Model Analysis of Tissue Responses to Transient and Chronic Heating

Thermal models are used to analyze responses of muscle and lung tissue to transient (30–45 min) and chronic (4–7 week) heating in vivo. The general bioheat model, which describes one-dimensional temperature dynamics, incorporates heat conductance and perfusion. In general, perfusion changes with time and distance from a heated surface. One of the main objectives of this study was to analyze long-term perfusion change, which reflects tissue adaptation associated with angiogenesis. The database for these models was obtained using heated disks implanted in calves for up to seven weeks. Tissue temperature distributions were obtained repeatedly from thermistors protruding 1 to 10 mm from the heated disk surface. The perfusion parameter was estimated from the transient experiments at least several times each week by nonlinear, least-squares fitting of the model predicted temperature to the measured temperature response.Chronic heating at a heat flux 0.08 W/cm² caused perfusion of muscle tissue to increase with postimplant day (PID). Under the same conditions, lung tissue perfusion increased with chronic heating from early to late PID, but less than that for muscle tissue. During chronic heating above 42 °C and below 50 °C, a decrease in tissue temperature is associated with higher perfusion that develops with time. Over seven weeks, perfusion of muscle tissue near the heated disk surface increased by about 70% at 0.08 W/cm² and 40% at 0.06 W/cm². Furthermore, the model can be used to predict tissue and perfusion changes continuously over weeks for heat fluxes around 0.08 W/cm². © 2003 Biomedical Engineering Society.PAC2003: 8719Pp, 8719Uv, 8710+e, 8719Ff