| 两种底板设计的国产陶瓷托槽剪切粘接强度的研究 |
| |
| 引用本文： | 封平平,杨力,白玉兴,王邦康. 两种底板设计的国产陶瓷托槽剪切粘接强度的研究[J]. 北京口腔医学, 2010, 18(2): 73-76. DOI: 10.3969/j.issn.1006-673X.2010.02.004 |
| |
| 作者姓名： | 封平平 杨力 白玉兴 王邦康 |
| |
| 作者单位： | 首都医科大学口腔医学院正畸科,北京,100050;首都医科大学口腔医学院正畸科,北京,100050;首都医科大学口腔医学院正畸科,北京,100050;首都医科大学口腔医学院正畸科,北京,100050 |
| |
| 摘 要： | 目的评价两种不同底板设计的国产多晶体氧化铝陶瓷托槽的剪切粘接强度。方法实验组为国产沟槽底板和网格底板陶瓷托槽,对照组为临床常用的多晶体氧化铝陶瓷托槽Crystaline IV。30颗离体上颌双尖牙随机分为3组,每组10颗,使用37%液体磷酸和京津釉质粘接剂分别粘接上述三种托槽,在0.9%生理盐水中室温保存24h。使用WDW3050型微机控制电子万能试验机检测剪切粘接强度。托槽脱落后记录粘接剂残留指数、陶瓷托槽的折断数目和釉质表面出现肉眼可见缺损的牙齿数目。结果国产沟槽底板、网格底板陶瓷托槽及Crystaline IV的剪切粘接强度分别为12.10±2.69MPa、10.17±2.55MPa及14.66±2.39MPa。Crystaline IV和国产网格底板陶瓷托槽剪切粘接强度的差异有显著性意义。三种陶瓷托槽的主要脱开部位均在粘接剂内,所有样本未出现陶瓷托槽折断和肉眼可见的釉质缺损。结论两种国产陶瓷托槽均能够获得足够的剪切粘接强度。
|
| 关 键 词： | 陶瓷托槽 剪切粘接强度 |
Evaluation of the shear bond strength of two kinds of domestic ceramic brackets with different base design |
| |
| FENG Ping-ping,YANG Li,BAI Yu-xing,WANG Bang-kang. Evaluation of the shear bond strength of two kinds of domestic ceramic brackets with different base design[J]. Beijing Journal Of Stomatology, 2010, 18(2): 73-76. DOI: 10.3969/j.issn.1006-673X.2010.02.004 |
| |
| Authors: | FENG Ping-ping YANG Li BAI Yu-xing WANG Bang-kang |
| |
| Affiliation: | FENG Ping-ping,YANG Li,BAI Yu-xing,WANG Bang-kang.Department of Orthodontics,Capital Medical University School of Stomatology,Beijing 100050,China |
| |
| Abstract: | Objective To evaluate the shear bond strength of two kinds of domestic ceramic brackets.MethodsThe experimental group was composed of domestic ceramic brackets of different base design,groove base and grid base.The control group was Crystaline IV commonly used in clinic.Thirty extracted human maxillary premolars were selected for bonding.37% phosphoric-acid and dental enamel bonding resin were used.All bonded specimens were placed in saline for 24 hours at room temperature,and were tested on DWD3050 electro... |
| |
| Keywords: | Ceramic brackets Shear bond strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
