Modulation of platelet aggregation after percutaneous transluminal angioplasty of the iliac artery for atherosclerosis obliterans

BACKGROUND: Platelet aggregation is modulated by blood flow. We investigated whether platelet function is altered during percutaneous transluminal balloon angioplasty in patients with atherosclerosis obliterans. METHODS: Blood samples were obtained from the iliac artery in 9 lower limbs of 7 patients undergoing percutaneous balloon angioplasty of the iliac artery. An agonists-induced platelet aggregation test was performed with an aggregometer. Femoral blood flow was measured with a Doppler velocimeter before and after the procedure. RESULTS: Before dilatation, the maximum platelet aggregation rates (+/- SEM) induced by adenosine phosphate, epinephrine, and arachidonic acid were 54.7% +/- 5.8%, 64.8% +/- 4.3%, and 60.5% +/- 6.1%, respectively. After angioplasty, these values reduced to 36.7% +/- 4.1%, 36.1% +/- 8.6%, and 40.1% +/- 5.0%, respectively (P < .05). The pre-procedural ankle-brachial pressure index, mean flow rate, mean velocity, and shear stress variation were 0.63 +/- 0.1, 218.1 +/- 32.1 mL/min, 9.4 +/- 1.1 cm/sec, and 60.6 +/- 17.7 dyne/cm2, respectively. The mean velocity at the stenotic lesion was 215.1 +/- 83.9 cm/sec, which was significantly greater than those of the distal artery or after angioplasty (P < .01). Both ankle-brachial pressure index and shear stress variation increased after angioplasty to 0.99 +/- 0.07 (P < .05) and 139.8 +/- 17.0 (P < .05) dyne/cm2, but the mean flow rate and the mean velocity (198.3 +/- 24.5 mL/min and 8.8 +/- 1.2 cm/sec after angioplasty) did not change significantly. CONCLUSIONS: These results indicate that activated platelet function at a stenosed artery was decreased after angioplasty, possibly because of normalized blood flow with reduction of stenotic lesion.