Effect of laser activated bleaching on the chemical stability and morphology of intracoronal dentin

ObjectivesTo evaluate the effect of the bleaching with 35% hydrogen peroxide either activated or not by a 970 nm diode laser on the chemical stability and dentin surface morphology of intracoronary dentin.MethodsTwenty-seven slabs of intracoronary dentin specimens (3 × 3 mm) were distributed into three groups (n = 9), according to surface treatment: HP – 35% hydrogen peroxide (1 × 4’), DL – 970 nm diode laser (1 × 30”/0,8W/10 Hz), HP + DL – 35% HP activated with 970 nm diode laser (1 × 30”/0,8W/10 Hz leaving the gel in contact to the surface for 4′ after activation). Three Raman spectra from each fragment were obtained to calculate the mean intensity of peaks of inorganic component (a.u.), organic collagen content (a.u.), and the ratio of inorganic/organic content, before and after treatment. Analyses of the samples by confocal laser microscopy were performed to evaluate the surface roughness, percentage of tubules, perimeter and area percentage of tubules, before and after treatment. Data were analyzed by Kruskal-Wallis, Dunn’s, and Wilcoxon test (P < 0.05).ResultsData analysis showed that HP + DL did not change the inorganic content peaks 8.31 29.78] or the inorganic/organic ratio 3.37 14.67] (P > 0.05). Similarly, DL did not affect the chemical stability of the dentin surface (P > 0.05). However, HP significantly increased inorganic content peaks 10.87 22.62], as well as the inorganic/organic ratio 6.25 27.78] (P < 0.05). Regarding the morphological alterations, all surface treatments increase tubules exposure; HP treatment significantly increases perimeter and area percentage; and HP + DL increases surface roughness.ConclusionsBleaching HP combined with DL offers an improvement in terms of intracoronal dentin surface protection, yielding better maintenance of dentin chemical stability and morphology.