO) of furanic compounds using bifunctional metal–acid catalysis has been demonstrated to be an effective strategy to produce green fuels under mild conditions^3,4,6,8–12 and references therein. The HDO over bifunctional metal-acid catalysts is much more efficient compared to the reaction over monofunctional metal catalysts.^11,12 Previously, we have reported HDO of a wide range of oxygenates in the gas phase to produce alkanes in the presence of bifunctional catalysts comprising Pt, Ru, Ni and Cu as metal components and Keggin-type heteropoly acids, with their activity decreasing in the order Pt > Ru > Ni > Cu.^13,14 Pt–CsPW comprising Pt and strongly acidic heteropoly salt Cs_2.5H_0.5PW₁₂O₄₀ (CsPW) has been reported to be a highly efficient catalyst for the HDO of 2,5-dimethylfuran (DMF) and 2,5-dimethyltetrahydrofuran (DMTHF) to produce n-hexane with 100% yield at 90–120 °C and ambient pressure.^11,12 The HDO of DMTHF over Pt–CsPW occurs through a sequence of hydrogenolysis, dehydration and hydrogenation steps catalysed by Pt and proton sites of the bifunctional catalyst (Scheme 1). These include the ring opening of DMTHF to form 2-hexanol on Pt sites followed by its dehydration on proton sites of CsPW to hexene, which is finally hydrogenated to n-hexane on Pt sites.¹² It is the facile dehydration of the secondary alcohol intermediate that drives the HDO process forward.^11,12 The rate-limiting step is either the ring hydrogenolysis or 2-hexanol dehydration depending on the ratio of accessible surface metal and acid sites Pt/H⁺.¹² Other platinum group metals such as Pd, Ru and Rh, that have high selectivity to ring hydrogenation rather than ring hydrogenolysis,^2,7 have low activities in HDO of DMF and DMTHF.¹¹ Open in a separate window Scheme 1Reaction pathway for hydrodeoxygenation of DMTHF over Pt–CsPW.Bimetallic PtAu and PdAu catalysts have been reported to have an enhanced performance in comparison to monometallic Pt and Pd catalysts,^15–31 for example, in hydrogenation,^16,21,29 hydrodesulphurisation,^27,28 oxidation,^22,24 isomerisation^15,19,30,31 and other reactions.^{17,18,20,25,26} The enhancement of catalyst performance by addition of gold can be attributed to geometric (ensemble) and electronic (ligand) effects of the constituent elements in PtAu and PdAu bimetallic species.^25,26Here we looked at the effect of Au on the performance of Pt–CsPW catalysts in the HDO of DMTHF in the gas phase (see the ESI for experimental details^†). The CsPW heteropoly salt is a well-known solid acid catalyst; it possesses strong proton sites, large surface area and high thermal stability (∼500 °C decomposition temperature).^9,32–34 Supported bimetallic catalysts PtAu/SiO₂ and PtAu/CsPW were prepared by co-impregnation of H₂PtCl₆ and HAuCl₃ onto SiO₂ and CsPW followed by reduction with H₂ at 250 °C (ESI^†). This method gives supported bimetallic PtAu nanoparticles of a random composition together with various Pt and Au nanoparticles.^15,16,31 Information about the catalysts studied is given in
Cs_2.5H_0.5PW₁₂O₄₀ (CsPW)	135	0.089	27
6.5% Au/SiO₂	257	1.01	157	0.019^f	46^g, 38ⁱ
4.7% Au/CsPW	103	0.048	33	0.016^f	60^g
6.4% Pt/SiO₂	266	1.06	159	0.28 ± 0.04^h	3.2^f, 8.0^g, 5ⁱ
6.0% Pt/CsPW	84	0.052	25	0.17 ± 0.03^h	5.3^f
6.6% Pt/5.9% Au/SiO₂	240	1.08	179	0.29 ± 0.05^h	3.1^f
5.9% Pt/4.4% Au/CsPW	91	0.082	36	0.17 ± 0.04^h	5.3^f

Open in a separate window^aBET surface area.^bSingle point total pore volume.^cAverage BET pore diameter.^dMetal dispersion.^eMetal particle size.^fCalculated from the equation d (nm) = 0.9/D.^gMetal particle diameter from powder XRD (Scherrer equation).^hPt dispersion determined by H₂/O₂ titration (average from three measurements); for PtAu catalysts, assumed negligible H₂ adsorption on gold (see the ESI).ⁱFrom STEM.Powder X-ray diffraction (XRD) has been widely used for the characterization of supported Au alloy catalysts.²⁶ The XRD patterns for the silica-supported catalysts 6.4% Pt/SiO₂, 6.5% Au/SiO₂ and 6.6% Pt/5.9% Au/SiO₂ are shown in Fig. 1. As expected, the 6.4% Pt/SiO₂ and 6.5% Au/SiO₂ catalysts display the fcc pattern of Pt and Au metal nanoparticles. The Pt peaks are broader than the Au peaks, which indicates a higher dispersion of Pt particles, with an average particle size of 8.0 nm for Pt and 46 nm for Au, which is in agreement with the STEM values (Open in a separate window Fig. 1Powder XRD patterns of 6.4% Pt/SiO₂, 6.5% Au/SiO₂ and 6.6% Pt/5.9% Au/SiO₂; the pattern for 6.6% Pt/5.9% Au/SiO₂ shows broad 111], 200], 220] and 311] fcc PtAu alloy peaks in the range 38–40°, 44–48°, 65–68° and 78–81°, respectively.The pattern for the 6.6% Pt/5.9% Au/SiO₂ catalyst clearly shows the presence of PtAu bimetallic particles with broad 111], 200], 220] and 311] diffraction peaks of the fcc PtAu alloy between the corresponding diffractions of the pure metals in the range 38–40°, 44–48°, 65–68° and 78–81°, respectively. Fig. 2 shows the high-angle annular dark field (HAADF) STEM images of the three silica-supported catalysts 6.4% Pt/SiO₂, 6.5% Au/SiO₂ and 6.6% Pt/5.9% Au/SiO₂ with metal nanoparticles indicated as bright spots on the darker background. In the Pt/SiO₂ catalyst, there are two populations: small Pt particles of 5 nm size and coalesced Pt particles of a larger size. The Au/SiO₂ catalyst displays Au particles of spherical, rectangular and triangular morphology, with an average size of 38 nm. The bimetallic PtAu/SiO₂ catalyst shows a high agglomeration and different kinds of morphology of metal particles.Open in a separate window Fig. 2HAADF-STEM images of (a) 6.4% Pt/SiO₂, (b) 6.5% Au/SiO₂ and (c) 6.6% Pt/5.9% Au/SiO₂ catalysts, showing noble metal nanoparticles as bright spots.The energy dispersive X-ray spectroscopic analysis (EDX) of metal particles in the PtAu/SiO₂ catalyst shows that these particles contain both platinum and gold. EDX elemental mapping clearly demonstrates that Pt and Au maps cover the same areas of PtAu/SiO₂ catalyst (Fig. 3), indicating PtAu alloying with formation of a non-uniform bimetallic PtAu particles. More EDX mapping is presented in the ESI (Fig. S1^†).Open in a separate window Fig. 3HAADF-STEM image of 6.6% Pt/5.9% Au/SiO₂ catalyst and the corresponding STEM-EDX elemental maps showing the spatial distribution of Au (red) and Pt (green) in the sample.STEM–EDX for CsPW-supported Pt, Au and PtAu catalysts has been reported elsewhere.¹⁶ These STEM images are difficult to analyse due to W, Pt and Au having similar large atomic numbers Z (74, 78, and 79, respectively). Crystalline CsPW containing 70 wt% of W displays a strong background which makes it difficult to discern smaller Pt and Au particles from the Z-contrast HAADF images and determine accurately metal particle size. Nevertheless, the STEM-EDX analysis indicates the presence of bimetallic PtAu particles in the PtAu/CsPW catalyst with a wide range of Pt/Au atomic ratios.¹⁶Representative results for HDO of DMTHF in the presence of bifunctional metal-acid catalysts Pt–CsPW and PtAu–CsPW, which were used as physical mixtures of metal and acid components at similar Pt loadings, are shown in †). The molar ratio of surface metal and proton sites in the catalysts was chosen low enough (Pt/H⁺ = 0.03–0.1) to ensure the reaction being limited by the DMTHF ring opening step.¹² The density of surface Pt sites was estimated from the Pt dispersion (32,33 and the CsPW surface area of 135 cm² g⁻¹ (

Entry

Catalyst

Conversion (%)

TOF^b (h⁻¹)

Product selectivity (% mol)

n-Hexane

2-Hexanol

CsPW

2.1

4.7% Au/CsPW + CsPW

2.2

6.0% Pt/CsPW + CsPW

8.6

98.6

0.7

5.9% Pt/4.4% Au/CsPW + CsPW

170

98.6

0.8

6.5% Au/SiO₂ + CsPW

1.9

6.4% Pt/SiO₂ + CsPW

390

99.4

0.5

6.6% Pt/5.9% Au/SiO₂ + CsPW

490

99.6

0.3

6.4% Pt/SiO₂ + CsPW^c

8.0

150

98.6

1.2

6.6% Pt/5.9% Au/SiO₂ + CsPW^c

260

98.5

0.7

Open in a separate window^a0.20 g total catalyst weight (physical mixture of 0.020 g metal catalyst + 0.18 g CsPW), 0.6% Pt, 90 °C, 2.3 kPa DMTHF, 20 ml min⁻¹ H₂ flow rate, catalyst pre-treatment at 90 °C for 1 h in H₂ flow, 1 h TOS.^bTOF values per Pt surface site, the contribution of Au and CsPW subtracted.^cCatalyst bed contained 0.005 g metal catalyst + 0.18 g CsPW; catalyst pre-treatment at 250 °C for 1 h in H₂ flow.In the absence of Pt, the CsPW alone (entry 1) and Au–CsPW (entries 2 and 5) showed a negligible activity (1.9–2.2% DMTHF conversion with practically no 2-hexanol and n-hexane formed). Physically mixed Pt–CsPW catalysts, Pt/CsPW + CsPW and Pt/SiO₂ + CsPW (1 : 9 w/w), exhibited a high activity giving >99% n-hexane selectivity at 8.0 to 85% DMTHF conversion depending on the catalyst and reaction conditions, in agreement with the previous report.¹² It should be noted that the catalyst based on Pt/SiO₂ had almost 6-fold greater activity than the one based on Pt/CsPW in terms of turnover frequency (TOF) per surface Pt site (cf. entries 3 and 6), thus demonstrating a strong effect of Pt support.As can be seen from 15,31The enhancement of catalyst activity by addition of gold has been attributed to geometric (ensemble) and electronic (ligand) effects of the constituent metals in PtAu bimetallic nanoparticles.²⁶ The XRD and STEM-EDX data shown above clearly demonstrate PtAu alloying in the PtAu/SiO₂ catalyst leading to the formation of bimetallic PtAu species. The same has also been reported for the PtAu/CsPW catalyst.¹⁶ Previously, it has been shown that the HDO of DMTHF on Pt–CsPW is a structure-sensitive reaction,¹² hence the geometric effects may be expected to contribute to the gold enhancement. However, in order to prove the role of geometric and electronic effects as the cause of the gold enhancement, more accurate metal dispersion measurements complemented by spectroscopic characterisation will be required.We also tested the performance of bifunctional PdAu/SiO₂ + CsPW and PtPd/SiO₂ + CsPW bimetallic catalysts under similar conditions in comparison to the corresponding monometallic Pd and Pt catalysts. However, no enhancement of activity was observed. This is in agreement with XRD analysis, which showed no distinct PdAu alloying in PdAu/SiO₂ (Fig. S2 in the ESI^†).In conclusion, we have demonstrated that the addition of gold to the Pt–CsPW catalyst has an enhancing effect on the HDO of DMTHF, increasing the turnover rate at Pt sites more than twofold. The enhancing effect is attributed to PtAu alloying. The formation of bimetallic PtAu nanoparticles in the PtAu–CsPW catalyst is confirmed by STEM-EDX and XRD. Keywords:

设为首页 | 免责声明 | 关于勤云 | 加入收藏